Panasonic Network Camera Management System BB HGW700A Operating Guide

							9 [For assistance, please call: 1-800-272-7033]Installation/Troubleshooting
2.3 Connect This Product
1.Raise the antenna.
2.Connect the modem to this products WAN jack.
3.Connect the PC to this products LAN jack.
4.Insert the AC adaptor cord into the DC IN jack of this product.
5.Insert the AC cord into the AC adaptor socket and the plug into an outlet. (This product will be 
turned on automatically
.)
When using the stand
To the outlet
AC adaptor 
(included) AC cord 
(included)
PCModemInternet
1. 2. 3. 4.
5.
Adjust the antenna to 
the vertical positionRaise the antenna.
Align the first groove 
of this product with 
the stand and insert.
1.
2. 
						

							Installation/Troubleshooting
10
2.4 Set Up the PC
Using Windows® XP
It is necessary to log in as the administrator to change the settings on Windows XP.
1.From the Start menu, select My Computer, My 
Network 
Places and then View network 
connections.
2.Right-click the Local Area Connection icon and 
select Properties.
3.Select Internet Protocol (TCP/IP), and click 
[Properties].
4.Click [Advanced...].
5.Check that the Default gateways field is empty, 
and click [OK].
 If an IP address is entered in the field, 
select it and click [Remove].
6.Select Obtain an IP address automatically and 
also select Obtain DNS server address 
automatically, and click [OK].
7.Click [Close] and close the Local Area 
Connection Properties window. 
						

							11 [For assistance, please call: 1-800-272-7033]Installation/Troubleshooting
Using Windows 2000
It is necessary to log in as the administrator to change the settings on Windows 2000.
1.Right-click the My Network Places icon and 
select Properties.
2.Right-click the Local Area Connection icon and 
select Properties.
3.Select Internet Protocol (TCP/IP) and click 
[Properties].
4.Click [Advanced...].
5.Check that the Default gateways field is empty 
and click [OK].
 If an IP address is entered in the field, 
select it and click [Remove].
6.Select Obtain an IP address automatically and 
also select Obtain DNS server address 
automatically, and click [OK].
7.Click [OK] and close the Local Area 
Connection Properties window. 
						

							Installation/Troubleshooting
12
Using Windows Me/98SE
1.From the Start menu, select Settings and click 
Control Panel.
2.Double-click the Network icon.
 If you cannot find the Network icon when 
using Windows Me/98SE, click Display All 
Control Panel Applications.
3.Select a TCP/IP compatible with the LAN card, 
and click [Properties] in the Network dialog 
box.
4.Click the IP Address tab and select Obtain an 
IP address automatically.
5.Click the Gateway tab and check that the 
Installed Gateway field is empty.
 If an IP address is entered in the field, 
select it and click [Remove]. 
						

							13 [For assistance, please call: 1-800-272-7033]Installation/Troubleshooting
6.Click the DNS Configuration tab, select Disable 
DNS, and click [OK].
7.Click [Yes] and restart the PC. 
						

							Installation/Troubleshooting
14
2.5 Register an ISP and Connect to the Internet
1.Start up the web browser.
2.Enter http://bbhgw.webpage:8080 into the 
web browsers address bar (the default port 
number is 8080)
.
The user name and password window is 
displayed.
3.Enter New User Name, New Password, and 
Retype New Password and click [Save].
 The top page is displayed.
Notes
 It is important to always use your user name and password for authentication when using 
this product.
 Access information (user name/password), this products setup information, application 
setup information, logs and other system management information is the responsibility of 
the customer. Access to this information should be limited to users or user groups, and third 
parties should not be allowed to refer to, modify, delete or copy this information. Information 
such as user name, password, setup and management information should be kept 
confidential. 
						

