Panasonic Network Camera Recorder With Viewer Software Important Information Manual

							
Operating Instructions
67
2.5.2 Searching the Recorded Images
Search for recorded images and display them in the Image Timelines Chart.
1.Select [Window]  [Recorded Images] on the menu bar.
2.Enter search criteria and click [Search].
Search criteria
Searched Target Select the folder to search.
To search a folder other than the destination folder, select 
[Select Folder], click [Browse...] and select a folder.
Time Period SettingTo search by time period, select the [Time Period Setting] 
check box and enter a time frame.
Weekly SettingSelect the desired days of the week.
Recording ModeSelect the recording mode.
 Normal recording is images recorded by using  or by 
selecting full time recording as the timer recording method.
 Motion detection recording is images recorded by using  
or by selecting motion detection recording as the timer 
recording method.
 Alarm recording is images recorded by using  or 
selecting alarm/sensor recording as the timer recording 
method.
Recording TriggerSelect the recording trigger (timer or manual).
KeywordSelect this check box to enable keyword search. Enter the 
keyword for the recorded image. 
						

							
Operating Instructions
68
 Days that have images that match the criteria are displayed in boldface on the calendar.
Change the month
Displays the month that contains the most recent images that match the criteria.
The day on which the most recent images were recorded in the 
displayed month is selected.
Note
 Clicking [Return to the default position] se ts the search criteria to their default 
values. To search all recorded images , click [Return to the default position] 
and click [Search].
 When you change search criteria, [Return to the previous search criteria] 
becomes available. To return the criteria to their previous values, click 
[Return to the previous search criteria] and click [Search].
 If you change the month,  images that match the criteria for the new month 
are displayed.
3.On the calendar, click the day that has the images that you want to playback.
 The images that match the criteria for the selected day are displayed in the  image timelines chart for each camera.
 Blocks representing recorded images are displayed in the chart.
Click the day that has the images that you want to playback. 
The images that match the criteria for the selected day are displayed 
for each camera. 
						

							
Operating Instructions
69
2.5.3 Confirm the Recorded Image on the Playback 
Screen
1.Select [Window]  [Recorded Images] on the menu bar.
2.Search for recorded images and display them in the image timelines chart.
3.Select a camera to playback the images on the image timelines chart.
 You can select cameras up to the number of images set in the [Multi-
Playback] page in [Preferences] (see 
page 85). If you select more than this 
number, the following message will be displayed.
4.Set the start and end times for playback by dragging the playback bar. 
 If you click the camera name, the playback bar is set to start at the first image and end at the last image.
 The playback bar moves by jumping to every recorded images.
If you want to move the playback bar to a specific position, move the 
playback bar while holding down the [Shift] key.
 The images surrounded by the playback bar are displayed in the playback list.
Select the camera to play back.Playback bar
Set the start and 
end times by 
dragging the 
playback bar.
Playback list
Images surrounded by the playback bar for the 
selected camera are displayed in the playback list. Displays the time 
selected by the 
playback bar.If you 
set the time 
manually, the 
playback bar moves 
to the set time.
Image Timelines 
Chart 
						

							
Operating Instructions
70
5.Select the recorded images in the playback list.
Playback Screen
The still image at the start time of 
the selected image is displayed.Playback list
Select the recorded image to confirm it.
Start playback of the recorded image on the playback screen by double-clicking it.
6.Confirm the selected image on the playback screen.
Edit menu
Edit the displayed image
(see page 89). Slider bar
The playback position can be set 
by dragging the bar.
Playback screen
Display the 
previous image.
Display the 
next image.
 Start playback.
 Stop playback.
 Pause playback.
The button changes to  while paused. 
To start playback again, click  . 
						

							
Operating Instructions
71
2.5.4Playback Recorded Images on the Multi-Playback Page 
You can simultaneously playback the recorded images of a maximum of 4 
cameras. 
1.Select [Window]  [Recorded Images] on the menu bar.
2.Select the recorded images, set the time period, and click [Playback].
 Recorded images selected on the playback list on the recorded images  page are displayed on the multi-playback  page in the order top left, top right, 
lower left, lower right and playback for the individual cameras.
 Playback the image from the start time set on the playback list. 
If a selected camera has no recorded images at the set time, no image is 
displayed for that camera.
Multi-Playback Page
Select the time unit to display. (See page 72)
Pointing to the 
timelines 
displays the 
camera name.
Cursor
Set the play 
position.
Playback screenAdjust the volume.
Displays the camera name.
Displays the recording time.
Jump button
Displays the time-period button 
in increments of 1 hour. Clicking 
the timer period displays images 
from that hour onwards.
Speed slider bar
Adjust the playback speed.The timelines are displayed in 
different colors depending on the 
recording mode. The colors are 
the same as those on the image 
timelines chart. When multiple 
recording modes overlap, that 
area is displayed as gray. 
						

