Panasonic Network Camera Recorder With Viewer Software Important Information Manual

Operating Instructions
147
Change the keyword
Keyword1 should be 40 
characters or less. Keyword1 was more than 40 characters.→ Follow the instruction message.
Keyword2 should be 40 
characters or less. Keyword2 was more than 40 characters.
→ Follow the instruction message.
Snapshot
A snapshot writing error has 
occurred. If a writing error occurred when saving a file, or 
the file has been opened by another 
application.
→ Confirm that you have write permissions for 
the save destination.
→ Close...

Operating Instructions
148
Record
The receiving frame rate from the 
camera is low and cannot keep the 
recording frequency. Recording 
has not been stopped, but the 
recorded images will not match to 
the recording frequency setting. 
This message will be displayed 
again in the same occasion. If you 
don’t need to display this message 
again, uncheck the “Display the 
error message if the program does 
not work in the specified 
frequency” in image settings.→Follow the instruction message.
**** has...

Operating Instructions
149
Import/Export
Recording has stopped because 
either there is insufficient free disk 
space or the disk cannot be written 
on.
 
Confirm that there is sufficient free 
space on the save destination disk 
and that the save destination 
folder is in a writable condition, 
then try recording again.
 The destination free space has reached the limit set on the preferences page, or the save 
destination folder is not writable and recording 
is stopped.
→
1.Decrease the save...

Operating Instructions
150
Other Errors
Exporting failed. This software cannot export to the file at [Settings].
→ Check the permissions for the destination 
drive/folder.
The number of registered cameras 
reached the maximum of ** 
cameras, so importing was 
canceled.
**** =
The number of registered cameras 
(1 or 64)
 If the maximum number of registered cameras 
is exceeded during import.
→ Delete unnecessary cameras.
MessageCause and Remedy
The total size of the recording 
capacity limit and the...

Operating Instructions
151
The file could not be found. The Operating Instructions file is not in software folders. (The file may be manually 
deleted.)
→ Install this software again.
PDF related applications could not 
be found. Install Adobe® Reader®.
 Adobe Reader could not be found.
→ Install Adobe Reader and try again.
The web browser could not be 
started. Start the web browser and 
access the following URL.
 http://***
 ***=Camera Address  Web browser could not be started (support...

Operating Instructions
152
Remote Access
The folder path exceeds 100 
Characters.
Specify a path that is under 100 
Characters.
[Current Destination Folder]
***
 ***=Destination Folder→
Follow the instruction message.
There is no access right to the 
specified folder. Check the folder.→Follow the instruction message.
MessageCause and Remedy
Enter “Server Address”.→Follow the instruction message.
Enter “Port”.→Follow the instruction message.
Enter a number in one-byte 
character in Port.→Follow the...

Operating Instructions
153
Enter a number in one-byte 
character in Port.→Follow the instruction message.
Failed to connect.  If a connection to the remote server cannot be 
established.                                                                                             
→ Confirm that the remote server is properly 
r u n n i n g .                                                                                                                     
→ Confirm the new connection settings.
Access...

Operating Instructions
154
The server is busy. Wait for a 
moment and then try again.  When performing a specific action (e.g., navigation), the server cannot respond to 
other requests. (Remote client, Remote 
server)
→ Follow the instruction message.
Message Cause and Remedy 

Operating Instructions
155
2.13Default Setting List
ItemsDefault
PreferencesBasic 
SettingsDestination FolderInstall folder
crdata
Destination Hard Disk 
Space
100 MB
Limit the destination 
recording capacity-
Operation when recording 
capacity reached a limitStop all the recordings.
Destination Recording 
Capacity Limit1 GB
Connection method to the 
cameraAudio and images are 
sent using one 
connection.
Proxy 
Server 
SettingsUse a proxy server-
Proxy Server Address-
Po r t-
Proxy User Name-
Proxy...

Operating Instructions
156
PreferencesMulti- 
MonitoringSet the transparency level-
Transparency 50%
Focus and selected frame 
width3
Focus frame colorRed
Selected frame colorBlue
Text colorBlack
Display the camera name-
Display the frame rate-
Specify the frame rate2 frames/1 second
Adjust the monitoring 
refresh rate when the CPU 
is highly loadedWhen the CPU is 
loaded more than 80 %, 
the refresh rate is 
paused for 15 seconds.
Multi- 
PlaybackPlayback Screen Layout2 x 2
Playback position display...