Home
>
Panasonic
>
Recording Equipment
>
Panasonic Network Disk Recorder Wjnd300a Setup Instructions
Panasonic Network Disk Recorder Wjnd300a Setup Instructions
Have a look at the manual Panasonic Network Disk Recorder Wjnd300a Setup Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 92
92
Initialize the Hard Disk Drive [Format]
Initialize (format) the built-in hard disk drive and the hard disk drives of the connected optional extension unit.
It is possible to select and initialize a hard disk drive independently.
When using in the RAID 5 mode, all the unit will be initialized.
It is necessary to initialize the hard disk drive in the following cases.
•When the built-in hard disk of the unit is replaced or when the hard disk drive is added newly
•When using the connected optional...](http://img.usermanuals.tech/thumb/58/69425/w64_wjnd300a_setup_en_om_d-91.png "Page 92
92
Initialize the Hard Disk Drive [Format]
Initialize (format) the built-in hard disk drive and the hard disk drives of the connected optional extension unit.
It is possible to select and initialize a hard disk drive independently.
When using in the RAID 5 mode, all the unit will be initialized.
It is necessary to initialize the hard disk drive in the following cases.
•When the built-in hard disk of the unit is replaced or when the hard disk drive is added newly
•When using the connected optional...")
![Page 94
94
Initialize the pre-recording area [Pre Recording areas Format]
Initialize the pre-recording area as follow.
Important:
When exiting from the HDD DISK MENU, be sure to click the [Main] button. Do not click the close button
( ) at the top right of the window, otherwise it may cause malfunction.
Screenshot 1
Click Pre Recording areas Format on the top menu
(Connection Information) of the HDD DISK MENU to
display the Pre Recording areas Format window.
Step 1
Select the desired hard disk drive to be...](http://img.usermanuals.tech/thumb/58/69425/w64_wjnd300a_setup_en_om_d-93.png "Page 94
94
Initialize the pre-recording area [Pre Recording areas Format]
Initialize the pre-recording area as follow.
Important:
When exiting from the HDD DISK MENU, be sure to click the [Main] button. Do not click the close button
( ) at the top right of the window, otherwise it may cause malfunction.
Screenshot 1
Click Pre Recording areas Format on the top menu
(Connection Information) of the HDD DISK MENU to
display the Pre Recording areas Format window.
Step 1
Select the desired hard disk drive to be...")
![Page 95
95
Screenshot 4
When completing the initialization, the result will be dis-
played.
Step 6
When the [OK] button is clicked, the Format window
will be displayed.
Step 7
Click the [Main] button to return to the operation win-
dow. The unit will restart when this button is clicked.
Main
Screenshot 3
The deletion confirmation window will be displayed.
Step 5
Click the [OK] button.• When the following setting for the camera channels
to which pre-event recording area is assigned are
configured using the...](http://img.usermanuals.tech/thumb/58/69425/w64_wjnd300a_setup_en_om_d-94.png "Page 95
95
Screenshot 4
When completing the initialization, the result will be dis-
played.
Step 6
When the [OK] button is clicked, the Format window
will be displayed.
Step 7
Click the [Main] button to return to the operation win-
dow. The unit will restart when this button is clicked.
Main
Screenshot 3
The deletion confirmation window will be displayed.
Step 5
Click the [OK] button.• When the following setting for the camera channels
to which pre-event recording area is assigned are
configured using the...")
![Page 96
96
Remove the Hard Disk Drive from the System Logically
[Remove]
It is possible to remove the hard disk drive logically (unmount) without uninstalling (detaching) the hard disk drive
physically. It is recommended to remove the hard disk logically when the hard disk of the unit or an extension unit is
having trouble and it is necessary to remove it temporarily but not to stop operation.
Do the following to remove the hard disk drive logically.
Important:
When exiting from the HDD DISK MENU, be sure to...](http://img.usermanuals.tech/thumb/58/69425/w64_wjnd300a_setup_en_om_d-95.png "Page 96
96
Remove the Hard Disk Drive from the System Logically
[Remove]
It is possible to remove the hard disk drive logically (unmount) without uninstalling (detaching) the hard disk drive
physically. It is recommended to remove the hard disk logically when the hard disk of the unit or an extension unit is
having trouble and it is necessary to remove it temporarily but not to stop operation.
Do the following to remove the hard disk drive logically.
Important:
When exiting from the HDD DISK MENU, be sure to...")
![Page 98
98
– •This may occur due to the display adapter and driver
combination.
aWhen this occurred, update the driver of the display
adapter to the latest version first.
If updating the driver does not solve the problem,
adjust the hardware acceleration as follows.
