Panasonic Network Interface Unit Wj Nt314 Operating Instructions

51
[Default gateway]
When not using the DHCP function, enter the default
gateway of the unit. 
Default setting:192.168.0.1

0.*.*.*
*.*.*.0
255.*.*.*
*.*.*.255
127.0.0.1
Class D address (224.0.0.0 - 239.255.255.255)
Class E address (240.0.0.0 - 255.255.255.255)
* These IP addresses for the default gateway are
unavailable even when using the DHCP function.
Refer to the network administrator for the settings of
the DHCP server. 
[HTTP port]
Assign the port numbers independently. 
Available port number:1 -...

52
Notes:
•To access the unit via the Internet by connecting the unit to a broadband router, it is necessary to assign a
respective port number for each device and address translation by using the port forwarding function. For further
information, refer to the operating instructions of the broadband router in use.
•The port forwarding function changes a global IP address to a private IP address, and Static IP masquerade
and Network Address Translation (NAT) have this function. This function is to be set...

53
[DDNS]
Select ON or OFF to determine whether or not to use
the DDNS function. 
Default setting: OFF
[Host name]
Enter the host name to be used. 
Number of characters that can be entered:1 - 64
characters
Default setting:(blank)
[User name]
Enter the user name (login name) to access the DDNS
server. 
Number of characters that can be entered:1 - 32
characters
Default setting:(blank)
[Password]
Enter the password to access the DDNS server. 
Number of characters that can be entered:0 - 32
characters...

54
Configure the settings relating to SNMP [SNMP]
Click the [SNMP] tab on the Network setup page. (page 50)
The settings relating to SNMP can be configured on this page. It is possible to check the status of the unit by con-
necting to the SNMP manager. When using the SNMP function, contact the network administrator. 
[Community name]
Enter the community name to be monitored. 
Number of characters that can be entered:0 - 32
characters
Default setting:(blank)
Important: 
When using the SNMP function, it...

55
Configure the settings relating to the FTP periodic transmission [FTP periodic
transmission]
Click the [FTP] tab on the Network setup page. (page 50)
The settings relating to the periodic transmission of images to an FTP server can be configured on this page. To
transmit images to an FTP server periodically, it is necessary to configure the settings of the FTP server in advance.
(page 49) Refer to page 56 for descriptions of how to configure schedules of image transmission. 
Important: 
•Depending...

56
How to configure the schedule settings
Step 1
Check the check box of the desired day of the week.
→The selected day of the week will be validated for the
schedule. 
Step 2
To designate time, click [i] beside the hour and minute
and select the desired hour and minute.
When not designating time, check the checkbox of 24
hours. 
Step 3
Click the [SET] button after completing the settings. 
→The result will be displayed at the bottom of the win-
dow. 
How to delete the set schedule
Step 1
Uncheck the...

57
Maintenance of the unit [Maintenance]
System log check, firmware upgrade, and initialization of the setup menu can be performed on this page.
The Maintenance page has 3 tabs of the [System log] tab, the [Upgrade] tab and the [Initialization] tab. 
Check the system log [System log]
Click the [System log] tab of the Maintenance page.
Up to 320 KB (approx. 4 000 logs) system logs can be saved on the SD memory card when the SD memory card is
inserted after selecting Use for SD memory card on the [SD...

58
Upgrade the firmware [Upgrade]
Click the [Upgrade] tab of the Maintenance page. (page 57)
The current firmware can be checked and upgraded to the latest version on this page. Contact the dealer for further
information about the firmware upgrade.
[Model No.], [MAC address], [Serial number],
[Firmware version], [IPL version]
Information of each item will be displayed. 
How to upgrade the firmware
Step 1
Contact the dealer and download the latest firmware
onto a PC.
Important: 
A blank (space) cannot be...

59
Initialize/restart the unit [Initialization]
Click the [Initialization] tab of the Maintenance page. (page 57)
Initialization of the setup data and HTML files of the unit and restarting of the unit can be performed on this page.
[Initialize setup data (Except network setup data)]
Click the [Execute] button to reset the settings to the
default. Note that the network settings will not be reset.
It is impossible to operate the unit for around 3 minute
after the initialization. 
[Initialize HTML data]...

60
About the Displayed System Log
Error indications relating to SMTP
Category
POP3 server error
SMTP server error
Connection error
Internal errorAuthentication error
Failed to find POP3 server
SMTP authentication error
Other error Failed to resolve mail server
address from DNS
Failed to find SMTP server. 
MAIL FROM command error
RECP TO command errorEntered user name or password may be incorrect. Check if
the mail settings are configured correctly. 
•The IP address of the server may be incorrect. Check...