Home
>
Panasonic
>
TV Video Accessories
>
Panasonic Network Interface Unit Wj Nt314 Operating Instructions
Panasonic Network Interface Unit Wj Nt314 Operating Instructions
Here you can view all the pages of manual Panasonic Network Interface Unit Wj Nt314 Operating Instructions. The Panasonic manuals for TV Video Accessories are available online for free. You can easily download all the documents as PDF.
Page 31
![Page 31
31
Configure the settings relating to audio [Audio]
Click the [Audio] tab on the Camera setup page. (page 26)
The following are descriptions for when the settings relating to audio from CH1 is configured on this page.
[Audio mode]
Select the communication mode used for audio data
transmission/reception between the unit and the PC
from the following.
OFF:Does not transmit audio from the unit to the PC.
Therefore, the settings and controls relating to audio
will be invalidated.
Mic input:The PC receives...](http://img.usermanuals.tech/thumb/58/69391/w300_wj-nt314_en_om_d-30.png "Page 31
31
Configure the settings relating to audio [Audio]
Click the [Audio] tab on the Camera setup page. (page 26)
The following are descriptions for when the settings relating to audio from CH1 is configured on this page.
[Audio mode]
Select the communication mode used for audio data
transmission/reception between the unit and the PC
from the following.
OFF:Does not transmit audio from the unit to the PC.
Therefore, the settings and controls relating to audio
will be invalidated.
Mic input:The PC receives...")
31 Configure the settings relating to audio [Audio] Click the [Audio] tab on the Camera setup page. (page 26) The following are descriptions for when the settings relating to audio from CH1 is configured on this page. [Audio mode] Select the communication mode used for audio data transmission/reception between the unit and the PC from the following. OFF:Does not transmit audio from the unit to the PC. Therefore, the settings and controls relating to audio will be invalidated. Mic input:The PC receives...
Page 32
![Page 32
32
[Audio output port (PC to Unit )]
Enter the transmission port number (the port number on
the unit used to receive audio data transmitted from the
PC).
Available value:1024 - 50000 (Only even numbers are
available.)
Default setting:34004
Note:
The transmission port number entered for Audio
output port (PC to Unit) will be used only when
transmitting MPEG-4 images. When OFF is select-
ed for MPEG-4 transmission (page 27), it is not
necessary to enter the transmission port number.
[Authentication]...](http://img.usermanuals.tech/thumb/58/69391/w300_wj-nt314_en_om_d-31.png "Page 32
32
[Audio output port (PC to Unit )]
Enter the transmission port number (the port number on
the unit used to receive audio data transmitted from the
PC).
Available value:1024 - 50000 (Only even numbers are
available.)
Default setting:34004
Note:
The transmission port number entered for Audio
output port (PC to Unit) will be used only when
transmitting MPEG-4 images. When OFF is select-
ed for MPEG-4 transmission (page 27), it is not
necessary to enter the transmission port number.
[Authentication]...")
32 [Audio output port (PC to Unit )] Enter the transmission port number (the port number on the unit used to receive audio data transmitted from the PC). Available value:1024 - 50000 (Only even numbers are available.) Default setting:34004 Note: The transmission port number entered for Audio output port (PC to Unit) will be used only when transmitting MPEG-4 images. When OFF is select- ed for MPEG-4 transmission (page 27), it is not necessary to enter the transmission port number. [Authentication]...
Page 33
![Page 33
33
Configures the multi-screen settings [Multi-screen setup]
The cameras to be used for the multi-screen display can be registered on this page.
The following cameras are available for the multi-screen display. (As of August, 2007)
Cameras connected to WJ-NT314, cameras connected to the network, WV-NP240 series, WV-NP1000 series,
WV-NW470S series, WV-NP472, WV-NS320 series, WV-NS202, WV-NF284, WV-NS202A, WJ-NT304
[IP address]
Enter the IP address or the host name of the camera to
be used for the...](http://img.usermanuals.tech/thumb/58/69391/w300_wj-nt314_en_om_d-32.png "Page 33
33
Configures the multi-screen settings [Multi-screen setup]
The cameras to be used for the multi-screen display can be registered on this page.
The following cameras are available for the multi-screen display. (As of August, 2007)
Cameras connected to WJ-NT314, cameras connected to the network, WV-NP240 series, WV-NP1000 series,
WV-NW470S series, WV-NP472, WV-NS320 series, WV-NS202, WV-NF284, WV-NS202A, WJ-NT304
[IP address]
Enter the IP address or the host name of the camera to
be used for the...")
