Home > Panasonic > Security Camera > Panasonic Network Camera Wvsf448e Installation Guide

Panasonic Network Camera Wvsf448e Installation Guide

Here you can view all the pages of manual Panasonic Network Camera Wvsf448e Installation Guide. The Panasonic manuals for Security Camera are available online for free. You can easily download all the documents as PDF.

Page 31

31
Configure the network settings
Configuring the camera so that it can be accessed from a PC
The following are descriptions for when the camera with default settings is configured. If you 
are using firewall software on your PC, the Setup Program may not be able to find any 
cameras on your network. Configure the setting of the camera after temporarily invalidating 
the firewall software. Contact the network administrator or your Internet service provider for 
information about configuring the settings...

Page 32

32
c  Select	the	camera	you	want	to	configure,	and	click	[Access	Camera].
Note: 
	•		 When cameras are displayed in [Panasonic IP Setting] screen, click the camera with same 
MAC	address	as	the	MAC	address	printed	on	the	camera	that	you	want	to	configure.
v  If	the	installation	screen	of	the	viewer	software	“Network	Camera	View	4S”	is	displayed,	follow	
the instructions of the wizard to start the installation. (The viewer software is installed from the 
camera.)
	 •	 The	“Live”	page	will	be	displayed....

Page 33

33
Troubleshooting
Before asking for repairs, check the symptoms with the following table. 
Contact your dealer if a problem cannot be solved even after checking and trying the solution in th\
e 
table or a problem is not described below. 
SymptomCause/solutionReference 
pages
Power is not turned on.  When using DC power supply
	•	 Is	12	V	DC	power	supply	connected	to	the	
power supply terminal?
   →  Check whether the connection is appropri-
ately established. 
	•	 Is	the	AC	adaptor	in	use	compliant...

Page 34

34
Specifications
• Basic
Power source:12 V DC, PoE (IEEE802.3af compliant)
Power consumption: 12 V DC*: 610 mA/ 7.3 W
PoE 48 V: 140 mA/ 6.7 W (Class 0 devices)
* 
ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY or 
LIMITED POWER SOURCE.
Ambient operating temperature: –10 °C to +50 °C {14 °F to 122 °F}
Ambient operating humidity: Less than 90 % (no condensation)
Shock resistance: Compliant with 20 J (IEC 60068-2-75)/IK10 (IEC 62262)
External I/O terminals: ALARM IN 1/PRIVACY ACTION IN, ALARM IN 2/ ALARM OUT,...

Page 35

35
ELC
(Maximum exposure time):•	With	Super	Dynamic	On
ELC (1/30 s)
•	With	Super	Dynamic	Off ELC (1/30 s), ELC (3/100 s), ELC (3/120 s),
ELC (2/100 s), ELC (2/120 s), ELC (1/100 s), ELC (1/120 s),
ELC (1/250 s), ELC (1/500 s), ELC (1/1000 s), ELC (1/2000 s),
ELC (1/4000 s), ELC (1/10000 s)
Auto slow shutter: Off (1/30 s), max. 2/30 s, max. 4/30 s, max. 6/30 s, 
max. 10/30 s, max. 16/30 s
Day & Night (electrical): Off/ Auto
White balance: ATW1/ ATW2/ AWC
Digital noise reduction: High/Low
Number of the...

Page 36

36
• NetworkNetwork:10BASE-T/100BASE-TX, RJ-45 connector
Resolution: 2M	Panorama	[16:9]/	2M	Double	Panorama	[16:9]:
H.264(1)
H.264(2)
JPEG1920x1080/640x360/320x180 max.30 fps
640x360/320x180 max.30 fps
1920x1080/640x360/320x180 max.30 fps
1M	Panorama	[16:9]/	1M	Double	Panorama	[16:9]:
H.264(1)
H.264(2)
JPEG 1280x720/640x360/320x180 max.30 fps
640x360/320x180 max.30 fps
1280x720/640x360/320x180 max.30 fps
1.3M	Fisheye	[4:3]/	1.3M	Quad	PTZ	[4:3]/	 
1.3M	Single	PTZ	[4:3]:
H.264(1)
H.264(2)
JPEG...

Page 37

37
Protocol:IPv6:  TCP/IP, UDP/IP, HTTP, HTTPS, RTP, FTP, SMTP, DNS, 
NTP, SNMP, DHCPv6, MLD, ICMP, ARP
IPv4:   TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP, 
FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP, UPnP, IGMP, 
ICMP, ARP
OS
*2 *3: Microsoft Windows 8  
Microsoft Windows 7 
Microsoft Windows Vista 
Microsoft Windows XP SP3
Browser: Windows Internet Explorer 10.0 (32-bit)  
Windows Internet Explorer 9.0 (32-bit) 
Windows Internet Explorer 8.0 (32-bit) 
Windows Internet Explorer 7.0 (32-bit)
Maximum...

Page 38

38
Standard accessories
Optional accessories
Installation Guide (this document) ............................................... 1 pc.
Warranty card (P model only)  ..................................................... 1 pc.
CD-ROM*
1  ........................................................................\
........ 1 pc.
Code label*2  ........................................................................\
...... 1 pc.
The following parts are used during installation procedures. 
Camera attachment...

Page 39


				            

Page 40

Information for Users on Collection and Disposal of Old Equipment and us\
ed 
Batteries
These symbols on the products, packaging, and/or accompanying documents mean that 
used electrical and electronic products and batteries should not be mixed with general 
household waste.
For proper treatment, recovery and recycling of old products and used batteries, please 
take them to applicable collection points, in accordance with your national legislation and 
the Directives 2002/96/EC and 2006/66/EC.
By...
Start reading Panasonic Network Camera Wvsf448e Installation Guide

Related Manuals for Panasonic Network Camera Wvsf448e Installation Guide

All Panasonic manuals