Panasonic Network Camera Wv Sw352 Wv Sw355 Installation Guide

							41
Install the software
Before installing the software, refer to the readme file on the provided CD-ROM first.
Software included on the provided CD-ROM
	 •	 Panasonic	IP	setting	software
   Configure the network settings of the camera. Refer to the following for further\
 information. 
	 •	 Viewer	Software	"Network	Camera	View	4S"
    It is necessary to install the viewer software "Network Camera View 4S" to display images on a 
PC. Install the viewer software by double-clicking the "nwcv4Ssetup.exe" icon on the provided 
CD-ROM. 
Configure the network settings of the camera using the 
Panasonic IP setting software
It is possible to perform the network settings of the camera using the IP setup software on the pro-
vided CD-ROM. 
When  using  multiple  cameras,  it  is  necessary  to  configure  the  network  settings  of  each  camera 
independently. 
If  the  Panasonic  IP  setting  software  does  not  work,  configure  the  network  settings  of  the  camera 
and  the  PC  individually  on  the  "Network"  page  of  the  setup  menu.  Refer  to  the  Operating 
Instructions (PDF) for further information.
Important: 
	 •	 When	 using	Microsoft	 Windows	 7	or	 Microsoft	 Windows	 Vista,	the	"Windows	 Security	Alert"	
window  may  be  displayed  when  starting  the  IP  setup  software.  In  this  case,  disable  "User 
Account Control" from the control panel.
	 •	 For	 the	security	 enhancement,	 the	MAC	 address/IP	 address	of	the	 camera	 to	be	 configured	 will	
not be displayed when around 20 minutes have passed after turning on the power of the cam-
era. (When the effective period is set to "20min" in the IP setup)
	 •	 Panasonic	IP	setting	software	is	inoperable	in	other	subnets	via	the	same	router.
	 •	 This	 camera	cannot	be	displayed	 or	set	 with	 an	older	 version	 of	the	 IP	setup	 software	 (version	
2.xx).
Configure the network settings 
						

							42
z   Start  the  Panasonic  IP  setting  software  by  double-clicking  the  "EasyIpSetup.exe"  icon  on  the 
provided CD-ROM.
    The License Agreement will be displayed. Read the Agreement and choose "I accept the term 
in the license agreement", and click "OK".
x   Click the [Network Settings] button after select-
ing the MAC address/IP address of the camera 
to be configured. 
Note:
	 •	 When	 using	a	DHCP	 server,	 the	IP	address	 assigned	 to	the	 camera	 can	be	displayed	 by	click-
ing the [Search] button of the IP setting software. 
	 •	 When	 a	duplicate	 IP	address	 is	used,	 the	corresponding	 camera	number	 will	be	displayed	
shaded. 
	 •	 When	 the	[Access	 Camera]	 button	is	clicked,	 live	images	 of	the	 selected	 camera	will	be	dis-
played.
	 •	 It	 is	possible	 to	change	 the	"Camera	 list"	display	 between	 IPv4	addresses	 and	IPv6	 addresses	
in accordance with the protocol in use.
c  Complete  each  network  setup  item  and  click 
the [Save] button.
Note:
	 •	 When	 selecting	"DHCP"	or	"AutoIP",	 it	is	 possi-
ble to set "DNS" to "Auto". 
Important: 
	 •	 It	 may	take	 for	around	 2	minutes	 to	complete	 to	upload	 the	settings	 to	the	 camera	 after	clicking	
the  [Save]  button.  The  settings  may  be  invalidated  when  the  12  V  DC  power  supply  is  cut  or 
when  the  AC  adaptor  or  the  LAN  cable  is  disconnected  before  completing  the  upload.  In  this 
case, perform the settings again.
	 •	 When	using	a	firewall	(including	software),	allow	access	to	all	UDP	ports. 
						

