Home
>
Panasonic
>
Recorder
>
Panasonic Network Camera Recorder With Viewer Software Important Information Manual
Panasonic Network Camera Recorder With Viewer Software Important Information Manual
Here you can view all the pages of manual Panasonic Network Camera Recorder With Viewer Software Important Information Manual. The Panasonic manuals for Recorder are available online for free. You can easily download all the documents as PDF.
Page 121
Operating Instructions 107 2.8.1 Configuring the Settings To use remote access functions, you must install the recording software on the remote server and remote clients. Before you can use remote access functions, you must install the recording software on your PC. Note You must register one license for each remote server and remote client PC. If you do not use remote access functions, this software install on the remote server and remote client can use the software as a normal recording...
Page 122
![Page 122
Operating Instructions
108
4.Click [Yes].
• After you restart the program, it will operate as a remote server.
Note
Available functions differ for administrator privileges and general user
privileges (see page 111).
You cannot use remote access until you configure the administrator or general user settings.
Clear the [Use Remote Access Connection] check box to use the program as a normal recording software.
To use remote access via the Internet, configure a port for port forwarding. For...](http://img.usermanuals.tech/thumb/58/74603/w300_bb-hnp11_en_ii_om_d-121.png "Page 122
Operating Instructions
108
4.Click [Yes].
• After you restart the program, it will operate as a remote server.
Note
Available functions differ for administrator privileges and general user
privileges (see page 111).
You cannot use remote access until you configure the administrator or general user settings.
Clear the [Use Remote Access Connection] check box to use the program as a normal recording software.
To use remote access via the Internet, configure a port for port forwarding. For...")
Operating Instructions 108 4.Click [Yes]. • After you restart the program, it will operate as a remote server. Note Available functions differ for administrator privileges and general user privileges (see page 111). You cannot use remote access until you configure the administrator or general user settings. Clear the [Use Remote Access Connection] check box to use the program as a normal recording software. To use remote access via the Internet, configure a port for port forwarding. For...
Page 123
![Page 123
Operating Instructions
109
[Remote Client Settings (remote client function)]
Configure the following settings after installing this software on a PC to be used as
a remote client.
1.Select [Remote Access] [Settings] on the menu bar.
2.Select the [Use Remote Access Connection] check box on the [Settings]
screen.
3.Select [Operate as a client] and click [OK].
4.Click [Yes].
After you restart the program, it will operate as a remote client.
Note
When operating as a remote client, is not displayed...](http://img.usermanuals.tech/thumb/58/74603/w300_bb-hnp11_en_ii_om_d-122.png "Page 123
Operating Instructions
109
[Remote Client Settings (remote client function)]
Configure the following settings after installing this software on a PC to be used as
a remote client.
1.Select [Remote Access] [Settings] on the menu bar.
2.Select the [Use Remote Access Connection] check box on the [Settings]
screen.
3.Select [Operate as a client] and click [OK].
4.Click [Yes].
After you restart the program, it will operate as a remote client.
Note
When operating as a remote client, is not displayed...")
Operating Instructions 109 [Remote Client Settings (remote client function)] Configure the following settings after installing this software on a PC to be used as a remote client. 1.Select [Remote Access] [Settings] on the menu bar. 2.Select the [Use Remote Access Connection] check box on the [Settings] screen. 3.Select [Operate as a client] and click [OK]. 4.Click [Yes]. After you restart the program, it will operate as a remote client. Note When operating as a remote client, is not displayed...
Page 124
![Page 124
Operating Instructions
11 0
[New Connection (remote client function)]
1.Select [Remote Access] [New Connect] on the menu bar.
2.Enter the Server Address (IP address or domain name) and port number of the
remote server, and then click [Connect].
The [Remote Access Authentication] page will be displayed when the remote server connection is successful.
3.Enter the user name and password configured for the remote server and click
[OK].
If you enter the administrator name and password, the client...](http://img.usermanuals.tech/thumb/58/74603/w300_bb-hnp11_en_ii_om_d-123.png "Page 124
Operating Instructions
11 0
[New Connection (remote client function)]
1.Select [Remote Access] [New Connect] on the menu bar.
2.Enter the Server Address (IP address or domain name) and port number of the
remote server, and then click [Connect].
The [Remote Access Authentication] page will be displayed when the remote server connection is successful.
3.Enter the user name and password configured for the remote server and click
[OK].
If you enter the administrator name and password, the client...")
Operating Instructions 11 0 [New Connection (remote client function)] 1.Select [Remote Access] [New Connect] on the menu bar. 2.Enter the Server Address (IP address or domain name) and port number of the remote server, and then click [Connect]. The [Remote Access Authentication] page will be displayed when the remote server connection is successful. 3.Enter the user name and password configured for the remote server and click [OK]. If you enter the administrator name and password, the client...
Page 125
Operating Instructions 111 Functions available for remote accessFunction name Administrator privileges User privileges Simultaneous launch *1 Multi-Monitoring Camera Image OOO Change the camera layoutOX X Change the Image display formatOX X Switch pageOOO Start/stop recording OXO Camera operationsOOO Audio muteOOO Enable/disableOX X Multi-Playback Playback, Stop, etc. OOO Change the camera layoutOX X Change the Image display formatOX X Recorded Images Search ∆*2∆*2O ConversionX*3X*3X CopyingOX X...
Page 126
Operating Instructions 11 2 *1Indicates which functions can and cannot be on a remote server and the remote client at the same time. *2User-specified folders cannot be searched. *3You cannot perform file conversion, but you can download recorded images (see page 114). Note When settings pages are displayed on the remote server, a remote client cannot use administrator privileges to connect to the settings pages. If a connection reset is connected after connecting to a remote server, the...
