Panasonic Network Camera Recorder BB-HNP11A Operating Instructions

Operating Instructions
61
Notes
 Sometimes Audio may be interrupted, or image may be paused.
 If you monitor the camera with audio feature, audio may be interrupted due 
to your PC performance or network environment. In this case, lower the 
max. bandwidth setting on the Network page of the camera.
 If you minimize the application during playback, playback will be paused, 
and if you change the page to the monitoring, recorded image or timer list 
page, playback will be stopped.
Recorded images can be...

Operating Instructions
62
Speed and volume can be adjusted in the following ways.
Notes
 The changed playback speed is disabled by selecting another camera 
preview or closing this software.
 Audio cannot be adjusted. Audio can be played only at the medium speed 
(default).Adjust the slider bar displayed by 
right-clicking volume button. If the 
camera does not support audio, the 
button is not displayed.
Adjust the slider bar displayed by 
right-clicking playback button. 

Operating Instructions
63
2.8.2 Searching the Recorded Images
You can search images by using recorded time or keyword.
1.Select a camera preview on the camera list.
 Selected camera is displayed in a blue frame (see page 66).
2.Select [Edit] [Search] on the menu bar.
 Clicking [Search] tab displays the search page.
 The search page is displayed.
Double-clicking  
or clicking   displays the 
search page on another 
window.
Specifies the time period to 
search images (see page 65).
Specifies the day of...

Operating Instructions
64
3.Set search conditions, and click [Search Operation].
 The search result is displayed.
Notes
 If you set the time period, this software search images by the 
condition including the time period.
 Conditions are added like A and B. For example, if you set [Tuesday] 
and [Current Recorded Image], this software searches images 
recorded on Tuesday.
 Clicking   deletes all search results.
 Searched images can be played on the screen (see page 59).
 The images that are being...

Operating Instructions
65
Search Time Period
To specify the search time period, check the box and specify the time period. 
Time period can be set by directly entering date and time or selecting it from the 
calendar.
Entering Date and Time
Selecting Date and Time from Calendar
Note
Second cannot be set in the time period.Directly enter date and time.
If you do not set it, this software search 
images after the set time.
If you click it, the calendar is displayed.
Select the date from the calendar....

Operating Instructions
66
2.9 Using Camera List
The camera list displays registered camera previews.
The selected camera is displayed in a blue frame. 
If you select multiple cameras, select them while pressing [Ctrl] key on the 
keyboard.
The image of the selected camera is displayed 
on the monitoring page.
Indicator
: Monitoring 
(Left: Green)
: Recording 
(Left: Green, Center: Red)
: Motion detection recording 
(Left: Green, Center and Right: 
Red)
: Stand-by state for motion 
detection recording...

Operating Instructions
67
Notes
 Double-clicking   or clicking   displays the camera list on 
another window (see page 39).
 If the camera is not operated for 15 seconds, the indicator of monitoring 
turns off. 

Operating Instructions
68
2.10 Enabling or Disabling the Cameras
You can enable or disable cameras.
1.Select the camera to enable or disable, and select [Enable] or [Disable] on the 
menu bar [Camera] [Enable or Disable Cameras].
 You can enable or disable cameras from the menu displayed by right-
clicking camera list (see page 66).
 You can enable or disable multiple cameras.
 If you select multiple cameras, select cameras while pressing [Ctrl] key on 
the keyboard.
To Disable Cameras
 The following...

Operating Instructions
69
2.11 Deleting the Registered Cameras
You can delete registered cameras.
Note
If you delete cameras, the recorded images are deleted with the cameras. 
If you keep recorded images, disable the cameras (see page 68).
1.Select the camera to delete, and select [Camera] [Delete] on the menu bar.
 You can delete cameras from the menu displayed by right-clicking camera 
list (see page 66).
 You can delete multiple cameras.
 If you select multiple cameras, select cameras while...

Operating Instructions
70
2.12 Converting the Recorded Images
2.12.1 Converting the Recorded Images to JPEG files
1.Select a camera preview on the camera list.
 Selected camera is displayed in a blue frame (see page 66).
2.Select recorded images to convert to JPEG files on the recorded image page.
 The selected recorded image is displayed on the screen.
3.Select [Tools] [JPEG Conversion] on the menu bar.
 You can select [JPEG Conversion] from the menu displayed by right-
clicking the recorded image...