33 Configures the multi-screen settings [Multi-screen setup] The cameras to be used for the multi-screen display can be registered on this page. The following cameras are available for the multi-screen display. (As of August, 2007) Cameras connected to WJ-NT314, cameras connected to the network, WV-NP240 series, WV-NP1000 series, WV-NW470S series, WV-NP472, WV-NS320 series, WV-NS202, WV-NF284, WV-NS202A, WJ-NT304 [IP address] Enter the IP address or the host name of the camera to be used for the...
Page 34
![Page 34
34
Configure the AVMD settings [Video analytics setup]
The settings relating to the detection area, depth, and schedule for AVMD can be configured on the Video analytics
setup page.
The Video analytics setup page has 2 tabs of the [AVMD] tab, and the [Schedule] tab.
Set the detection program [AVMD]
Click the [AVMD] tab on the Video analytics setup page.
Set the detection program for AVMD. It is possible to set up to 8 preset positions (CH1 to CH4) for 8 detection pro-
grams.
It is possible to set...](http://img.usermanuals.tech/thumb/58/69391/w300_wj-nt314_en_om_d-33.png "Page 34
34
Configure the AVMD settings [Video analytics setup]
The settings relating to the detection area, depth, and schedule for AVMD can be configured on the Video analytics
setup page.
The Video analytics setup page has 2 tabs of the [AVMD] tab, and the [Schedule] tab.
Set the detection program [AVMD]
Click the [AVMD] tab on the Video analytics setup page.
Set the detection program for AVMD. It is possible to set up to 8 preset positions (CH1 to CH4) for 8 detection pro-
grams.
It is possible to set...")
34 Configure the AVMD settings [Video analytics setup] The settings relating to the detection area, depth, and schedule for AVMD can be configured on the Video analytics setup page. The Video analytics setup page has 2 tabs of the [AVMD] tab, and the [Schedule] tab. Set the detection program [AVMD] Click the [AVMD] tab on the Video analytics setup page. Set the detection program for AVMD. It is possible to set up to 8 preset positions (CH1 to CH4) for 8 detection pro- grams. It is possible to set...
Page 35
35 Notes: •Color in the ( ) beside the icon is the color to display the detection area. •Select a parameter from P1 (Blu) to P3 (Yel) when setting an area to detect an intruder. Alarm occurs when a moving object enters the area. It may take around 2 seconds since the person is detected until the alarm occurs. •Select P(Bro) when setting an area to detect the object abandonment or removal. Alarm occurs when an object is taken into the area or when the object is taken away from the area. •To detect the...
Page 36
![Page 36
36
Set the detection depth
It is possible to set the depth information for each detec-
tion program both automatically and manually.
•Set the depth automatically (page 36)
•Set the depth manually (page 37)
Set the depth automatically
Note:
To set the depth automatically, have a person move
forward and backward several times within the
image being detected.
Step 1
Click the [SET] button of Depth correction on the
[AVMD] tab.
→The Depth correction menu will be displayed.
Step 2
Select Auto setup for...](http://img.usermanuals.tech/thumb/58/69391/w300_wj-nt314_en_om_d-35.png "Page 36
36
Set the detection depth
It is possible to set the depth information for each detec-
tion program both automatically and manually.
•Set the depth automatically (page 36)
•Set the depth manually (page 37)
Set the depth automatically
Note:
To set the depth automatically, have a person move
forward and backward several times within the
image being detected.
Step 1
Click the [SET] button of Depth correction on the
[AVMD] tab.
→The Depth correction menu will be displayed.
Step 2
Select Auto setup for...")
36 Set the detection depth It is possible to set the depth information for each detec- tion program both automatically and manually. •Set the depth automatically (page 36) •Set the depth manually (page 37) Set the depth automatically Note: To set the depth automatically, have a person move forward and backward several times within the image being detected. Step 1 Click the [SET] button of Depth correction on the [AVMD] tab. →The Depth correction menu will be displayed. Step 2 Select Auto setup for...
Page 37
![Page 37
37
Set the depth manually
Step 1
Click the [SET] button of Depth correction on the
[AVMD] tab.
→The Depth correction menu will be displayed.
Step 2
Select Manual setup for Setup mode.
Step 3
Draw a marker by dragging the mouse between the
front side and rear side on the screen.
Notes:
•By dragging the mouse up and down, the size of
marker will become larger or smaller. (Horizontal to
vertical ratio is fixed to 1:3.)
•To retry drawing the marker, click [CLEAR] button.
•Assuming that people go forward and...](http://img.usermanuals.tech/thumb/58/69391/w300_wj-nt314_en_om_d-36.png "Page 37
37
Set the depth manually
Step 1
Click the [SET] button of Depth correction on the
[AVMD] tab.
→The Depth correction menu will be displayed.
Step 2
Select Manual setup for Setup mode.
Step 3
Draw a marker by dragging the mouse between the
front side and rear side on the screen.
Notes:
•By dragging the mouse up and down, the size of
marker will become larger or smaller. (Horizontal to
vertical ratio is fixed to 1:3.)