							43
Before asking for repairs, check the symptoms with the following table. 
Contact your dealer if a problem cannot be solved even after checking and trying the solution in the 
table or a problem is not described below. 
SymptomCause/solutionReference 
pages
Power is not turned on.  When using DC power supply
	 •	 Is	DC	12	V	power	supply	connected	to	the	2P	
power supply cable?
  → Check whether the connection is appro-
priately established.
	 •	 Is	 the	AC	adaptor	 in	use	 compliant	 with	the	
Specifications?
  → Check  the  Specifications  regarding  AC 
adaptor. 
When using a PoE device for power supply
	 •	 Are	the	PoE	device	and	the	network	cable	of	 the camera connected using a LAN cable?
  → Check whether the connection is appro-
priately established.
	 •	 Depending	on	the	PoE	device,	the	power	sup- ply will stop when the demanded power 
exceeds its total power limit for all PoE ports. 
  → Refer to the operating instructions of the 
PoE device in use. 26
Troubleshooting 
						

							44
•	Basic
Power source: 12 V DC, PoE (IEEE802.3af compliant)
Power consumption:  12 V DC*: 300 mA, PoE 48 V: 80 mA (Class 0 device)
   (With heater):  12 V DC*: 1.1 A, PoE 48 V: 240 mA (Class 0 device)
    *  FOR UL LISTED MODEL(S), ONLY CONNECT 12 V DC 
CLASS 2 POWER SUPPLY.
Ambient operating temperature:  –10 °C to +50 °C {14 °F to 122 °F}
   (With heater):  –30 °C to +50 °C {–22 °F to 122 °F}
Ambient operating humidity:  Less than 90 % (no condensation)
Waterproof:  Camera: IP66 (IEC60529)
    *  Only when installation work specified in this book is properly 
performed and appropriate waterproof treatment is performed 
Shock resistance:   Compliant with 50 J IEC 60068-2-75/IEC 62262 IK10
Monitor output (for adjusting the 
    angular field of view):  VBS: 1.0 V [p-p]/75 Ω, composite signal, RCA jack
EXT I/O terminal cable:  ALARM IN, DAY/NIGHT IN, ALARM OUT, AUX OUT (x1 for each)
Microphone/line input cable:  ø3.5 mm monaural mini jack
    Input impedance: Approx. 2 kΩ
  For microphone input:  Applicable microphone: Plug-in power type
    Supply voltage: 2.5 V ±0.5 V
  For line input:  Input level: Approx. –10 dBV
Audio output cable:  ø3.5 mm stereo mini jack (monaural output)
    Output impedance: Approx. 600 Ω
    Line level
Dimensions:  ø164 mm x 146 (H) mm x 191.5 (W) mm  
{ø6-15/32 inches x 5-3/4 inches (H) x 7-17/32 inches (W)}  
(including projection of the base cover fixing screw)
Mass:  Approx. 1.6 kg {3.53 lbs}
Finish:  Main body: Aluminum die cast, light gray
    Dome section: Clear polycarbonate resin
•	Camera
Image sensor:  1/3-type MOS image sensor
Effective pixels:  Approx. 1.3 megapixels
Scanning area:  4.80 mm (H) × 3.60 mm(V) {3/16 inches (H) x 5/32 inches (V)}
Scanning system:  Progressive
Minimum illumination 
SW355 :  Color:    0.3 lx {0.03 footcandle}  
(F1.6, Auto slow shutter: Off (1/30 s), Gain: On(High))
     0.019 lx {0.0019 footcandle}  
  (F1.6, Auto slow shutter: max. 16/30 s, Gain: On(High))*
    BW:   0.05 lx {0.005 footcandle}  
(F1.6, Auto slow shutter: Off (1/30 s), Gain: On(High))
       0.003 lx {0.0003 footcandle}  
(F1.6, Auto slow shutter: max. 16/30 s, Gain: On(High))*
Minimum illumination 
SW352 :  Color:    0.2 lx {0.02 footcandle}  
(F1.6, Auto slow shutter: Off (1/30 s), Gain: On(High))
       0.013 lx {0.0013 footcandle}  
(F1.6, Auto slow shutter: max. 16/30 s, Gain: On(High))*
Specifications 
						

