Panasonic Network Camera Recorder With Viewer Software Important Information Manual

							
Operating Instructions
11 7
2.9 Other Features
2.9.1 Audio Transmission
Using this software, you can transmit audio to a camera that supports 
transmission.
1.Click  on the toolbar.
Click  , and the icon will change to .
 If the selected camera does not support transmission, icon returns to .
2.Audio is transmitted while  displayed.
 You can transmit audio to focus cameras and selected cameras.
3.Click  and finish the transmission. 
 will change to .
Note
 Transmitting audio requires a microphone connected to your PC. 
You must provide your own microphone.
 During transmission, the volume icon changes to .  
When transmission is terminated, the icon returns to .
 If you are accessing the camera via a proxy server, you cannot use the transmit function. 
						

							
Operating Instructions
11 8
2.9.2 Exporting/Importing the Camera Information
You can import and export the setting information for cameras.
The camera information can be exported for use on another PC with this software 
installed.
1.Select [Window]  [Settings] on the menu bar.
2.Click [Export] or [Import].
Export button
Import button 
						

							
Operating Instructions
11 9
Exporting the Camera Information
1.Click [Export].
 The export file save window is displayed.
2.Enter the destination file name and click [Save].
 The camera information is exported.
Note
BB-HNP15: Exported file extension is “h15”.
BB-HNP60: Exported file extension is “def ”.
BB-HNP11: Exported file extension is “h11”.
Importing the Camera Information
1.Click [Import].
 The import file selection window is displayed.
2.Select the file to import.
 To import camera information for BB-HNP60, select [HNP60 Camera Definition File (*.def)] as the file type. 
 
To import camera information for BB-HNP11, select [HNP11 Camera 
Definition File (*.h11 ) as the file type.
 
To import the camera information BB-HNP15, select [HNP15 Camera 
Definition File (*.h15) as the file type.
3.Click [Open].
 The camera information is imported.
Note
 This software can import camera information for BB-HNP15, BB-HNP11 and 
BB-HNP60.
 
BB-HNP15 and BB-HNP11: All camera information can be imported. 
BB-HNP60: Only basic settings and image settings can be imported.  
BB-HNP60 setting information file is saved in the installation folder.
 If a timer is set for BB-HNP60 Version 1.0, the timer recording method is 
imported as [Motion detection recording only]. 
						

							
Operating Instructions
120
2.9.3 Copying Camera Images
You can copy camera images to the clipboard from the multi-monitoring page.
1.Right-click the image on the multi-monitoring page.
• The menu window is displayed.
2.Select [Copy To The Clipboard].
 This software copies the image to the clipboard.
Note
 The clipboard is a place to temporarily save in copying or pasting data. 
The copied image can be used in the program such as Paint.
 If you select [Snapshot] on the displayed menu, a still image is captured from  the displayed image. 
						

							
Operating Instructions
121
2.9.4 Deleting the Registered Cameras from the List
When you delete a camera, you can choose whether or not the camera’s recorded 
images are deleted.
1.Select [Window]  [Settings] on the menu bar.
2.Select the camera to delete.
3.Click [Delete Camera].
Delete Camera button
Select the camera to delete.
4.To delete the recorded images, click [Delete recorded Images].  
To keep the recorded images, click [Do not delete recorded images]. 
						

							
Operating Instructions
122
 A deletion mark is displayed on the icon of the camera item.
5.Click [OK] or [Apply].
 If you click [OK], [Settings] page will close.  
If you want to delete another camera, click [Apply].
Note
 If you click [Do not delete recorded images], the recorded images are not deleted even after the camera is deleted. “Deleted camera + Camera ID” will 
be displayed in the recorded images page.
 If you want to delete the recorded images of the deleted camera, select and delete the recorded images from the pl ayback list on the [Recorded Images] 
page (see 
page 100), or click [Execute Restore Program] from [Operation 
Support] (see page 127). 
						

							
Operating Instructions
123
2.9.5 Deleting the Timer Setting
You can delete timer settings.
1.Select [Window]  [Settings] on the menu bar.
2.Select the timer to delete.
3.Click [Delete Timer].
Delete Timer button
Select the timer to delete.
 The following confirmation window will be displayed. 
						

							
Operating Instructions
124
4.Click [OK].
 A deletion mark is displayed on the icon of the timer item (see page 44). 
5.Click [OK] or [Apply].
 If you click [OK], [Settings] page will close.  
If you want to delete another timer, click [Apply]. 
						

							
Operating Instructions
125
2.9.6 Checking the Recording Capacity and Remaining 
Time
If you set the recording capacity limit, you can confirm the recording capacity and 
the amount of space used for individual cameras.
1.Select [Window]  [Settings] on the menu bar.
2.Select [Preferences]  [Navigation].
 The display of this page will differ depending on whether you have limited 
the recording capacity for the destin ation drive or for individual cameras.
When you have set a limit for the recording cap acity for the destination drive (see page 13)
Displays the total size of the 
recording capacity limit for individual 
cameras and the amount of 
guaranteed free space for the 
destination drive.Displays the length (hours) or size 
(MB) of the recorded images and the 
percentage of the recording capacity 
being used for each camera.
You can change the display unit of the Recorded 
Time/Recorded Capacity (see page 126).
Displays the total amount of the 
recording capacity limit and the 
capacity for the rest of the 
destination drive.
Displays the total capacity of the 
destination drive that is selected in 
Preferences (see page 13). 
						

							
Operating Instructions
126
When you have set a limit for the recording capacity for the individual cameras (see page 26)
When you have selected [Recorded Capacity] from display unit.
Displays the combined size of the 
recording capacity limit for individual 
cameras and the capacity for the 
rest of the destination drive.
Displays the recording capacity limit for 
each individual camera, and the 
guaranteed free space for the destination 
drive. Displays the limited recording time 
(capacity), the length (hours) or size (MB) 
of the recorded images and the 
percentage used for each camera.Displays the total capacity of the 
destination drive that is selected in 
Preferences (see page 13).
You can change the display unit of the 
[Recorded Time]/[Recorded Capacity] list.