Panasonic Network Camera Recorder BB-HNP11A Operating Instructions
Have a look at the manual Panasonic Network Camera Recorder BB-HNP11A Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Operating Instructions Please read this manual before using and save this manual for future reference. Network Camera Recorder Model No. BB-HNP11A
Operating Instructions 2 Main Features Recording or Playing Images with Audio This software records or plays images with audio from the camera*1 (see page 59). Since you can record images with audio, recorded images become impressive. For example, you can use the images with audio for training employee after you record your shop scene. This software can also record multiple cameras simultaneously. Advanced Motion Detection Recording Motion detection recording is improved from BB-HNP60. You can set a time (1— 60 seconds) to record before or after motion detection (see page 35). You can check the detail condition when the motion was detected. Advanced Timer Recording and Search Ability You can set a keyword in timer recording (see page 56). You can manage images by keyword. 10 settings can be set in timer recording for each camera. Additionally, you can search images by time, recording method (such as timer recording and motion detection recording), or keyword (see page 63). Other Features Layout Feature of Operation Window (see page 39 to page 41) You can change size or location of camera list or operation bar for the camera, or you can display them separately. Camera List (see page 66) The registered cameras can be listed, and the camera preview size can be set in 6 levels. Recording Capacity Limit (see page 34) If you set the maximum value, you can limit the recording capacity. Automatic Backup (see page 26) This software starts backing up images at the set time. *1 Audio supported cameras are BB-HCM311A, etc. See Panasonic Network Camera support website at http://panasonic.net/pcc/products/ netwkcam/ for details.
Operating Instructions 3 System Requirements for your PC Your PC (Personal Computer) and network must meet the following technical specifications for this software to work properly. Notes The information above is based on 640 x 480 resolution, favor clarity, motion detection recording, recording interval: Not Specify, recording capacity limited settings to decide your PC specification. The information may change depending on the system or composition. Change the hard disk capacity considering file size shown on page 23. Trademarks Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Adobe and Adobe Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. Screen shots reprinted with permission from Microsoft Corporation. All other trademarks identified herein are the property of their respective owners.Items Description Operating SystemMicrosoft ® Windows® XP Professional Edition Microsoft® Windows® 2000 (Service Pack 2 or later) Web BrowserInternet Explorer 6.0 or later File SystemNTFS (NT File System) is recommended. Audio *1 *1Using the camera with audio. Audio output feature (Speaker or Headphones) Hardware SpecificationConnecting 10 Cameras Connecting 4 Cameras CPU: Pentium ® 4 3 GHz or higher, or compatible processor Memory: 512 MB or higherCPU: Pentium 4 1.8 GHz or higher, or compatible processor Memory: 256 MB or higher
Operating Instructions 4 Table of Contents 1 Product Introduction ..................................................... 6 1.1 Included Accessories ..................................................................... 6 1.2 Important Information..................................................................... 7 1.2.1 Audio and Video Recording Notice ............................................................ 7 1.2.2 Security Cautions ...................................................................................... 7 1.3 End-User License Agreement ........................................................ 8 1.4 Looking at Installation Procedure................................................. 11 1.5 Installing This Software ................................................................ 12 1.5.1 Modifying or Deleting This Software........................................................ 18 1.6 Starting or Closing This Software ................................................ 19 1.6.1 Starting This Software ............................................................................. 19 1.6.2 Closing This Software .............................................................................. 20 1.7 Performing License Registration .................................................. 21 1.7.1 Registering a New License ...................................................................... 21 2 Software Operation ..................................................... 23 2.1 Selecting a Folder to Save Images .............................................. 23 2.2 Automatically Backing up Recorded Images................................ 26 2.3 Using a Proxy Server ................................................................... 28 2.4 Registering the Camera ............................................................... 30 2.4.1 Creating New Camera ............................................................................. 30 2.4.2 Editing Camera Information ..................................................................... 