•To retry drawing the marker, click [CLEAR] button.
•Assuming that people go forward and...")
37 Set the depth manually Step 1 Click the [SET] button of Depth correction on the [AVMD] tab. →The Depth correction menu will be displayed. Step 2 Select Manual setup for Setup mode. Step 3 Draw a marker by dragging the mouse between the front side and rear side on the screen. Notes: •By dragging the mouse up and down, the size of marker will become larger or smaller. (Horizontal to vertical ratio is fixed to 1:3.) •To retry drawing the marker, click [CLEAR] button. •Assuming that people go forward and...
Page 38
![Page 38
38
Set the AVMD schedule [Schedule]
Click the [Schedule] tab on the Video analytics setup page.(page 34)
It is possible to set the schedule for each detection program.
For example, to monitor the entrance and exit, it is possible to set the detection program for the entrance between 6
a.m. and 12 a.m. on Monday to Friday, and for the exit between 4 p.m. and 12 p.m. on Monday to Friday.
How to configure the schedule settings
Step 1
Select the schedule number from Schedule 1 to
Schedule 8.
Step 2
Check...](http://img.usermanuals.tech/thumb/58/69391/w300_wj-nt314_en_om_d-37.png "Page 38
38
Set the AVMD schedule [Schedule]
Click the [Schedule] tab on the Video analytics setup page.(page 34)
It is possible to set the schedule for each detection program.
For example, to monitor the entrance and exit, it is possible to set the detection program for the entrance between 6
a.m. and 12 a.m. on Monday to Friday, and for the exit between 4 p.m. and 12 p.m. on Monday to Friday.
How to configure the schedule settings
Step 1
Select the schedule number from Schedule 1 to
Schedule 8.
Step 2
Check...")
38 Set the AVMD schedule [Schedule] Click the [Schedule] tab on the Video analytics setup page.(page 34) It is possible to set the schedule for each detection program. For example, to monitor the entrance and exit, it is possible to set the detection program for the entrance between 6 a.m. and 12 a.m. on Monday to Friday, and for the exit between 4 p.m. and 12 p.m. on Monday to Friday. How to configure the schedule settings Step 1 Select the schedule number from Schedule 1 to Schedule 8. Step 2 Check...
Page 39
![Page 39
39
How to delete the set schedule
Step 1
Select the schedule number from Schedule 1 to
Schedule 8.
Step 2
Uncheck the check box of the set day of the week.
Step 3
Click the [SET] button after completing the settings.
Step 4
To check the schedule on the time bar, click [i] and
select the channel number (detection program) from the
[CH No.] pull-down menu.](http://img.usermanuals.tech/thumb/58/69391/w300_wj-nt314_en_om_d-38.png "Page 39
39
How to delete the set schedule
Step 1
Select the schedule number from Schedule 1 to
Schedule 8.
Step 2
Uncheck the check box of the set day of the week.
Step 3
Click the [SET] button after completing the settings.
Step 4
To check the schedule on the time bar, click [i] and
select the channel number (detection program) from the
[CH No.] pull-down menu.")
39 How to delete the set schedule Step 1 Select the schedule number from Schedule 1 to Schedule 8. Step 2 Uncheck the check box of the set day of the week. Step 3 Click the [SET] button after completing the settings. Step 4 To check the schedule on the time bar, click [i] and select the channel number (detection program) from the [CH No.] pull-down menu.
Page 40
![Page 40
40
Configure the alarm settings [Alarm setup]
The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence and the
alarm occurrence notification can be configured on the Alarm setup page.
The Alarm setup page has 2 tabs of the [Alarm] tab, and the [Notification] tab.
Configure the settings relating to the alarm action [Alarm]
Click the [Alarm] tab on the Alarm setup page.
The settings relating to the alarm action can be configured on this page. Refer to pages...](http://img.usermanuals.tech/thumb/58/69391/w300_wj-nt314_en_om_d-39.png "Page 40
40
Configure the alarm settings [Alarm setup]
The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence and the
alarm occurrence notification can be configured on the Alarm setup page.
The Alarm setup page has 2 tabs of the [Alarm] tab, and the [Notification] tab.
Configure the settings relating to the alarm action [Alarm]
Click the [Alarm] tab on the Alarm setup page.
The settings relating to the alarm action can be configured on this page. Refer to pages...")
40 Configure the alarm settings [Alarm setup] The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence and the alarm occurrence notification can be configured on the Alarm setup page. The Alarm setup page has 2 tabs of the [Alarm] tab, and the [Notification] tab. Configure the settings relating to the alarm action [Alarm] Click the [Alarm] tab on the Alarm setup page. The settings relating to the alarm action can be configured on this page. Refer to pages...