							45
   BW:   0.04 lx {0.004 footcandle}  
(F1.6, Auto slow shutter: Off (1/30 s), Gain: On(High))
       0.002 lx {0.0002 footcandle}  
(F1.6, Auto slow shutter: max. 16/30 s, AGC: High)*
    * Converted value
Super-Dynamic:  On/Off
Dynamic range:  52 dB typ. (Super-Dynamic: On, light control: indoor scene)
Gain (AGC):  On(Low)/ On(Mid)/ On(High)/ Off
Adaptive black stretch:  On/Off
Light control mode setting:  Indoor scene (50 Hz/60 Hz)/ Outdoor scene/ Fix shutter
Shutter speed:  1/30, 3/100, 3/120, 2/100, 2/120, 1/100, 1/120, 1/250, 1/500, 
1/1000, 1/2000, 1/4000, 1/10000 (only at Super-Dynamic Off)
Auto slow shutter:  Off (1/30 s), max. 2/30 s, max. 4/30 s, max. 6/30 s,  
max. 10/30 s, max. 16/30 s
Color/BW:  On/ Off/ AUTO1/ AUTO2
White balance:  ATW1/ ATW2/ AWC
Digital noise reduction:  High/Low
Video analytics
   Face detection:  On/Off (with the XML notification setting)
Privacy zone:  On/Off (up to 2 zones available)
VIQS:   On/Off
Camera title on screen:  Up to 20 characters (alphanumeric characters, marks) 
On/Off
Video motion detection 
   (VMD alarm):  On/Off, 4 areas available
 
•	Lens
Zoom ratio:  3.6x
    Extra zoom: 7.2x (under VGA resolution)
Focal length:  2.8 mm - 10 mm
Maximum aperture ratio:  1:1.6 (WIDE) - 1:3.6 (TELE)
Angular field of view:  Horizontal: 27.7 ° (TELE) - 100.8 ° (WIDE)
    Vertical: 20.8 ° (TELE) - 73.8 ° (WIDE)
Adjusting angle:  Horizontal: 180 ° (clockwise), 160 ° (counterclockwise)
    Vertical: ±75 °
    Image tilt adjustment range: ±100 °
•	Network
Network:  10BASE-T/100BASE-TX, RJ45 connector
Resolution 
SW355 :  Aspect ratio: 4:3
     H.264    1280×960/ VGA (640×480)/  
QVGA (320×240), max. 30 fps
     MPEG-4    VGA (640×480)/ QVGA (320×240),  
max. 30 fps
     JPEG (MJPEG)    1280×960/ VGA (640×480)/  
QVGA (320×240), max. 30 fps
    Aspect ratio: 16:9
     H.264  1280×720/ 640×360/ 320×180, max. 30 fps
     JPEG (MJPEG)  1280×720/ 640×360/ 320×180, max. 30 fps
    * MPEG-4 is not supported. 
Resolution 
SW352 :  Aspect ratio: 4:3
     H.264    800×600/ VGA (640×480)/ QVGA (320×240), 
max. 30 fps 
						