38 2.5 Network Camera Recorder Window ............................................ 39 2.5.1 Monitoring Page....................................................................................... 45 2.5.2 Recorded Image Page ............................................................................. 46 2.5.3 Timer List Page ........................................................................................ 47 2.6 Monitoring the Camera ................................................................ 48 2.6.1 Monitoring the Camera ............................................................................ 48 2.6.2 Using Operation Bar ................................................................................ 49 2.6.3 Using Preset Buttons ............................................................................... 52 2.7 Recording the Image.................................................................... 53 2.7.1 Manually Recording the Image ................................................................ 53 2.7.2 Motion Detection Recording .................................................................... 55 2.7.3 Timer Recording ...................................................................................... 56 2.8 Playing the Recorded Images ...................................................... 59 2.8.1 Playing the Recorded Images.................................................................. 59 2.8.2 Searching the Recorded Images ............................................................. 63
Operating Instructions 5 2.9 Using Camera List........................................................................ 66 2.10 Enabling or Disabling the Cameras.............................................. 68 2.11 Deleting the Registered Cameras ................................................ 69 2.12 Converting the Recorded Images ................................................ 70 2.12.1 Converting the Recorded Images to JPEG files ...................................... 70 2.13 Other Features ............................................................................. 72 2.13.1 Importing the Camera Information........................................................... 72 2.13.2 Exporting the Camera Information .......................................................... 72 2.13.3 Copying the Recorded Images ................................................................ 73 2.13.4 Changing the Keyword of the Recorded Images ..................................... 73 2.13.5 Deleting the Recorded Images ................................................................ 74 2.14 Error Message List ....................................................................... 75 2.15 Troubleshooting ............................................................................ 93 2.16 Default Setting List ....................................................................... 96 Index ....................................................................................98
Operating Instructions 6 1 Product Introduction 1.1 Included Accessories The following items are provided. Note User registration requires registration code shown on registration code stickers. Affix the stickers to the case, the front or the back of Operating. Instructions to remember registration code and license key. CD-ROM Notice Do not scratch, smudge, write or label either CD-ROM surfaces. It may become unreadable because of a scratch. Do not touch the CD-ROM surface and avoid leaving fingerprints on it. It may become unreadable because of dust. Do not place the CD-ROM in any place where it will be subjected to direct sun- light or high temperature such as around a heater. CD-ROM may become unreadable because of change in shape. Do not throw or bend CD-ROM. CD-ROM may become unreadable because of a scratch or change in shape. Do not play this CD-ROM in an audio CD player. Ear-splitting volume may damage its speakers. CD-ROM ...................................................... Operating Instructions (This Manual) ........... Registration code stickers ............................. End-User License Agreement ......................1 pc. 1 pc. 1 set (3 pcs.) 1 pc.
Operating Instructions 7 1.2 Important Information 1.2.1 Audio and Video Recording Notice PLEASE NOTE that under certain circumstances, audio/video recording may be PROHIBITED by law. This software should be used only in compliance with all applicable federal, state and local statutes. 1.2.2 Security Cautions When using this software, take appropriate measures to avoid the following security breaches. Leaks of private information via this software Illegal use of this software by a third party Interference or suspension of the use of this product by a third party Take the following measures to avoid security breaches: To prevent malicious attack to your PC or recorded images, keep newly updating the installed software on your PC such as operating system, web browser, antivirus software or Network Camera Recorder. (Perform the version update to intensify the security). If you receive data from the Internet, perform the scan for malicious program or removal of the computer virus. You are responsible for this product’s user information such as registered camera information and recorded images. This information should not be made available to any third parties outside the user group. Panasonic Communications Co., Ltd.
