Panasonic Network Camera Recorder With Viewer Software Important Information Manual

							
Operating Instructions
37
2.2 Network Camera Recorder Window
2.2.1 About the Application Windows
Full screen mode and Window mode
You can change the window display between full screen mode (expanding the 
window over the entire desktop) or window mode (always displaying the title bar, 
menu bar and toolbar).
1.Select [Display Mode]  [Full Screen Mode] or [Window Mode] on the menu 
bar.
Full screen mode
Sliding window
(See page 48)
The toolbar is displayed 
when the mouse is 
moved upward.
Changes the display to 
Window mode.
Window mode
Title bar
Displays the name of the software and the currently displayed 
window.
Menu bar
(See page 46)
Tool bar
(See page 48)
Changes the display 
to Full screen
mode. 
						

							
Operating Instructions
38
Multi-Monitoring Page
The images from registered cameras are displayed in the multi-monitoring page 
(see 
page 49).
1.Select [Window]  [Multi-Monitoring] on the menu bar.
 You can change the number of camera screens to display (see page 76). 
Default is four-screen layout (2 rows x 2 columns). 
Four-screen layout Sixteen-screen layout
 You can rearrange the order of camera screens (see page 82) and enlarge 
a camera display area (see page 78).
Note
If you double-click a cameras image on the multi-monitoring page, the display 
will switch to the single-monitoring page. When you double-click on the single-
monitoring page, the display will return to the multi-monitoring page. 
						

							
Operating Instructions
39
Single-Monitoring Page
In the single-monitoring page, a single image from the focus camera is displayed.
1.Select [Window]  [Single-Monitoring] on the menu bar.
 A single image from the focus camera is displayed.
Note
 If you double-click a cameras image on the multi-monitoring page, the display will switch to the single-monitoring page. When you double-click on 
the single-monitoring page, the display will return to the multi-monitoring 
page.
 If the click to center function is active, the display area of a camera image may move when you double-click the image. You can disable the click to 
center function (see 
page 76).
 The single-monitoring page does not support switching pages. If the single-monitoring page is displayed while switching is running on the multi-
monitoring page, switching is stopped. Switching will restart after returning to 
the multi-monitoring page. 
						

							
Operating Instructions
40
Recorded Images Page
The timelines are displayed in the chart on the recorded images page (see page 
65). The camera name, recording time and recording mode can be checked on this 
page. Image searching, playback and data conversion can be also operated on this 
page.
1.Select [Window]  [Recorded Images] on the menu bar.
2.Click [Search].
 The window displays a list for the most recent day with recorded images.
Search window(See page 67)
Search Button
Image Timelines 
Chart
(See page 65)
Playback list
If you select a camera name in the image 
timelines chart, the cameras recorded 
images list will be displayed in the 
playback list (see page 69).
Playback Screen
One selected 
recorded image is 
displayed/played-
back (see page 
70). 
The recorded 
images that are 
checked on the 
playback list will be 
played on the multi-
playback page 
(see 
page 71)
.
The displayed data can be 
edited 
(see page 89).
The day on which the most recent images were recorded is selected and displayed in 
the list. 
						

							
Operating Instructions
41
Note
 When you click the search button, days that have recorded images are displayed in boldface on the calendar. Clicking one of these days displays the 
list of images for that day (see 
page 65).
 If you press [Ctrl]-[Tab] key, the windows will cycle through [Single-Monitoring] - [Multi-Monitoring] - [Multi-Playback] - [Recorded Images] in that 
order.
 You can change the items that are disp layed in the playback list (see page 
88). 
						

							
Operating Instructions
42
Multi-Playback Page
The recorded images that are selected in the recorded images page are 
simultaneously playback on the multi-playback page.
 