							46
    MPEG-4    VGA (640×480)/ QVGA (320×240),  
max. 30 fps
     JPEG (MJPEG)    800×600/ VGA (640×480)/ QVGA (320×240), 
max. 30 fps
    Aspect ratio: 16:9
     H.264  640×360/ 320×180, max. 30 fps
     JPEG (MJPEG)  640×360/ 320×180, max. 30 fps
    * MPEG-4 is not supported. 
Image compression method*
1 *2:  H.264/MPEG4
     Image quality: Low/ Normal/ Fine
     Transmission type: Unicast/Multicast
     Audio bit rate: 
       Constant bit rate/Best effort: 64 kbps/ 128 kbps/ 256 kbps/ 
384 kbps/ 512 kbps/ 768 kbps/ 1024 kbps/ 1536 kbps/ 
2048 kbps/ 3072 kbps/ 4096 kbps/ *8192 kbps
     * only in H.264 mode 
SW355
     Frame rate:
       1 fps/ 3 fps/ 5 fps/ 7.5 fps/ 10 fps/ 12 fps*/ 15 fps/ 20 fps/ 
30 fps
     * PAL model only
    JPEG (MJPEG)
     Image quality: 
       0 SUPER FINE/ 1 FINE/ 2/ 3/ 4/ 5 NORMAL/ 6/ 7/ 8/  
9 LOW (10 steps: 0-9)
    Transmission type: PULL/PUSH
Transmission interval:  0.1 fps - 30 fps (JPEG frame rate will be restricted when dis-
playing both JPEG and H.264/MPEG-4 images.)
Audio compression method:  G.726 (ADPCM) 32 kbps/16 kbps
    G.711 64 kbps
Bandwidth control:  Unlimited/ 64 kbps/ 128 kbps/ 256 kbps/ 384 kbps/  
512 kbps/ 768 kbps/ 1024 kbps/ 2048 kbps/ 4096 kbps/  
8192 kbps 
SW355
Protocol: IPv6: TCP/IP, UDP/IP, HTTP, HTTPS, RTP, FTP, SMTP, DNS, 
NTP, SNMP, DHCPv6
    IPv4: TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTP, RTP/RTCP, 
FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP, UPnP
OS*
3 *4:  Microsoft Windows 7 Professional (64-bit)
    Microsoft Windows 7 Professional (32-bit)
    Microsoft Windows Vista Business SP1 (32-bit)
    Microsoft Windows XP Professional SP3
Browser:  Windows Internet Explorer 8.0 (32-bit)
    (Microsoft Windows 7 Professional (32-bit/64-bit))
    Windows Internet Explorer 7.0
    (Microsoft Windows Vista Business SP1 (32-bit))
    Microsoft Internet Explorer 6.0 SP3
    (Microsoft Windows XP Professional SP3)
Maximum concurrent 
   access number:  14 (Depends on network conditions)
FTP client:  Alarm image transmission, FTP periodic transmission (When the 
FTP transmission is failed, backup on an optional SDHC/SD 
memory card is available.)
Multi-screen:  Up to 16 camera images can be displayed simultaneously on a 
multi-screen. (Including the camera itself) 
						

							47
Compatible SDHC/
   SD memory card (option): Manufactured by Panasonic
    SDHC memory card: 4 GB, 8 GB, 16 GB, 32 GB
    SD memory card: 256 MB, 512 MB, 1 GB, 2 GB
    (except miniSD card and microSD card)
Cellular phone compatibility:  JPEG image, AUX control (by access level)
  *1  Either H.264 or MPEG-4 is selectable.
  *2  Transmission for 2 streams can be individually set in the same compression method.
  *3  Refer to "Notes on Windows Vista
® / Windows® 7" (PDF) on the provided CD-ROM for further 
information  about  system  requirements  for  a  PC  and  precautions  when  using  Microsoft 
Windows 7 or Microsoft Windows Vista. 
  *4  When using IPv6 for communication, use Microsoft Windows 7 or Microsoft Windows Vista.  
						

							48
Installation Guide (this document) ...................................................... 1 pc.
Warranty card (NTSC model only)  ...................................................... 1 pc.
CD-ROM*
1  ........................................................................\
................ 1 pc.
Code label*2  ........................................................................\
.............. 1 pc.
The following parts are used during installation procedures.
4P alarm cable  ........................................................................\
.......... 1 pc.
Camera attachment  ........................................................................\
... 1 pc.
2P power cable  ........................................................................\
......... 1 pc.
Fixing screws (M4 x 8 mm)  .............................5 pcs. (of them, 1 for spare)
Base cover  ........................................................................\
................ 1 pc.
Mount bracket  ........................................................................\
........... 1 pc.
Bit for tamperproof screw  .................................................................. 1 pc.
Butyl tape  ........................................................................\
.................. 1 pc.
  *1  The  CD-ROM  contains  the  operating  instructions  (PDFs)  and  different  kinds  of  tool  software 
programs. 
  *2  This label may be required for network management. The network administrator shall retain the 
code label. 
Standard accessories 
						

							49
Ceiling mount bracket .................................................. WV-Q169
Smoke Dome Cover  .................................................... WV-CW4S
Heater Unit  .................................................................. WV-SW3H
User License Accessory (For MPEG-4)  ........................ 
BB-HCA5A (NTSC model) 
  BB-HCA5CE (PAL model, Korea*) 
* Required in Korea
User License Accessory (For H.264)  ............................  BB-HCA8A (NTSC model) 
BB-HCA8CE (PAL model, Korea*) 
* Required in Korea
Optional accessories 
						

							50