Panasonic Network Function Edition PT-LB20NTU / PT-LB30NTU Instruction Manual

31
Wireless connection with password
Projector operations
This setting is used to limit the users that can connect to the projector.
Select [INPUT PASSWD] on the
network menu.
1
Select [ON] with the [ ] buttons.2
Select [AMEND PASSWD] at the
network menu and press the
[ENTER] button.3
Enter the password using the 
[ ] buttons.4
After entering the password,
select [OK] and press the [ENTER]
button.
To cancel the change, select [Cancel] and press
the [ENTER] button.
5
1
LB20NT
OFF
ON NETWORK
NAME CHANGE...

32
Computer operations (Wireless settings(See page 35))
Open the Windows TCP/IP Setting window, and set the TCP/IP.
(See page 33 or 34)
Refer to the Windows manual for a detailed description.
For the subnet mask, register the same value as the default projector network
[USER] setting.
For the IP address, enter the same value up to the “255” part of the default
subnet mask setting for projector network [USER], and then enter a different
value for the remainder.2
Start up the wireless card utility.
When...

33
Other Applications (Changing the Initial Settings)(cont.)
TCP/IP settings
Windows 2000/XP:
The screens show the example for Windows XP.
(1) Right-click [My Network Places] to open the Properties
window.
(2) Right-click the Wireless LAN icon being used to open
the Properties window.
(3) Select Internet Protocol (TCP/IP) and click
[Properties].
(4) Enter the same segment IP address as the IP address
set by the projector.
(5) Enter the same value as the subnet mask set by the
projector, set the gateway...

34
Other Applications (Changing the Initial Settings)(cont.)
Windows 98SE/Me:
The screens show the example for Windows Me.
(1) Right-click [My Network Places] to open the Properties
window.
(2) Right-click the Wireless LAN icon being used to open
the Properties window.
(3) Enter the same segment IP address as the IP address
set by the projector.
(4) Enter the same value as the subnet mask set by the
projector.
(5) Set the gateway (only in infrastructure mode) and click
[OK] to return to the previous...

35
Other Applications (Changing the Initial Settings)(cont.)
Windows XP (SP2):
The dedicated utility software is not necessary. Refer to the Windows XP manual for a
detailed description.
(1) Turn on the projector.
(2) Select  [Start] →[Connect To] →[Show all connections], and display the [Network
connections] window.
(3) Right-click [Wireless network connection], and left-click [View Available Wireless
Network].
(4) Select the projector’s SSID at [Choose a wireless network] (“Panasonic Projector”
is the...

36
Select [STATUS] in the network menu
(see page 28) and press [ENTER].
Your current settings appear.
Verifying settings
Other Applications (Changing the Initial Settings)(cont.)
1
LB20NT
OFF
ON NETWORK
NAME CHANGE 
INPUT PASSWD
AMEND PASSWD
WEB CONTROL
STATUS
DEFAULT
   SELECTNETWORK
RETRN
ENTER 

37
Returning to the Initial Settings
You can return the changed settings to the initial conditions.
Select [DEFAULT] at the network menu (See page 28)and
press the [ENTER] button.1
Select [OK] with the [ ] buttons and press the
[ENTER] button.
2
1
LB20NT
ON
ON NETWORK
NAME CHANGE 
INPUT PASSWD
AMEND PASSWD
WEB CONTROL
STATUS
DEFAULT
   SELECTNETWORK
RETRN
ENTER
DEFAULT SETTNIG
OKCANCEL
Projector operations
Start the Wireless Manager ME 2.0 and set the network
number to [1] 
(see page 29).
Computer...

38
Computer settings
Notes:
• When the projector settings have been changed using a WebBrowser, the
projector will not appear on the connection list until the projector network is
switched to [USER].
• After the projector network has been switched to [USER], manually release the
proxy settings of the WebBrowser used.
Using WebBrowser
Projector settings
WEB CONTROL
ON:This enables control on the WebBrowser.
OFF:This disables control on the WebBrowser.
Select [WEB CONTROL] on the network menu (See page...

39
Using WebBrowser(cont.)
Select [Security] and set the security level to [Default Level],
or select [Custom Level] and check the [Enable] checkbox
under [Active scripting].Right-click the [Internet Explorer]
icon.
Open the Properties window.
1
Open [Connections] →[LAN
Settings]. If [Use automatic
configuration script] has been
checked, remove the check, and
click [OK].
The setting window closes.
2
Note:
Under [Advanced] you must set the IP address of the projector to be connected for
not using the...

40
Using WebBrowser(cont.)
Starting up WebBrowser
Click [ ] on the launcher(see page 15)or start up the WebBrowser, and enter
the IP address set by the projector.
(The example below describes the case when using Microsoft Internet Explorer.)
WebBrowser starts up.
Top window
Notes:
• If you forget the password, set a new password on the projector side. (The former
password is protected by security, and cannot be viewed even by the projector.)
• The top window may not appear depending on the WebBrowser....