							
Operating Instructions
72
Playback button
 Pause playback.
The button is changed to  during pause.
To start playback again, click  .
 Stop playback.
 Displays the image at the playback start time.
 Display a previous image from the displayed image.
 Reverse playback.
 Start playback.
 Display a next image from the displayed image.
 Displays the image at the playback end time.
Note
 You can rearrange the images on the multi-playback page by dragging and dropping the images (see 
page 82). When you restart this software, the 
original order is restored.
 The settings (camera name, recording time, frame rate display, number of screens in a window, multi-playback page layout, etc.) can be changed for the 
multi-playback page on the preference page (see 
page 84).
 If there are overlapping recordings on the same camera, the images are played back in the order in which they were recorded. 
00
(Alarm detection recording with timer)
010203Camera name
East side
1
Images are displayed in the order       to       .4
(Motion detection recording with timer)
(Full time recording with timer)
(Full time recording)
00010203Camera name
East side
1
2
3
4 
						

							
Operating Instructions
73
Standard display
If you select [Standard] as the playback-position display format in the multi-
playback page on the preference page (see 
page 85), the image will be displayed 
in standard mode.
Playback screen
Jump button
Displays the time-period button 
in increments of 1 hour. Clicking 
the timer period displays images 
from that hour onwards.
Slider bar
The playback position can be set dragging 
the cursor. Playback will pause while 
dragging the cursor.
Speed slider bar
You can specify the 
playback speed. [x1/16, x1/8, 
x1/4, x1/2, x1, x2, x4, x8, x16]
Note
 Right-clicking on an image displays the edit menu. On the multi-playback 
page, you can copy images to the clipboard, snapshot, perform file 
conversion, change the keywords, and display information about the 
recorded image. For instructions, see “Editing Recorded Images” (see 
page 
89). 
To set the start and end times for a file conversion, click each button and set 
the times.
 If you click  or , the cursor moves by jumpi ng to the time of the next/
previous recorded image. 
						

							
Operating Instructions
74
2.6 Application Window Operation
2.6.1 Selecting Camera
The camera that is selected on the multi-monitoring page is the focus camera.
When you start the software, the first registered camera is set as the focus camera.
 To select multiple cameras, click the ca mera images while pressing [Ctrl] key.
 To select all cameras displayed in the window, select [Select All] from [Layout] 
on the menu, or select 
 on the toolbar.
 To deselect all selected cameras, select [Clear All] from [Layout] on the menu or select 
 on the toolbar.
Focus Camera
Default is a red frame.Selected Camera
Default is a blue frame.
Menu is displayed 
by right-clicking in 
the window.
Select all cameras on the page. 
Deselect the selected cameras on the page.
Note
 If there is more than one page to di
splay, selected cameras are deselected 
when you change pages.
 You can change the width and color of the frames for the focus camera and  selected cameras (see 
page 76).
 You can also select and deselect camera s by using [Select All] and [Clear All] 
from the menu displayed when you right-click in the window. 
						

							
Operating Instructions
75
2.6.2 Multi-Monitoring Page Settings
You can change the camera layout  from the multi-monitoring page.
1.Select [Window]  [Settings] on the menu bar.
2.Click [Preferences]  [Multiple-Monitoring].
3.Configure the settings in the [Multiple-Monitoring] page and click [OK].
Multi-Monitoring Page 
						

							
Operating Instructions
76
SettingDescription
Monitor Screen 
LayoutConfigure the screen layout (rows x columns) for a window. You 
can simultaneously monitor the images of a maximum of 64 
cameras. (1 x 1, 2 x 2 (Default), 3 x 3 to 8 x 8)
Page/Total PageIf the number of registered cameras exceeds the limit of 
screens in a window, extra pages  are automatically created to 
accommodate the number of cameras.
 
If there are several pages, select the page that you want to 
configure settings for.
Setting the camera 
to displayWhen you click  in a display frame, a list of your registered 
cameras is displayed. Select the camera that you want to 
display in the frame.
Click to Center 
FunctionYou can select whether or not to  use the click to center function. 
Clear the check mark if you will not use the function.
Switch the multi 
pages in orderIf there are several pages of  images, select [Switch the multi 
pages in order] to automatically switch the page every specified 
number of seconds (see 
page 80). (1 to 60 seconds Default: 5 
seconds)
Image display 
for matConfigure the aspect ratio of displayed camera images.
Fits the entire display area: Resize the image to fit in the display 
area.
Maintain the aspect ratio: Resize the image to fit the window 
while maintaining the aspect ratio of the camera.
Untouched centering display: Display the image at actual size, 
centering the image in the display frame.
Background colorConfigure the background colors for the frames of disabled 
cameras (see 
page 21), error cameras and no camera (see 
page 80). Specify the colors for each background, respectively. 
The defaults are Disabled camera: Gray, Error camera: Blue 
and No camera: Black.
Set the 
transparency level Select the check box to set the transparency level of the image 
information (camera name, frame rate, motion detection bar, 
recording icon) that is displayed on the multi-monitoring page. 
The default is 50%.
Focus and selected 
frame width/colorYou can change the width and color of the frames for the focus 
camera and selected cameras. Specify the colors for each 
frame respectively. The defaults are frame width: 3, focus 
frame: Red and selected frame: Blue.