Panasonic Network Camera Recorder With Viewer Software Important Information Manual

Display ModeWindow
Multi-MonitoringFull Screen Mode
Change the display to full screen mode.
Window ModeChange the display to window mode.
Display the multi-monitoring page. 
Single-MonitoringDisplay the single-monitoring page. 
Multi-PlaybackDisplay the multi-playback page. 
Recorded Images Display the recorded images page. 
Camera Operation Display/Hide the camera operation bar.
SettingsDisplay the set environment page.
Remote Access
SettingsDisplay the remote access settings page. 
New ConnectConnect...

Operating Instructions
48
Icon of Toolbar and Slide Window
Move the focus to the previous 
camera. (Enable if there is a 
previous camera and disable if 
there is not a previous camera). Close the operation window.
Set the volume of the selected 
camera (see page 83).
Operate remote access 
(see page 105).
Reconnect to the server 
(see page 110).
Change the display to full 
screen mode.
Change the display to 
window mode.
Display/Hide the camera 
operation bar. 
Take snapshots from the 
focus camera....

Operating Instructions
49
2.3 Monitoring the Camera
2.3.1 Multi-Monitoring Page
After registering a camera, the camera’s images are displayed on the multi-
monitoring page.
Display the camera name (see page 21). 
Frame rate (image refreshing frequency)
(see page 77). 
         is displayed when monitoring 
is paused 
(see page 81).   
         is displayed when 
recording is paused.
   Focus camera (See page 74)  
Note
 The camera that is selected on the multi-monitoring page is the focus 
camera.
...

Operating Instructions
50
 Audio is played back for the focus camera and the selected camera. 
You can adjust volume with  on the toolbar (see page 83).
 When you monitor a camera that supports audio, audio may be interrupted due to your PC performance or network environment. In this case, lower the 
maximum bandwidth setting on the network page of the camera.
 If you select [Maintain the aspect ratio] for the image display format in [Preferences] - [Multi-Monitoring], cameras with their resolution...

Operating Instructions
51
Click to center
You can center the camera image on a desired point by clicking in the focus 
camera.
cursor
Click the desired point in the focus camera. The camera centers on the point that you 
clicked.
Note
 The camera may not be able to center on the clicked point.
 The click to center functions ca
n be stopped when not in use (see page 76). 

Operating Instructions
52
2.3.2 Using the Camera Operation Bar
You can use the camera operation bar that is displayed on the multi-monitoring 
page to operate the camera.
1.Select [Window]  [Camera Operation] on the menu bar.
Allows you to remotely control external devices that are 
connected to the camera. Set according to the external 
device that is connected.
c.Pan/Tilt 
Scan *1
a.Preset Display
RefreshThe latest registered buttons are displayed (see page 54). b.
Preset 
Button*1(See page 54).e....

Zooming in and out  
(Cameras available for the zooming in and out 
function)
Clicking tele button  zooms in (maximum 42x*1), 
clicking wide button  zooms out. The camera 
zooms in or out at a regular rate.
Focusing
(Cameras available for the focusing function)
The camera has automatic or manual focusing 
features.
• Automatic Focus 
Click  button. 
It is recommended to use automatic focus. 
You can return to automatic focus from manual focus 
clicking 
 button.
 Manual Focus 
Clicking  or  sets the...

Using Preset Buttons/Preset List
The camera preset buttons/preset list can be used. 
Clicking home position/preset buttons (1-8) or  selecting the list changes position to 
registered position.
 Registered buttons are displayed blue. 
 Unregistered buttons are displayed gray.
1.Click the preset number or  select the preset list.
 When clicking a preset button, the preset name 
appears.Left End
Note
 If the preset button is changed while this software is being used, the change 
is not reflected on...

Operating Instructions
55
2.4 Recording the Image
2.4.1 Recording Method
You can record by using the following 4 methods.
Manual Recording (See page 56)
Select a camera, and start recording with .
Motion Detection Recording (See page 57)
Select a camera and set motion detection recording with . 
When the “Threshold to Start Recordi ng” value is exceeded, motion detection 
recording starts.
Alarm/Sensor Recording (See page 58)
Select a camera and set alarm/sensor recording with .
When the alarm or sensor...

Operating Instructions
56
2.4.2 Manually Recording the Image
This software allows you to manually record images. 
Recording is operated with the settings that are configured on the image settings 
page (see 
page 23).
1.Select the camera to record from the multi-monitoring page.
 A red frame is displayed around the selected camera.
 To select multiple cameras, click the camera images while holding down the  [Ctrl] key. A blue frame is displayed around the selected cameras.
 
(A red frame is displayed...