Panasonic Network Camera Kx Hcm270 Operating Instructions
Here you can view all the pages of manual Panasonic Network Camera Kx Hcm270 Operating Instructions . The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 81
![Page 81
Operating Instructions
[For assistance, please call: 1-800-272-7033] 81
Over write setting:
Selects [Over Write...] to overwrite the transferred image or [Add
time...] to save each transferred image.
Data transfer method:
Use [Passive Mode] normally. If FTP does not work properly, ask your
ISP or network administrator about the transferring mode of FTP
server. [Passive Mode] or [Active Mode] is available.
b.Mail: Sets the SMTP and POP3 server address*1or Host Name*2,
Login ID*2and Password*2.
From...](http://img.usermanuals.tech/thumb/58/66639/w300_kx-hcm270_en_om_d-80.png "Page 81
Operating Instructions
[For assistance, please call: 1-800-272-7033] 81
Over write setting:
Selects [Over Write...] to overwrite the transferred image or [Add
time...] to save each transferred image.
Data transfer method:
Use [Passive Mode] normally. If FTP does not work properly, ask your
ISP or network administrator about the transferring mode of FTP
server. [Passive Mode] or [Active Mode] is available.
b.Mail: Sets the SMTP and POP3 server address*1or Host Name*2,
Login ID*2and Password*2.
From...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 81 Over write setting: Selects [Over Write...] to overwrite the transferred image or [Add time...] to save each transferred image. Data transfer method: Use [Passive Mode] normally. If FTP does not work properly, ask your ISP or network administrator about the transferring mode of FTP server. [Passive Mode] or [Active Mode] is available. b.Mail: Sets the SMTP and POP3 server address*1or Host Name*2, Login ID*2and Password*2. From...
Page 82
![Page 82
Operating Instructions
82
3.5.8 Camera Setup
Camera Setup windowsets White Balance and Power Line Frequency. You can
lock the Brightness, Pan/Tilt/Preset and Preset Program features. You can also
select the Pan Range and Tilt Range.
1.Click[Camera Setup]on Setup Page.
2.Select the each parameter in the proper data field. Click[Save]when finished.
The lens moves to the home position you have registered.
Click[Cancel]to quit the current settings. The window returns to Setup
Page without saving the...](http://img.usermanuals.tech/thumb/58/66639/w300_kx-hcm270_en_om_d-81.png "Page 82
Operating Instructions
82
3.5.8 Camera Setup
Camera Setup windowsets White Balance and Power Line Frequency. You can
lock the Brightness, Pan/Tilt/Preset and Preset Program features. You can also
select the Pan Range and Tilt Range.
1.Click[Camera Setup]on Setup Page.
2.Select the each parameter in the proper data field. Click[Save]when finished.
The lens moves to the home position you have registered.
Click[Cancel]to quit the current settings. The window returns to Setup
Page without saving the...")
Operating Instructions 82 3.5.8 Camera Setup Camera Setup windowsets White Balance and Power Line Frequency. You can lock the Brightness, Pan/Tilt/Preset and Preset Program features. You can also select the Pan Range and Tilt Range. 1.Click[Camera Setup]on Setup Page. 2.Select the each parameter in the proper data field. Click[Save]when finished. The lens moves to the home position you have registered. Click[Cancel]to quit the current settings. The window returns to Setup Page without saving the...
Page 83
![Page 83
Operating Instructions
[For assistance, please call: 1-800-272-7033] 83
Instructions for the data fields
WhiteBalance Notes
The wrong White Balance setting will cause Network
Camera to display colors improperly. In most casesAutois
suggested.
WhiteBalanceisalsoregisteredinpresetprogramming.
Power Line
FrequencyIt can select Flicker Correction by power line frequency.
60 Hz (default) 50 Hz
Select 60 Hz in the United States.
Brightness
ControlBrightness Control can be locked....](http://img.usermanuals.tech/thumb/58/66639/w300_kx-hcm270_en_om_d-82.png "Page 83
Operating Instructions
[For assistance, please call: 1-800-272-7033] 83
Instructions for the data fields
WhiteBalance Notes
The wrong White Balance setting will cause Network
Camera to display colors improperly. In most casesAutois
suggested.
WhiteBalanceisalsoregisteredinpresetprogramming.
Power Line
FrequencyIt can select Flicker Correction by power line frequency.
60 Hz (default) 50 Hz
Select 60 Hz in the United States.
Brightness
ControlBrightness Control can be locked....")
Operating Instructions [For assistance, please call: 1-800-272-7033] 83 Instructions for the data fields WhiteBalance Notes The wrong White Balance setting will cause Network Camera to display colors improperly. In most casesAutois suggested. WhiteBalanceisalsoregisteredinpresetprogramming. Power Line FrequencyIt can select Flicker Correction by power line frequency. 60 Hz (default) 50 Hz Select 60 Hz in the United States. Brightness ControlBrightness Control can be locked....
Page 84
![Page 84
Operating Instructions
84
Specifying the Pan/Tilt range
1.Start up the web browser and access the Single Camera screen.
2.Start up another web browser and access Camera Setup window.
3.Align the Single Camera screen and Camera Setup window from side to side.
4.Adjust the Pan operation on the Single Camera screen and select[Current]in
the minimum value data field of the Pan range on Camera Setup window. The
data field refreshes to read the current value of the Pan range.