							15 [For assistance, please call: 1-800-272-7033]Installation/Troubleshooting
Notes
 In the default settings, it is possible to display the top page by entering http://192.168.0.254:8080 
into the web browsers address bar.
 When accessing Setup from the top page, an authentication window is displayed (after starting the 
web browser, first time only). Log in by entering your user name and password and clicking [OK].
 In order to view the camera images on the Camera Portal page of this product, it is necessary to 
have completed a connection with a compatible camera (Customer-provided). See the cameras 
Operating Instructions for more details.
.
4.Click Setup.
If the top page is not displayed...
 Confirm that http://bbhgw.webpage:8080 is entered correctly in the address bar (the 
default port number is 8080). If the address is correct and the top page is still not displayed 
enter http://192.168.0.254:8080.
 Confirm that the LAN indicator corresponding to the jack connected to this product is on.
 Confirm that the this products power was turned on before the PCs power was.
 Sometimes it is necessary to set up the web browsers proxy server to access the top page 
(see page 
122 of Operating Instructions on the CD-ROM).
Setup
Camera Portal 
						

							Installation/Troubleshooting
16
Consult with your contracted ISP about which connection type to use, or about your service or contract.
Data Entry Field
*If it is not necessary to enter information into the data entry field, leave it blank.
5.Register an ISP
The ISP registration page allows you to register 
new ISPs for this product, edit them, and delete 
them. Internet connection methods vary according 
to the ISP. Select a connection method referring to 
the ISPs setup information.
Connection TypeDescription
PPPoE (see page 17)
 ISP Name
 User Name/Password
 Service Name
 Access Concentrator Name
 DNS Server 1/DNS Server 2
 Domain Name
It is necessary to enter the following data when using 
PPPoE connection. Enter the user name and 
password referring to the ISPs setup information. 
Enter the service name, access concentrator name 
DNS server 1, DNS server 2, and/or domain name if 
specified by the ISP.
DHCP (see page 19)
 ISP Name
Device Name
Gateway
 DNS Server 1/DNS Server 2
 Domain Name
When the ISP is using a DHCP server, setup entry is 
not essentially necessary. However, sometimes it is 
necessary to enter the device name, gateway, DNS 
server 1, DNS server 2, and/or domain name. Enter 
them referring to your ISPs setup information.
Static (see page 21)
 ISP Name
 IP Address
 Subnet Mask
Gateway
 DNS Server 1/DNS Server 2
 Domain Name
Enter the IP address, subnet mask, gateway, DNS 
server 1, and DNS server 2 specified by the ISP. Enter 
the domain name if specified by the ISP. 
						

							17 [For assistance, please call: 1-800-272-7033]Installation/Troubleshooting
PPPoE Connection
Follow the steps below to set up PPPoE connection.
1.Select [ISP Registration].
2.Click [Register/Edit] on the ISP registration list.
3.Select PPPoE.
Private address 
192.168.0.2
Private address 
192.168.0.1
InternetISP
Modem
The ISP assigns an IP address 
by PPPoE connection. 
						

							Installation/Troubleshooting
18
Notes
 When registering or editing, restart all PCs connected to the LAN (home) side.
 When adding more PCs after setup has been completed, connect the new PCs to jacks 
LAN1 to LAN4 and then restart.
 When instructed by your ISP, change the MTU value. When not instructed, leave it as the 
default (1492). 
4.Enter ISP Name.
 Enter no more than 20 characters. In the 
example right, abcde has been entered.
5.Enter User Name and Password, and if 
specified by the ISP
, enter Service Name, 
Access Concentrator Name, DNS Server 1,
 2, 
and
/or Domain Name.
 See the ISPs setup information. To return 
to the original settings, click [Cancel].
6.When setup is complete, click [Save and Go to 
Connection 
Mode].
 The connection mode page is displayed.
7.Select the ISP entered in step 4.
8.When setup is complete, click [Save].
 The entered information is saved.
Note
When saving, do not cut the power supply. If cut, saving might not be completed successfully.
9.When [Restart] is displayed on the setup page, 
click it
.
10.Restart the PC.
 Check that the PC is connected to the 
Internet.