To display images in the multi-playback  page, set the playback time and select the 
recorded images in the recorded images page (see page 69). 
You can change the screen layout to display, 1 screen or 4 screens (see page 85). 
In the 4-screen layout, you can simultan eously playback the recorded images of 4 
cameras. You can select the display format: [Display timelines as chart] or 
[Standard] (see 
page 85).
1.Select the desired recorded image in the  [Playback list] in [Recorded Images] 
page, then click [Palyback] (see page 
40).
Display timelines as chart
If a selected camera has no 
recorded images at the set time, no 
image is displayed for that camera.
Standard
Note
If you press [Ctrl]-[Tab] key, the windo ws will cycle through [Single-Monitoring] - 
[Multi-Monitoring] - [Multi-Playback]  - [Recorded Images] in that order. 
						

							
Operating Instructions
43
Settings Page 
From the settings page, you can configure the environment settings, register and 
delete cameras, configure camera settings, and add and delete timers.
1.Select [Window]  [Settings] on the menu bar.
Add Camera (See page 19)/Delete Camera (See page 121) 
Add Timer (See page 59)/Delete Timer (See page 123)
Importing/Exporting the Camera Information (See page 118)
Configure settings for individual cameras (see page 19). The configuration window of the item 
that is selected on the left is displayed.
Configure the 
environment 
settings for this 
software.
Preferences 
(See 
page 12)
Proxy Server 
Settings
 
(See page 17)
Multi-Monitoring
 
(See page 75)
Multi-
Playback 
(See page 84)
Recorded Images
(See page 87)
Navigation (See 
page 125)
Operation Support  
(See page 127)
(See page 44) 
						

							
Operating Instructions
44
[Settings List Display]
The settings list is displayed in tree form.
Expand an item by clicking       , and collapse an item by clicking       .       
ClickClickClick
[OK Button, Cancel Button, Apply Button]
Apply changes to the settings and close the window.
Close the window without applying changes.
Apply changes but leave the window open. 
Use [Apply] to save your changes while configuring several 
different settings.
 
If you have not made any changes, this button will be 
unavailable.
[Setting Change Icon Display]
When you change a setting, a mark is displayed on the icon for the item that you 
changed.
 
The mark is deleted after the setting is applied by clicking [OK] or [Apply].  
If the settings window is closed (e.g., by clicking [Cancel]) while the mark is 
displayed, the setting change will not be applied.
Setting value changed: A green checkmark is displayed.
The mark is removed after the setting is applied 
by clicking [OK] or [Apply]. Setting value added: A blue plus-sign is displayed.
Setting value deleted: A red X-mark is displayed. 
						

							
Operating Instructions
45
Camera Operation Bar
You can display the camera operation bar and operate the camera (see page 52).
1.Click the camera screen that you want to operate.
2.Select [Window]  [Camera Operation] on the menu bar.
 The camera operation bar of the selected camera is displayed.
You can move the location of the operation bar by dragging 
(moving the mouse while holding down the left button) on the title.
Note
The display of the operation bar will differ depending on the camera type. 
						

							
Operating Instructions
46
Menu Bar
File
Layout
Recording
Exit
Next Page
Start Recording
Start Motion Detection
Recording
Stop Recording Alarm/Sensor Recording
Start All
Start Alarm 1/Sensor
Start Alarm 2
All Camera
Enable 
Disable 
Enable 
Disable 
Selected Camera Next Camera
Previous Camera
Previous Page
Select All
Clear All
Close Operation Window
Display the next multi-monitoring page. 
(Enable if there is a next page, and 
disable if there is not a next page.)
Start manual recording.
Start manual motion detection
recording.
Stop all manual recordings.
Start manual alarm/sensor recording of all. 
Start manual alarm1/sensor recording.
Start manual alarm2 recording.
Enable all registered cameras.
Disable all registered cameras.
Enable the selected cameras.
Disable the selected cameras.
Move control to the next camera. 
(Enable if there is a next camera, 
disable if there is not a next camera.)
Move control to the previous camera. 
(Enable 
if there is a previous camera and 
disable if there is not a previous camera.)
Display the previous multi-monitoring page. 
(Enable if there is a previous page, and 
disable if there is not a previous page.)Select all displayed cameras. (When you 
change pages, the selected will be cleared.)
Clear the selection from all cameras.
Playback
Start Playback
Reverse Playback
Pause
StopStart playback.
Reverse playback.
Pause playback.
Stop playback.