Panasonic Network Camera Recorder With Viewer Software Important Information Manual

Operating Instructions
57
2.4.3 Motion Detection Recording
Motion detection recording starts when the [Threshold to Start Recording] value is exceeded. 
Set the [Threshold to Start Recording] value for individual cameras (see page 28). 
Motion detection recording only operates when the JPEG format is selected.  
If the MPEG-4 format is selected, change the format to JPEG (see page 24).
1.Select the camera to record motion detection from the multi-monitoring page.
 A red frame is displayed around the...

Operating Instructions
58
2.4.4 Alarm Recording
When the signal of an alarm that is attached to the camera is detected, alarm 
recording starts. 
 
Set the alarm detection method for individual cameras (see page 31). 
Alarm recording only operates when the JPEG format is selected. If the MPEG-4 
format is selected, change  the format to JPEG (see 
page 24).
1.Select the camera to record from the multi-monitoring page.
 A red frame is displayed around the selected camera.
 To select multiple cameras,...

Operating Instructions
59
2.4.5 Timer Recording
You can specify the day of the week and period of time for recording. 
10 timers can be set for each camera.
Setting Timer
1.Select [Window]  [Settings] on the menu bar.
2.Select the camera for which to set a timer and click [Add Timer].
 [New Timer] is added to the timer list of selected camera.
When you click [Add Timer], a [New Timer] item is added.
[Add Timer]  Button The configuration 
window of the item 
that is selected 
timer on the left is...

Operating Instructions
60
3.Configure the settings in the [Timer Settings] page, and click [OK] or [Apply].   
 If you click [OK], timer settings page will close.  
If you want to register another timer, click [Apply].
 If you want to set the keyword for the recorded images, enter a keyword on 
the keyword page (see 
page 62).
Timer Settings Page 

SettingDescription
Enable/DisableEnable or disable timers.
 Timer recording is available only when a timer is enabled. Disabled timers do not record.
Timer NameEnter a timer name. (Maximum 24 characters.) 
The timer name is displayed on the timer list page.
Timer ScheduleTo set a timer, set start time, end time and the day of the week.
 Checking [Daily] sets the daily timer recording during the specified time period.
 If you set the day of the week, check [Day of the Week Setting] and specify the day...

Operating Instructions
62
Setting Keywords for Timer Recorded Images
You can set a keyword for the images recorded by individual timers. 
You can search recorded images by setting a keyword.
1.Click [Keyword] of the timer to set.
2.Enter a keyword and click [OK].
Keyword Page
Note
2 keywords can be set (max. 40 characters each). 

Operating Instructions
63
Displaying Timer List
The timer schedules of the individual cameras is displayed in a chart.
1.Select the camera whose timers you want to display and click [Timer List].
Timer List Page
Note
Colors displayed in charts can be changed in [Recorded Images] page in 
[Preferences]. See 
page 77 for instructions on setting the color.When you 
change the color, the display on the timer list page, recorded images page and 
multi-display page is changed for all registered cameras.
  

Operating Instructions
64
2.5 Playing the Recorded Images
Playback operation is explained below.Search for the images to playback (see pages 65, 67)
Display the days that have recorded images are displayed in boldface on 
the calendar.
Select the day that has  the images to playback
Displays the recorded-image list on the Image Timelines Chart.
Drag the playback bar, and select the time to playback (see page 69)
The images in the selected time frame are displayed in the playback list.
Confirm the images...

Operating Instructions
65
2.5.1 Display the Recorded Images 
The timelines are displayed in the chart on the recorded images page. 
1.Select [Window]  [Recorded Images] on the menu bar.
2.Click [Search].
 The days that have recorded images are displayed in boldface on the calendar.
 If you want to specify search criteria, enter the criteria and then click [Search] (see 
page 67).
3.Click the day on the calendar.
Displays the month that contains the most recent images that match the criteria.
Image...

The selected range is enlarged.Images are displayed with different colors for 
each recording method.
Display in 24-h mode.
Select the time unit to display.
playback barImages are displayed for each camera.
Cameras are displayed in the order that they 
were registered.
The timer-recorded images are displayed with 
the timer name.
Operating Instructions
66
Note
Colors displayed in charts can be changed in [Recorded Images] page in 
[Preferences].
 
See page 77 for instructions on setting the color. When...