Panasonic Network Function Edition PT-LB20NTU / PT-LB30NTU Instruction Manual

							31
Wireless connection with password
Projector operations
This setting is used to limit the users that can connect to the projector.
Select [INPUT PASSWD] on the
network menu.
1
Select [ON] with the [ ] buttons.2
Select [AMEND PASSWD] at the
network menu and press the
[ENTER] button.3
Enter the password using the 
[ ] buttons.4
After entering the password,
select [OK] and press the [ENTER]
button.
To cancel the change, select [Cancel] and press
the [ENTER] button.
5
1
LB20NT
OFF
ON NETWORK
NAME CHANGE 
INPUT PASSWD
AMEND PASSWD
WEB CONTROL
STATUS
DEFAULT
   SELECTNETWORK
RETRN
ENTER
1
LB20NT
ON
ON NETWORK
NAME CHANGE 
INPUT PASSWD
AMEND PASSWD
WEB CONTROL
STATUS
DEFAULT
   SELECTNETWORK
RETRN
ENTER
AMEND PASSWD
BS OK Cancel
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz
0123456789
Computer operations
Refer to pages 14 and 27.
Other Applications (Changing the Initial Settings)(cont.) 
						

							32
Computer operations (Wireless settings(See page 35))
Open the Windows TCP/IP Setting window, and set the TCP/IP.
(See page 33 or 34)
Refer to the Windows manual for a detailed description.
For the subnet mask, register the same value as the default projector network
[USER] setting.
For the IP address, enter the same value up to the “255” part of the default
subnet mask setting for projector network [USER], and then enter a different
value for the remainder.2
Start up the wireless card utility.
When using Windows XP, open [Control Panel] →
[Network Connections].
Make the same SSID,
communication mode and WEP
settings as the default projector
network [USER] settings.Default projector network [USER] settings
SSID : Panasonic Projector
Communication mode: 802.11 AdHoc
WEP : Off
1
Start up Wireless Manager ME 2.0, select [USER] from the
network number list, and set the network.
(See page 29)
Wait until the projector’s name appears on the connection list, select the name
displayed, and proceed with the connections.3
User connections (not using simple connections)
1
LB20NT
OFF
ON NETWORK
NAME CHANGE 
INPUT PASSWD
AMEND PASSWD
WEB CONTROL
STATUS
DEFAULT
   SELECTNETWORK
RETRN
ENTER
NETWORK
USER
ADJRETRN
ENTER
Select [NETWORK] on the network
menu, and press the [ENTER]
button.1
Select [USER] with the [ ]
buttons, and press the [ENTER]
button.2
Other Applications (Changing the Initial Settings)(cont.)
Projector operations (Network number settings)
If the projector and computer could not be connected by following the steps on page
12, connect them by performing the steps below.
Setting itemDefault projector network Example of 
[USER] setting computer setting
Subnet mask 255. 255. 255.  0
255. 255. 255. 0
IP address 192. 168. 10. 100192. 168. 10. 101
Setting Example 
						

							33
Other Applications (Changing the Initial Settings)(cont.)
TCP/IP settings
Windows 2000/XP:
The screens show the example for Windows XP.
(1) Right-click [My Network Places] to open the Properties
window.
(2) Right-click the Wireless LAN icon being used to open
the Properties window.
(3) Select Internet Protocol (TCP/IP) and click
[Properties].
(4) Enter the same segment IP address as the IP address
set by the projector.
(5) Enter the same value as the subnet mask set by the
projector, set the gateway (only in infrastructure
mode), and then click [OK] to return to the previous
window.
(6) Click [OK].
The new settings can be used without rebooting. 
						

							34
Other Applications (Changing the Initial Settings)(cont.)
Windows 98SE/Me:
The screens show the example for Windows Me.
(1) Right-click [My Network Places] to open the Properties
window.
(2) Right-click the Wireless LAN icon being used to open
the Properties window.
(3) Enter the same segment IP address as the IP address
set by the projector.
(4) Enter the same value as the subnet mask set by the
projector.
(5) Set the gateway (only in infrastructure mode) and click
[OK] to return to the previous window.
(6) Click [OK].
(7) Click [Yes]. 
						

