Panasonic Network Function Edition PT-LB20NTU / PT-LB30NTU Instruction Manual

21
One shot mode
In this mode, a snapshot of the current computer screen is transmitted to the projector.
Check the status indication on the launcher to make
sure that transmission is possible (check that the
green lamp is lighted).1
Click [ ] on the launcher.2
Using Wireless Manager ME 2.0 (cont.)
Quitting multi live mode
Click [ ] on the launcher again.
Check the status indication on the launcher to make
sure that transmission is possible (check that the
green lamp is lighted).1
Click [ ] on the...

22
Using Wireless Manager ME 2.0 (cont.)
Moving picture transmission 
Displaying the moving picture transmission window
Notes:
•Select the standard style before operating. (See page 18)
However, this mode cannot be used while any other computer connected over the
wireless network to the projector in use is transmitting a snapshot. 
•The allowed formats are those accepted by Windows Media Player, including asf,
wmv, avi and mpeg.
•
Some frames may be lost or the audio may be disrupted in some computing...

23
Using Wireless Manager ME 2.0 (cont.)
Notes:
•Select the standard style before operating. (See page 18)
However, this mode cannot be used while any other computer connected over the
wireless network to the projector in use is transmitting a snapshot. 
•The greater the number of projectors, the slower the transmission.
•Up to 8 projectors can be connected.
•Multiple source projection mode operations can be performed only in the live
mode and one-shot mode. However, the sound cannot be output in these...

24
Notes:
Selecting [High Definition] imposes the following limits on operation.
•In moving picture transmission, operations are performed in the normal mode.
•When a movie is playing in the live mode, it may not be displayed smoothly.
Click [ ] on the
launcher.
The window shown to the right
appears.
Pointer mode
You can change the shape of the pointer appearing on the projection screen in live
mode to one that can be used for presentation purposes [ ].
Click [ ] on the launcher.
Quitting pointer mode...

25
Live mode settings
You can set the computer operation in live mode and multi live mode.
[Remove image when shutting down Live Mode]:
Check this box to clear the projection screen from the projector when live mode
ends. Normally the image when live mode ends remains projected.
[Disable Screen Saver]:
This disables the computer screen saver function while Wireless Manager ME 2.0
is operating. Check this box to disable screen saver operation during live mode.
[Display sender’s name in Multi Live Mode]:...

26
Using Wireless Manager ME 2.0 (cont.)
Launcher size and automatic setting of destinations
You can set the launcher size and can perform automatic settings for a newly
connected projector.
Click [Other].
Launcher size setting
Click the [Large button] or the [Small button].
Automatic connection setting
•If the [Make an automatic connection] box is checked and a projector is registered as
a destination for automatic connection when Wireless Manager ME 2.0 is started,
connection is performed...

27
Adding and deleting connections
Click [ADD] and enter the IP address
(including its periods) of the connection
to be added, and then click [REGISTER].
The newly registered connection is added to the
connection list in the window shown in step 1.
2
Click [Designate] at the
connection select window.
The window shown to the right appears.
1
Using Wireless Manager ME 2.0 (cont.)
When [Network] is set to [USER] at the connection select window, connections can be
added and deleted by the following...

28
Displaying the Network Menu
Perform the procedure below to display the network menu required when changing the
initial settings.
Press the [MENU] button on the projector.
The main menu appears.1
Select [NETWORK] with the [ ] buttons, then press
the [ENTER] button.
The network menu appears.
2
NETWORK
1
LB20NT
OFF
ON NETWORK
NAME CHANGE 
INPUT PASSWD
AMEND PASSWD
WEB CONTROL
STATUS
DEFAULT
   SELECTRETRN
ENTER
MENU
KEYSTONE
PICTURE
POSITION
INDEX WINDOW
SHUTTER
VOLUME
LANGUAGE
OPTION
SECURITY
NETWORK...

29
Other Applications (Changing the Initial Settings)
When making a wireless connection between a computer and the projector with
settings other than the default settings, make the following settings.
Changing the network number
Projector operations
Select [NETWORK] at the network menu and press the
[ENTER] button.
1
Select the number to be connected
with the [ ] buttons and press
the [ENTER] button.2
NETWORK
USER
ADJRETRN
ENTER
Computer operations
Perform steps 1 to 2 on page 12, then perform the...

30
Other Applications (Changing the Initial Settings)(cont.)
Changing the projector name
You can change the projector name on the network.
Select [NAME CHANGE] at the
network menu and press the
[ENTER] button.1
Enter the projector name using
the [ ] buttons.2
After entering the projector name,
select [OK] and press the [ENTER]
button.
To cancel the change, select [Cancel] and press
the [ENTER] button.
3
1
LB20NT
ON
ON NETWORK
NAME CHANGE 
INPUT PASSWD
AMEND PASSWD
WEB CONTROL 
STATUS
DEFAULT...