Page 127
![Page 127
Operating Instructions
11 3
[Delete a Remote Client (remote server function)]
Delete a remote client that was registered automatically.
1.Select [Remote Access] [Client Control] on the menu bar.
2.Select clients you want to delete on the [Client Control] page, and click
[Delete].
3.Click [OK].
Note
You can register up to 50 remote clients.
Duplicate registration codes cannot be registered.
To change information for a remote client, select the remote client and click
[Change]. After you have...](http://img.usermanuals.tech/thumb/58/74603/w300_bb-hnp11_en_ii_om_d-126.png "Page 127
Operating Instructions
11 3
[Delete a Remote Client (remote server function)]
Delete a remote client that was registered automatically.
1.Select [Remote Access] [Client Control] on the menu bar.
2.Select clients you want to delete on the [Client Control] page, and click
[Delete].
3.Click [OK].
Note
You can register up to 50 remote clients.
Duplicate registration codes cannot be registered.
To change information for a remote client, select the remote client and click
[Change]. After you have...")
Operating Instructions 11 3 [Delete a Remote Client (remote server function)] Delete a remote client that was registered automatically. 1.Select [Remote Access] [Client Control] on the menu bar. 2.Select clients you want to delete on the [Client Control] page, and click [Delete]. 3.Click [OK]. Note You can register up to 50 remote clients. Duplicate registration codes cannot be registered. To change information for a remote client, select the remote client and click [Change]. After you have...
Page 128
![Page 128
Operating Instructions
11 4
[Download Recorded Images (remote client function)]
Download recorded images from the remote server.
1.Select the images that you want to download in [Playback list].
See page 89 for how to display recorded images in [Playback list].
To select multiple images, click the images while pressing [Ctrl] key.
2.Select the [Download] from the editing menu and click [Execute].
Available functions differ for administrator privileges and general user
privileges (see page 111)....](http://img.usermanuals.tech/thumb/58/74603/w300_bb-hnp11_en_ii_om_d-127.png "Page 128
Operating Instructions
11 4
[Download Recorded Images (remote client function)]
Download recorded images from the remote server.
1.Select the images that you want to download in [Playback list].
See page 89 for how to display recorded images in [Playback list].
To select multiple images, click the images while pressing [Ctrl] key.
2.Select the [Download] from the editing menu and click [Execute].
Available functions differ for administrator privileges and general user
privileges (see page 111)....")
Operating Instructions 11 4 [Download Recorded Images (remote client function)] Download recorded images from the remote server. 1.Select the images that you want to download in [Playback list]. See page 89 for how to display recorded images in [Playback list]. To select multiple images, click the images while pressing [Ctrl] key. 2.Select the [Download] from the editing menu and click [Execute]. Available functions differ for administrator privileges and general user privileges (see page 111)....
Page 129
![Page 129
Operating Instructions
11 5
The save as window is displayed.
4.Select the destination folder, enter a file name and click [Save].
5.Click [Start].
Conversion will begin on the remote server.
Download will begin on the remote client.
When the download has completed successfully, the following window is
displayed.
When you select multiple recorded images, start time and end time are not displayed.](http://img.usermanuals.tech/thumb/58/74603/w300_bb-hnp11_en_ii_om_d-128.png "Page 129
Operating Instructions
11 5
The save as window is displayed.
4.Select the destination folder, enter a file name and click [Save].
5.Click [Start].
Conversion will begin on the remote server.
Download will begin on the remote client.
When the download has completed successfully, the following window is
displayed.
When you select multiple recorded images, start time and end time are not displayed.")
Operating Instructions 11 5 The save as window is displayed. 4.Select the destination folder, enter a file name and click [Save]. 5.Click [Start]. Conversion will begin on the remote server. Download will begin on the remote client. When the download has completed successfully, the following window is displayed. When you select multiple recorded images, start time and end time are not displayed.
Page 130
![Page 130
Operating Instructions
11 6
[Analyzing Remote Server Logs (remote client function)]
During remote access, the following menus are added to the log type in the
operation support page (see
page 127):
System Log (server)
Operation Log 1 (server)
Operation Log 2 (server)
Restore Log (server)
Select when analyzing remote server logs.
1.Select [Window] [Settings] on the menu bar.
2.Select [Preferences] [Operation Support].
3.Select the date of the logs to analyze, log type.
4.Click [Executing Log...](http://img.usermanuals.tech/thumb/58/74603/w300_bb-hnp11_en_ii_om_d-129.png "Page 130
Operating Instructions
11 6
[Analyzing Remote Server Logs (remote client function)]
During remote access, the following menus are added to the log type in the
operation support page (see
page 127):
System Log (server)
Operation Log 1 (server)
Operation Log 2 (server)
Restore Log (server)
Select when analyzing remote server logs.
1.Select [Window] [Settings] on the menu bar.
2.Select [Preferences] [Operation Support].
3.Select the date of the logs to analyze, log type.
4.Click [Executing Log...")
Operating Instructions 11 6 [Analyzing Remote Server Logs (remote client function)] During remote access, the following menus are added to the log type in the operation support page (see page 127): System Log (server) Operation Log 1 (server) Operation Log 2 (server) Restore Log (server) Select when analyzing remote server logs. 1.Select [Window] [Settings] on the menu bar. 2.Select [Preferences] [Operation Support]. 3.Select the date of the logs to analyze, log type. 4.Click [Executing Log...