Panasonic Network Function Edition PT-LB20NTU / PT-LB30NTU Instruction Manual

11
Simple Wireless Connection(Using the Initial Settings)
When making a wireless connection between the projector and the computer using the
default settings, if the projector is in the ON condition, and the computer has built-in
wireless LAN or has a wireless card installed (with the driver installed and running
properly), the necessary settings will be made automatically when Wireless Manager
ME 2.0 is started.
However, note that Wireless Manager ME 2.0 must be installed.
For details on changing the...

12
Computer operations
Turn on the computer.1
Select [Start] →
[Programs] →
[Panasonic Wireless
Display] →
[Wireless Manager mobile edition 2.0].
Wireless Manager ME 2.0 starts up, and the connection select window shown
below appears.
2
Select the connection and click [OK].
The launcher shown below appears and the connection with the projector is
established.3
Simple Wireless Connection (Using the Initial Settings)(cont.)
Notes:
•The initial network number for both the projector and the computer is “1”....

13
Canceling the connection with the projector
Click [ ] on the launcher.
The following window appears.
1
Click [Yes].
The computer returns to the original network settings when the connection is
ended.
However, note that some time may be needed to return to the original network
settings.2
Simple Wireless Connection (Using the Initial Settings)(cont.) 

14
Using Wireless Manager ME 2.0
Description of the connection select window
When the network number to be
connected differs, select the
network number to be connected.
The network settings change
according to this selection.
This network number is stored in
the computer, so connection is
performed with the current
number the next time Wireless
Manager ME 2.0 is started up.
This indicates the number of people connected to this
projector.
This indicates the status of this projector.
This appears when...

15
Description of the launcher and menu
(Green, lighted): Transmission possible
(Blue, blinking):Own computer currently transmitting
(
in the live mode or moving picture transmission mode)
(Yellow, lighted):Other user currently transmitting
(Red, lighted):  Communication impossible
(Black, lighted):  When the projector has not been selected
Status indication
When connected to one projector
(Green, lighted):All transmission possible
(Blue, blinking):  Currently transmitting
(Yellow,...

16
Using Wireless Manager ME 2.0 (cont.)
Full launcher
Menu
Live Mode:Displays the computer screen over the entire projection screen.
(See page 17)
Multi Live Mode:Offers a choice of three styles: the standard style (for displaying
the images on one of the four windows into which the screen
has been divided), the 4-screen index style (for displaying 4
indexed images), and the 16-screen index style (for displaying
the images on one of the 16 windows into which the screen has
been divided).
In 16-screen...

17
Using Wireless Manager ME 2.0 (cont.)
Check the status indication on the launcher to make
sure that transmission is possible (check that the
green lamp is lighted).
1
Click [ ] on the launcher.
The current computer screen is transmitted to the selected projector. In the live
mode the projector is occupied by a single computer, so operations from other
computers are not possible.
2
Quitting live mode
Click [ ] on the launcher.
Live mode
Notes:
•For presentations in live mode, the [ ] buttons on the...

18
Using Wireless Manager ME 2.0 (cont.)
Multi live mode
Multi live mode allows simultaneous projection of the contents of the monitors of 4
computers (Standard style, 4-screen index style) and of 16 computers (16-screen
index style) onto a single screen.
Switching from one style to another
Either press the [INDEX WINDOW] button on the remote control or select [INDEX
WINDOW] on the projectors main menu (See page 28) and press the [ENTER] button.
4-screen index style
16-screen index style
Notes:
•The...

19
Using Wireless Manager ME 2.0 (cont.)
Check the status indication on the launcher to make
sure that transmission is possible (check that the
green lamp is lighted).
1
Click [ ] on the launcher.2
Select and click the projection position.
The computer image is transmitted to the selected quarter of the projection screen.3
Switching to a different position
Select and click a different projection position in step 3
above.
Quitting multi live mode
Select and click the checked position in step 3 above....

20
Quitting multi live mode
Select and click the checked position in step 3 on the previous page.
Note:
In the 4-screen index style mode, the green status display lamp remains lighted.
Other computers can send images only to the windows which are not being used.
Using Wireless Manager ME 2.0 (cont.)
Note:
While an enlarged image is displayed, the [ ] buttons on the remote control will
function in the same way as the computer’s Page Up and Page Down keys. This
means that if you run a computer application...