Operating Instructions 8 1.3 End-User License Agreement THIS IS A LEGAL AGREEMENT BETWEEN YOU AND PANASONIC COMMUNICATIONS CO., LTD. (PANASONIC) WITH RESPECT TO THE PANASONIC NETWORK CAMERA RECORDER, RETAIL VERSION SOFTWARE (SOFTWARE). CAREFULLY READ ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT PRIOR TO INSTALLING THE SOFTWARE. THE SOFTWARE INCLUDES A PROGRAM LICENSED UNDER THE GNU LESSER GENERAL PUBLIC LICENSE (LGPL PROGRAM). AS FOR LGPL PROGRAM, GNU LESSER GENERAL PUBLIC LICENSE SET FORTH IN THE FILE COPYING UNDER THE DIRECTORY NAMED SOURCE WHICH CAN BE FOUND IN THIS PROGRAM SHALL BE APPLIED. INSTALLING THE SOFTWARE INDICATES YOUR ACCEPTANCE OF THESE TERMS AND CONDITIONS. If you do not agree to these terms and conditions, return all SOFTWARE items (disk, written materials and packaging) to the place of purchase, for a refund. No refund will be given unless all SOFTWARE items (disk, written materials and packaging) are returned. 1.COPYRIGHT: The SOFTWARE is protected by copyright laws and international treaty provisions, and all other applicable laws. You acknowledge that you are receiving only a LIMITED LICENSE TO USE the SOFTWARE and related documentation, and that you shall obtain no title, ownership nor any other rights in or to the SOFTWARE and its related documentation, all of which title and rights shall remain with PANASONIC or its licensor. 2.LICENSE: 3.RESTRICTIONS: You may not reverse engineer, decompile or disassemble the SOFTWARE, except as expressly permitted by applicable laws or GNU Lesser General Public License. You may not use, copy, modify, alter, rent, lease or transfer the SOFTWARE, its related documentation, or any copies thereof, in whole or in part, except as (1)You may use the SOFTWARE solely for the purpose of recording and processing images from one or more PANASONIC Network Cameras which are compatible with the SOFTWARE. (2)You may make a copy of the SOFTWARE for the use defined in subparagraph (1) above, or for internal back-up purpose only. (3)You may transfer your rights under this License Agreement on a permanent basis, provided that you transfer this Agreement, all copies of the SOFTWARE, all related documentation and your PANASONIC Network Camera(s), and the recipient thereof agrees to the terms of this Agreement.
Operating Instructions 9 expressly provided in this Agreement. You may not export the SOFTWARE in contravention of any applicable U.S. or foreign export laws and regulations. 4.TERM: This license is effective until terminated. You may terminate this Agreement at any time by destroying the SOFTWARE and related documentation and all copies thereof. This license will be terminated if you fail to comply with any term or condition of this Agreement. Upon such termination, you agree to destroy the SOFTWARE, all copies thereof and related documentation. 5.LIMITED WARRANTY: PANASONIC warrants to you that the SOFTWARE will perform substantially in accordance with its documentation for the ninety (90) day period following your receipt of the SOFTWARE. To make a warranty claim, you must return the SOFTWARE to the location where you obtained it along with proof of purchase within such ninety (90) day period. If the SOFTWARE does not perform substantially in accordance with its documentation, the entire liability of PANASONIC and your exclusive remedy shall be limited to either, at PANASONICS option, the replacement of the SOFTWARE or the refund of the license fee you paid for the SOFTWARE. THE FOREGOING STATES THE SOLE AND EXCLUSIVE REMEDIES FOR PANASONICS BREACH OF WARRANTY. THE LIMITED WARRANTY SET FORTH IN THIS PARAGRAPH GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR JURISDICTION TO JURISDICTION. 6.LIMITATION OF LIABILITY: EXCEPT FOR THE LIMITED WARRANTY SET FORTH IN PARAGRAPH 5, PANASONIC MAKES NO WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, AS TO ANY OTHER MATTERS, INCLUDING BUT NOT LIMITED TO NON- INFRINGEMENT OF THIRD PARTY RIGHTS, MERCHANTABILITY, OR FITNESS FOR ANY PARTICULAR PURPOSE. PANASONIC DOES NOT AND CANNOT WARRANT THE PERFORMANCE OR RESULTS YOU MAY OBTAIN BY USING THE SOFTWARE. SOME STATES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY MAY LAST, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. TO THE EXTENT PERMISSIBLE, ANY IMPLIED WARRANTIES ARE LIMITED TO NINETY (90) DAYS. IN NO EVENT WILL PANASONIC BE LIABLE TO YOU FOR ANY CONSEQUENTIAL, INDIRECT, INCIDENTAL, PUNITIVE OR SPECIAL DAMAGES, INCLUDING ANY LOST PROFITS OR LOST SAVINGS, EVEN IF A REPRESENTATIVE OF PANASONIC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY THIRD PARTY. SOME STATES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
Operating Instructions 10 7.U.S. GOVERNMENT RESTRICTED RIGHTS LEGEND: The SOFTWARE and related documentation are commercial item, as that is defined at FAR 2.101, consisting of commercial computer software and commercial computer software documentation, as such terms are used in FAR 12.212 and DFARS 227.7202. Consistent with FAR 12.212 or DFARS 227.7202, as applicable, the Software and related documentation are licensed to U.S. Government end users as a commercial item, with only those rights as are granted to all other end users pursuant to the terms and conditions of this Agreement.