Panasonic Progressive Wide Hospitality Plasma Display Th 37pg9 Operating Instructions

31
Reduces power consumption
Press to select 
“POWER SAVE”
“STANDBY SAVE”
“POWER MANAGEMENT”
“AUTO POWER OFF”.
Press to select “ON” or “OFF”.
On  Off
Press to exit from SET UP. • POWER SAVE:  When this function is turned ON, luminous level of the Plasma Display is suppressed, so 
power consumption is reduced.
• STANDBY SAVE: When this function is turned ON, power consumption of the microcomputer is reduced during 
power supply standby (see page 12, 14-15), so standby power of the set is reduced.
• POWER...

32
SET UP for Input Signals
3D Y/C FILTER – For NTSC AV images
COMPONENT / RGB IN SELECT
Select to match the signals from the source connected to the COMPONENT / RGB input terminals.
Y,  P
B, PR signals   “COMPONENT”
R, G, B, HD, VD signals   “RGB”
Press to display the SET UP menu.
Press to select the “COMPONENT / RGB-IN 
SELECT”.
Press to select the desired mode.
COMPONENT  RGB
Press to exit from adjust mode.
Select “SIGNAL” from the “SET UP” menu during VIDEO (S VIDEO) input signal mode.
(“SIGNAL...

33
3:2 PULLDOWN / VIDEO NR COLOR SYSTEM / Panasonic AUTO
Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input
signal mode.(“SIGNAL [VIDEO]” menu is displayed.)
SET UP for Input Signals
Press to select the “COLOR SYSTEM” or “Panasonic 
AUTO”.
Press to select each function.
If the image becomes unstable:
With the system set on Auto, under conditions of low 
level or noisy input signals the image may in rare 
cases become unstable. Should this occur, set the 
system to match the format of the...

34
SET UP for Input Signals
Select SIGNAL from the “SET UP” menu during RGB input signal.
Press to adjust.
Press to exit from adjust mode.
SYNC
Setting RGB sync signal
Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT 
signal).
AUTO:  The H and V sync or synchronized signal are automatically selected. 
If both input, it is selected the H and V sync.
ON G:  Uses a synchronized signal on the Video G signal, which is input from 
the G connector.
VBS:  Uses a synchronized...

35
Options Adjustments
1
2
3
5Press to display the Setup menu.
Press to select “OSD Language”.
Press and hold until the Options menu is displayed.
Press to select your preferred menu.
Press to adjust the menu.
Press to confirm.
Press to exit from Options menu.
4
6
Item Effect Adjustments
Off-timer
function
EnableDisable
Enable:  Switches the “Off-timer function” “On”
Disable:  Switches the “Off-timer function” “Off”
Note:  When “Disable” is set, the Off-timer is cancelled.
Onscreen
display
On Off
On:...

36
Options Adjustments
Item Effect Adjustments
Initial VOL 
level
Off On
Press button to adjust the volume when TV is turned on.
Off  On
Off:  Sets normal volume.
On:  Sets your preferred volume.
Notes:
•
When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range.•You can hear the changed volume regardless of your volume setting before opening the options menu if you 
adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.
Maximum VOL 
level...

37
Options Adjustments
Normalization
When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “Remote 
ID” adjustments, set all the values “Off” so that all the buttons are enabled again.
Press the 
 button on main unit together with  button on the remote control and hold for more than 5 seconds. The 
“SHIPPING” menu is displayed and the lock is released when it disappears.
2/3Options
OffOffOff
Off
0
Remote ID
Serial ID ID select Button lock
Remocon...

38
Shipping condition
This function allows you to reset the unit to the factory setting.
1
2
3
4
Press to display the SET UP menu.
Press to select “OSD LANGUAGE”.
Press and hold till the SHIPPING menu is 
displayed.
Press to select “YES”.
Press to confirm.
[from the unit]
1  Press the MENU button till the Setup menu is displayed.
2  Press the Volume Up “+” or Down “–” button to select “OSD LANGUAGE”.
3  Press and hold the ENTER button till the SHIPPING menu is displayed.
4  Press the Volume Up “+” or...

39
Troubleshooting
Before you call for service, determine the symptoms and make a few simple checks as shown below.
Symptoms
Checks
Picture Sound
InterferenceNoisy SoundElectrical Appliances
Cars / Motorcycles
Fluorescent light
Normal PictureNo SoundVolume
(Check whether the mute function has been activated on the remote control.)
No PictureNo SoundNot plugged into AC outlet
Not switched on
PICTURE and BRIGHTNESS/Volume setting
(Check by pressing the power switch or stand-by button on the remote...

40
PC input signals
Applicable input signals for Mini D-sub 15P (Component) / Mini D-sub 15P (RGB) (
 Mark)
Signal nameHorizontal
frequency (kHz)Vertical
frequency (Hz)Mini D-sub 15P 
(Component)Mini D-sub 15P 
(RGB)
1 525 (480) / 60i 15.73 59.94


2 525 (480) / 60p 31.47 59.94

1
3 625 (575) / 50i 15.63 50.00


4 625 (575) / 50p 31.25 50.00

5 750 (720) / 60p 45.00 60.00

6 750 (720) / 50p 37.50 50.00

7 1,125 (1,080) / 60i 33.75 60.00

8 1,125 (1,080) / 50i 28.13 50.00

9 1,125 (1,080) / 24p...