Panasonic Network Camera Recorder BB-HNP11A Operating Instructions

Operating Instructions
91
Recording has stopped because 
either there is insufficient free disk 
space or the disk cannot be written 
on.
Confirm that there is sufficient free 
space on the save destination disk 
and that the save destination 
folder is in a writable condition, 
then try recording again. The destination free space has reached the 
limit set on the preferences page, or the save 
destination folder is not writable and recording 
is stopped.
1.Decrease the save destination free 
space....

Operating Instructions
92
Backup failed.  Folder creation error occurs during backup.
Confirm that the backup destination folder 
is writable. If same error message appears 
after trying again, restart your PC.  Message Cause and Remedy 

Operating Instructions
93
2.15 Troubleshooting
Problem Cause and Remedy
The camera image 
is not displayed. The camera is not powered up.
Turn the camera on.
 The camera IP address is incorrect.
Set the proper IP address at the basic settings on the 
camera registration information page.
 The authentication is required for the camera.
Set the proper user name and password at the basic 
settings on the camera registration page.
 Network to which your PC is connected is not working.
Confirm that the...

Operating Instructions
94
Timer recording is 
not working. The day of the week is not checked at the day of the week 
setting on the timer page.
Check the day of the week to enable timer recording.
 Timer is disabled. (Timer is grayed out on the timer list.)
Select the timer on the timer list, and click [Enable] on the 
menu displayed by right-clicking the timer list.
You cannot pan or 
tilt the camera. Pan/tilt operation is not permitted on the camera settings.
Permit the pan/tilt operation.
 The...

Operating Instructions
95
You cannot change 
resolution or image 
quality. Resolution or image quality control is not permitted on the 
camera settings. Problem Cause and Remedy 

Operating Instructions
96
2.16 Default Setting List
Items Default
Create New 
Camera/
Camera 
Registration 
InformationBasic 
SettingsCamera Name -
Comment -
Camera Address -
Por t -
User Name -
Password -
Use a proxy server -
Image 
SettingsResolution 320 x 240
Image Quality Standard
Recorded Frequency Not Specify
Audio Recording Settings Image Only
Recording 
Capacity 
LimitLimit the recording 
capacity.-
Motion 
DetectionBefore motion is detected: -
After motion is detected: 5 seconds
Keyword Keyword...

Operating Instructions
97
Recorded 
ImagesSearch Time Period Setting -
Weekly Setting -
Search Keyword -
Searched Target Current Recorded 
Image
Recorded Status All
Recording Method All
Preferences Destination Destination C:\Program 
Files\Panasonic\NCR2
Maintaining the hard disk 
capacity100 MB
Backup Perform Automatic Backup -
Backup Folder -
Minimum Free Disk Space -
Backup Schedule -
Network 
ConnectionUse a proxy server -
Proxy Address -
Po r t -
Proxy User Name -
Proxy Password - Items Default 

Operating Instructions
98
Index
A
Automatic Backup 26
B
Basic Settings Page 31
C
Camera List 66
CD-ROM Notice
 6
Copy
 73
Creating New Camera
 30
D
Default Setting List 96
E
Editing Camera Information 38
Enabling or Disabling the Cameras
 68
End-User License Agreement
 8
Error Message List
 75
Exporting the Camera Information
 72
F
Focus 51
I
Image Settings Page 33
Importing the Camera Information
 72
Included Accessories
 6
Installation Procedure
 11
Installing This Software
 12
J
JPEG Conversion 70
K...

Operating Instructions
99
Z
Zoom 50 

PSQX3482XC    KK0904RM3118
2004 Panasonic Communications Co., Ltd. All Rights Reserved.
Carefully pack your unit, preferably in the original carton.
Attach a letter, detailing the symptom, to the outside of the carton.
Symptom
Send the unit to an authorized servicenter, prepaid and adequately insured.
Do not send your unit to the Panasonic Consumer Electronics Company listed below or to
executive or regional sales offices. These locations do not repair consumer products.
When you ship the product...