Panasonic Network Camera Wv Sw396a Installation Guide

Configure the network settings of the camera using the Panasonic IP setting 
software
It	 is	 possible	 to	 perform	 the	 network	 settings	 of	 the	 camera	 using	 the	 IP	 setup	 software	 on	 the	 provided	 CD-ROM.	 When	using	multiple	cameras,	it	is	necessary	to	configure	the	network	settings	of	each	camera	independently.	
If	the	Panasonic	IP	setting	software	does	not	work,	configure	the	network	settings	of	the	camera	and	the	PC	individually	on	
the	 "Network"	 page	 of	 the	 setup	 menu....

c	 Complete	each	network	setup	item	and	click	the	[Save]	button.
Note:
	 •	 When	selecting	"DHCP"	or	"AutoIP",	it	is	possible	to	set	"DNS"	to	"Auto".	
	 •	 By	unchecking	the	"Wait	for	camera	restarting."	checkbox,	multiple	camer -
as	can	be	continuously	configured.
Important: 
	 •	 It	may	take	for	around	2	minutes	to	complete	to	upload	the	settings	to	the	camera	after	clicking	the	[Save]	button.	The	 settings	 may	 be	 invalidated	 when	 the	 LAN	 cable	 is...

Troubleshooting
Before asking for repairs, check the symptoms with the following table. 
Contact your dealer if a problem cannot be solved even after checking and trying the solution in th\
e table or a problem is 
not described below. 
SymptomCause/solutionReference 
pages
Power is not turned on.  When using a PoE+ device for power supply
	•	 Are	the	PoE+	(IEEE802.3at	compliant)	device	and	the	RJ-45	
female connector (cable integrated type) connected using a LAN 
cable (category 5e or better, STP*)?...

SymptomCause/solutionReference 
pages
Live indicator keeps on 
blinking orange approx. in 2 
seconds intervals.  	•	 UPnP
TM error has occurred since the power is not supplied to the 
router. 
   Turn on the power of the router. Wait until the connections are 
established.  −
	•	 An	error	has	occurred	during	the	port	update	by	the	UPnP	func- tion. 
   If the router in use does not support the UPnP function, perform 
the port forwarding setting for the router. In addition, deactivate the 
setting of auto...

About the live indicator
The live indicator will light or blink as follows depending on the camer\
a status. 
Operation statusIndicator status
When the power is turned on Before the network  connection is establishedBlinks orange
When the network 
connection is established Blinks orange → Blinks green → Lights green
During the standby or connection (Cable is not connected.) Lights orange
During the standby or connection (Cable is connected.) Lights green
During the upgrade process Blinks orange
During...

Specifications
• Basic
Power source: 24 V AC or PoE+ (IEEE802.3at compliant)
Power consumption: SW396 24 V AC*: 50 Hz/60 Hz: 43 W/1.8 A, PoE+: Approx. 25 W/460 mA (Class 4 device)
  SW395 24 V AC*: 50 Hz/60 Hz: 43 W/1.8 A, PoE+: Approx. 24 W/440 mA (Class 4 device)
   *  FOR UL LISTED MODEL(S), ONLY CONNECT 24 V AC CLASS 2 POWER SUPPLY.
Ambient operating temperature: SW396 –50 °C to +55 °C {–58 °F to +131 °F} (24 V AC)*1*2
     –30 °C to +55 °C {–22 °F to +131 °F} (PoE+)
  SW395 –40 °C to +50 °C {–40 °F...

Adaptive black stretch: On/Off
Back light compensation (BLC):  On/Off
Light control mode setting:  Indoor scene (50 Hz)/ Indoor scene (60 Hz)/ Outdoor scene/ Fix shutter
Shutter speed:  1/30, 3/100, 3/120, 2/100, 2/120, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/\
2000, 
1/4000, 1/10000
Auto slow shutter:  Off (1/30 s), max. 2/30 s, max. 4/30 s, max. 6/30 s, max. 10/30 s, max. \
16/30 s
Color/BW:  On/ Off/ AUTO1/ AUTO2/ AUTO3
White balance:  ATW1/ ATW2/ AWC
Digital noise reduction:  High/Low
Image stabilizer:...

• Network
Network: 10BASE-T/100BASE-TX, RJ45 connector
Resolution:  Aspect ratio: 4:3
     H.264:  1280x960/ 800x600/ VGA(640x480)/ QVGA(320x240),  
max. 30 fps
     MPEG-4:  VGA(640x480)/QVGA(320x240), max. 30 fps
     JPEG (MJPEG):  1280x960/ 800x600/ VGA(640x480)/ QVGA(320x240),  
max. 30 fps
   Aspect ratio: 16:9
     H.264:  1280x720/ 640x360/ 320x180, max. 30 fps
     JPEG (MJPEG): 1280x720/ 640x360/ 320x180, max. 30 fps
   * MPEG-4 is not supported. 
Image compression method*
1 *2:  H.264/MPEG-4...

Standard accessories
Installation Guide (this document) ........................................................................\
................................................1 pc.
Warranty card (P model only) ........................................................................\
.......................................................1 pc.
CD-ROM*
1 ........................................................................\...

For U.S. and Canada:
Panasonic System Communications 
Company of North America, 
Unit of Panasonic Corporation of North America
www.panasonic.com/business/
For customer support, call 1.800.528.6747
Three Panasonic Way, Secaucus, New Jersey 07094 U.S.A.
Panasonic Canada Inc.5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada 
(905)624-5010
www.panasonic.ca
© Panasonic System Networks Co., Ltd. 2011Cs1011-2012       PGQX1058YB       Printed in China
For Europe and other countries:
Panasonic...