1. After closing all browser windows, right-click on
the desktop and select Properties from the dis-
played pop-up menu.
2. Select Settings from Display Properties, and
then click the [Advanced] button.
3. Click the [Troubleshoot] tab and disable...](http://img.usermanuals.tech/thumb/58/69425/w64_wjnd300a_setup_en_om_d-97.png "Page 98
98
– •This may occur due to the display adapter and driver
combination.
aWhen this occurred, update the driver of the display
adapter to the latest version first.
If updating the driver does not solve the problem,
adjust the hardware acceleration as follows.
1. After closing all browser windows, right-click on
the desktop and select Properties from the dis-
played pop-up menu.
2. Select Settings from Display Properties, and
then click the [Advanced] button.
3. Click the [Troubleshoot] tab and disable...")
![Page 102
Information on Disposal for Users of Waste Electrical & Electronic Equip\
ment (private households)
This symbol on the products and/or accompanying documents means that use\
d electrical and electronic products should not be
mixed with general household waste.
For proper treatment, recovery and recycling, please take these products\
to designated collection points, where they will be
accepted on a free of charge basis. Alternatively, in some countries you\
may be able to return your products to your...](http://img.usermanuals.tech/thumb/58/69425/w64_wjnd300a_setup_en_om_d-101.png "Page 102
Information on Disposal for Users of Waste Electrical & Electronic Equip\
ment (private households)
This symbol on the products and/or accompanying documents means that use\
d electrical and electronic products should not be
mixed with general household waste.
For proper treatment, recovery and recycling, please take these products\
to designated collection points, where they will be
accepted on a free of charge basis. Alternatively, in some countries you\
may be able to return your products to your...")
101 When using a PC on which Windows XP Service Pack2 (SP2) is installed The following may occur during operation when using a PC on which Windows XP Service Pack2 (SP2) is installed. Follow the instructions below when the following occurred. By performing the following solutions, other applications and the security level may not be affected. The Information Bar expressed in the following symptom and solutions will be displayed just below the address bar only when there is information to communicate. •Click the information bar and select Always Allow Pop-ups from This Site. The dialog window saying Allow pop-ups from this site? will be displayed. Click the Yes button.The following message is displayed on the information bar. Pop-up blocked. To see this pop-up or additional options, click here… – Reference pages SolutionsSymptom Information Bar The following message is displayed on the information bar. This site might require the following Active X con- trol: WebVideo.cab from Matsushita Electric Industrial Co., Ltd. Click here to install... – – Unnecessary status bar or scroll bar is displayed on the pop-up window. •Click the information bar and select Install Active X Control. The Security Warning window will be displayed. Click the Install button on the displayed Security Warning window. •Click Internet Options on the Tools menu of Internet Explorer, and then click the Security tab. Then, click the Custom Level... button to open the Security Setting window. Under Miscellaneous, select Enable for Allow script-initiated windows without size or position constraints. Click the OK button. The Warning window will be displayed. Click the Yes button.
Information on Disposal for Users of Waste Electrical & Electronic Equip\ ment (private households) This symbol on the products and/or accompanying documents means that use\ d electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take these products\ to designated collection points, where they will be accepted on a free of charge basis. Alternatively, in some countries you\ may be able to return your products to your local retailer upon the purchase of an equivalent new product. Disposing of this product correctly will help to save valuable resources\ and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriat\ e waste handling. Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in acc\ ordance with national legislation. For business users in the European Union If you wish to discard electrical and electronic equipment, please conta\ ct your dealer or supplier for further information. Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authoriti\ es or dealer and ask for the correct method of disposal . For U.S., Canadian and Puerto Rican fields: Panasonic System Solutions Company, Unit Company of Panasonic Corporation of North America Security Systems www.panasonic.com/security For customer support, call 1.877.733.3689 Executive Office: Three Panasonic Way 2H-2, Secaucus, New Jersey 07094 Zone Office Eastern: Three Panasonic Way, Secaucus, New Jersey 07094 Central: 1707 N. Randal Road, Elgin, IL 60123 Southern: 1225 Northbrook Parkway, Suwanee, GA 30024 Western: 6550 Katella Ave., Cypress, CA 90630 Panasonic Canada Inc.5770 Ambler Drive,Mississauga, Ontario, L4W 2T3 Canada (905)624-5010 http://www.panasonic.ca Panasonic Sales Company Division of Panasonic Puerto Rico Inc. San Gabriel Industrial Park 65th Infantry Ave. KM. 9.5 Carolina P.R. 00985(809)750-4300 © 2006 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. N1106-1047 V8QB6518BN Printed in Japan For European and other fields: Matsushita Electric Industrial Co., Ltd. Osaka, Japan http://panasonic.net