Panasonic Network Camera Recorder BB-HNP11A Operating Instructions

Operating Instructions
31
Basic Settings Page
Setting Description
Camera Name Enter the camera name (mandatory). The camera name is 
displayed on the screen (see page 45).
 Maximum 250 characters.
Comment Enter the information of the camera such as a location. The 
comment is displayed on the screen (see page 45).
 Maximum 128 characters.
Camera Address Enter the IP address (or domain name) (mandatory).
 Enter the alphanumeric characters.
Port Enter the port number.
 When port number is 80 (default),...

Operating Instructions
32
Note
If this software cannot access the camera, the following message is displayed. 
Confirm the camera setting and try again.
Note
The number of connections from software to the camera is limited. 
Up to 3 connections can be established with the camera. User Name/
PasswordIf you set security setting (authentication setting), enter 
administrator user name and password of the camera.
 Enter the alphanumeric characters.
 4 to 15 characters.
 Password is saved in encryption....

Operating Instructions
33
Image Settings Page
 Default is displayed when you register a camera.
 If you can change default by checking [Set to Default] and clicking [OK], the 
current settings become as a default.
 If you click [Return to Default], the settings return to a default.
Note
If the camera disables setting changes, resolution or image quality settings 
may not work properly. Setting Description
Resolution Select 640 x 480, 320 x 240 (default) or 160 x 120.
Image Quality Select Favor...

Operating Instructions
34
Recording Capacity Limit Page
 Default is displayed when you register a camera.
 If you change default by checking [Set to Default] and clicking [OK], the current 
settings become as a default.
 If you click [Return to Default], the settings return to a default.
 If you change the capacity to a smaller value than the current capacity, this 
software deletes old images. (E.g. if you change the capacity to 200 MB when 
you recorded images up to 250 MB, 50 MB old images are...

Operating Instructions
35
Motion Detection Page
E.g. If the recording time overlaps other settings, a continuous image is recorded.
 If you set to record images before or after 5-second period and another motion 
is detected, 1 image is recorded.
 Default is displayed when you register a camera.
 If you can change default by checking [Set to Default] and clicking [OK], the 
current settings become as a default.
 If you click [Return to Default], the settings return to a default.Setting Description...

Operating Instructions
36
Notes
 Clicking   on the toolbar buttons starts recording, and clicking   stops 
recording. If you are clicking   or   while you set recording time period 
before or after the motion detection, motion detection recording does not 
work.
 If you try to capture a exact image when the motion is detected, do not 
check the boxes of before motion detection and after motion detection.
 Motion detection level is changed depending on resolution, image quality, 
object situation and...

Operating Instructions
37
Keyword Page
Setting Description
Keyword 1/
Keyword 2Put a keyword to manually-recorded images.
 2 keywords (keyword 1/keyword 2) can be set.
 If you set a keyword, you can search recorded images by 
it (see page 63). 

Operating Instructions
38
2.4.2 Editing Camera Information
1.Select [Camera] [Edit Current Camera] on the menu bar.
 You can change camera information on the menu displayed by right-
clicking on the camera list (see page 66).
 The change camera information page is displayed.
2.Set the parameters and click [OK].
 See page 31 to page 37 for details about parameters. 

Operating Instructions
39
2.5 Network Camera Recorder Window
Window Display
The camera list and operation bar can be displayed on another window, or change 
the layout.
E.g. Displaying the operation bar on another window
Page Selection tab
Monitoring Image: Displays the current image (see page 45).
Recorded Image: Displays the recorded image list and playback image (see page 
46).
Timer List: Displays the timer list (see page 47).
Camera List
(see page 66)Menu Bar
(see page 42)
Toolbar Buttons
(see page...

Operating Instructions
40
E.g. Changing the layout moving the operation bar
Note
If you move the window while pressing [Ctrl] on the keyboard, the window is 
located as an independent window.
You can move the location by dragging.
The window is embedded by dragging on the page.