							35
Other Applications (Changing the Initial Settings)(cont.)
Windows XP (SP2):
The dedicated utility software is not necessary. Refer to the Windows XP manual for a
detailed description.
(1) Turn on the projector.
(2) Select  [Start] →[Connect To] →[Show all connections], and display the [Network
connections] window.
(3) Right-click [Wireless network connection], and left-click [View Available Wireless
Network].
(4) Select the projector’s SSID at [Choose a wireless network] (“Panasonic Projector”
is the default setting for network [USER]), and then click [Connect To].
Notes:
• When encryption (WEP setting) is set by the projector, enter the WEP key
(character input) information to [Network Key] before clicking [Connect To]. 
(default setting: No WEP)
• To check the detailed network settings, click the [Wireless network settings] icon
at the network connection window.
Windows 98SE/Me/2000:
Start the utility software for your wireless LAN card to make the settings. See the
User’s Manual for your LAN card for details.
Note:
Do not use the utility software during simple connection, as this may cause a
problem in connection with the projector. (For instance, the “Projector search in
progress” message may appear on the connection select window list.)
Wireless settings 
						

							36
Select [STATUS] in the network menu
(see page 28) and press [ENTER].
Your current settings appear.
Verifying settings
Other Applications (Changing the Initial Settings)(cont.)
1
LB20NT
OFF
ON NETWORK
NAME CHANGE 
INPUT PASSWD
AMEND PASSWD
WEB CONTROL
STATUS
DEFAULT
   SELECTNETWORK
RETRN
ENTER 
						

							37
Returning to the Initial Settings
You can return the changed settings to the initial conditions.
Select [DEFAULT] at the network menu (See page 28)and
press the [ENTER] button.1
Select [OK] with the [ ] buttons and press the
[ENTER] button.
2
1
LB20NT
ON
ON NETWORK
NAME CHANGE 
INPUT PASSWD
AMEND PASSWD
WEB CONTROL
STATUS
DEFAULT
   SELECTNETWORK
RETRN
ENTER
DEFAULT SETTNIG
OKCANCEL
Projector operations
Start the Wireless Manager ME 2.0 and set the network
number to [1] 
(see page 29).
Computer operations
Note:
You will be prompted to enter the password if ON has been selected as the [INPUT
PASSWD] setting on the security menu. 
						

							38
Computer settings
Notes:
• When the projector settings have been changed using a WebBrowser, the
projector will not appear on the connection list until the projector network is
switched to [USER].
• After the projector network has been switched to [USER], manually release the
proxy settings of the WebBrowser used.
Using WebBrowser
Projector settings
WEB CONTROL
ON:This enables control on the WebBrowser.
OFF:This disables control on the WebBrowser.
Select [WEB CONTROL] on the network menu (See page 28).1
Select [ON] or [OFF] with the [ ] buttons.2
Note:
The WebBrowser password is not set at the factory, and should be set on the
WebBrowser. In addition, if you forget the password, select [DEFAULT] at the
network menu and initialize the network settings. (See page 37) 
Connect the projector and computer before taking the steps below. 
(See page 12 or page 32)
1
LB20NT
OFF
ON NETWORK
NAME CHANGE 
INPUT PASSWD
AMEND PASSWD
WEB CONTROL
STATUS
DEFAULT
   SELECTNETWORK
RETRN
ENTER
Click [ ] on the launcher (See page 15).1
Change the projector settings by WebBrowser.
Make the SSID, communication mode, IP address, subnet mask and WEP
settings, and then quit WebBrowser.2 
						

							39
Using WebBrowser(cont.)
Select [Security] and set the security level to [Default Level],
or select [Custom Level] and check the [Enable] checkbox
under [Active scripting].Right-click the [Internet Explorer]
icon.
Open the Properties window.
1
Open [Connections] →[LAN
Settings]. If [Use automatic
configuration script] has been
checked, remove the check, and
click [OK].
The setting window closes.
2
Note:
Under [Advanced] you must set the IP address of the projector to be connected for
not using the proxy server as an exception. However, this setting will be
automatically established if network numbers 1 to 4 are used by Internet Explorer.
Note:
When using Netscape, select [Edit] →
[Preferences] →
[Advanced] and enable
JavaScript.
When a proxy server is already being used
Enabling JavaScript 
						

							40
Using WebBrowser(cont.)
Starting up WebBrowser
Click [ ] on the launcher(see page 15)or start up the WebBrowser, and enter
the IP address set by the projector.
(The example below describes the case when using Microsoft Internet Explorer.)
WebBrowser starts up.
Top window
Notes:
• If you forget the password, set a new password on the projector side. (The former
password is protected by security, and cannot be viewed even by the projector.)
• The top window may not appear depending on the WebBrowser. In this case start
up WebBrowser again, or press the [Ctrl] + [R] keys.
• Connection cannot be made while the WebBrowser is set to dial-up network.
Cancel the dial-up network setting.
• It may take some moments for WebBrowser to start up.
Set to not use a proxy server. (When using a
proxy server, refer to page 39.)
Enter the password when a password is set. Select English or Japanese.