5.Specify the each home...](http://img.usermanuals.tech/thumb/58/66639/w300_kx-hcm270_en_om_d-83.png "Page 84
Operating Instructions
84
Specifying the Pan/Tilt range
1.Start up the web browser and access the Single Camera screen.
2.Start up another web browser and access Camera Setup window.
3.Align the Single Camera screen and Camera Setup window from side to side.
4.Adjust the Pan operation on the Single Camera screen and select[Current]in
the minimum value data field of the Pan range on Camera Setup window. The
data field refreshes to read the current value of the Pan range.
5.Specify the each home...")
Operating Instructions 84 Specifying the Pan/Tilt range 1.Start up the web browser and access the Single Camera screen. 2.Start up another web browser and access Camera Setup window. 3.Align the Single Camera screen and Camera Setup window from side to side. 4.Adjust the Pan operation on the Single Camera screen and select[Current]in the minimum value data field of the Pan range on Camera Setup window. The data field refreshes to read the current value of the Pan range. 5.Specify the each home...
Page 85
![Page 85
Operating Instructions
[For assistance, please call: 1-800-272-7033] 85
3.5.9 Multi-Camera
Multi-Camera windowenables the setting of Multi-Camera screen. Camera
Name and IP address of each Network Camera must be entered to view the Multi-
Camera screen. Registering IP addresses of the other Network Camera enables
you to view on the Multi-Camera screen. Clicking Camera Name of Network
Camera on the Multi-Camera screen accesses the Single Camera screen to
control the image. First Network Camera is named...](http://img.usermanuals.tech/thumb/58/66639/w300_kx-hcm270_en_om_d-84.png "Page 85
Operating Instructions
[For assistance, please call: 1-800-272-7033] 85
3.5.9 Multi-Camera
Multi-Camera windowenables the setting of Multi-Camera screen. Camera
Name and IP address of each Network Camera must be entered to view the Multi-
Camera screen. Registering IP addresses of the other Network Camera enables
you to view on the Multi-Camera screen. Clicking Camera Name of Network
Camera on the Multi-Camera screen accesses the Single Camera screen to
control the image. First Network Camera is named...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 85 3.5.9 Multi-Camera Multi-Camera windowenables the setting of Multi-Camera screen. Camera Name and IP address of each Network Camera must be entered to view the Multi- Camera screen. Registering IP addresses of the other Network Camera enables you to view on the Multi-Camera screen. Clicking Camera Name of Network Camera on the Multi-Camera screen accesses the Single Camera screen to control the image. First Network Camera is named...
Page 86
![Page 86
Operating Instructions
86
2.Select/Enter the each parameter. Click[Save]when finished.
Click[Cancel]to quit the current settings. The window returns to Setup
Page without saving the parameters.
*
1RefertoIPaddressingonpage108.
*
2Refer to unavailable character set 1 on page 108 but [:] is available.
*
3Refer to unavailable character set 1 on page 108 and refer to displayable
character set on page 109.Instructions for the data fields
Enable check boxThecheckedcameraimagecanbeseenontheMulti-
Camera...](http://img.usermanuals.tech/thumb/58/66639/w300_kx-hcm270_en_om_d-85.png "Page 86
Operating Instructions
86
2.Select/Enter the each parameter. Click[Save]when finished.
Click[Cancel]to quit the current settings. The window returns to Setup
Page without saving the parameters.
*
1RefertoIPaddressingonpage108.
*
2Refer to unavailable character set 1 on page 108 but [:] is available.
*
3Refer to unavailable character set 1 on page 108 and refer to displayable
character set on page 109.Instructions for the data fields
Enable check boxThecheckedcameraimagecanbeseenontheMulti-
Camera...")
Operating Instructions 86 2.Select/Enter the each parameter. Click[Save]when finished. Click[Cancel]to quit the current settings. The window returns to Setup Page without saving the parameters. * 1RefertoIPaddressingonpage108. * 2Refer to unavailable character set 1 on page 108 but [:] is available. * 3Refer to unavailable character set 1 on page 108 and refer to displayable character set on page 109.Instructions for the data fields Enable check boxThecheckedcameraimagecanbeseenontheMulti- Camera...
Page 87
![Page 87
Operating Instructions
[For assistance, please call: 1-800-272-7033] 87
3.5.10 External Output Control
External Output Control windowenables the External Device Control Output
signal to activate the external sensors/devices. (Open or Short to GND) The
network administrator should set up this setting.
Note
Refer to page 106 for Interfacing to the External I/O.
1.Click[External Output Control]on Setup Page.
2.Check[Open]means the External Device Control Output becomes high
impedance (open collector)....](http://img.usermanuals.tech/thumb/58/66639/w300_kx-hcm270_en_om_d-86.png "Page 87
Operating Instructions
[For assistance, please call: 1-800-272-7033] 87
3.5.10 External Output Control
External Output Control windowenables the External Device Control Output
signal to activate the external sensors/devices. (Open or Short to GND) The
network administrator should set up this setting.
Note
Refer to page 106 for Interfacing to the External I/O.
1.Click[External Output Control]on Setup Page.
2.Check[Open]means the External Device Control Output becomes high
impedance (open collector)....")
Operating Instructions [For assistance, please call: 1-800-272-7033] 87 3.5.10 External Output Control External Output Control windowenables the External Device Control Output signal to activate the external sensors/devices. (Open or Short to GND) The network administrator should set up this setting. Note Refer to page 106 for Interfacing to the External I/O. 1.Click[External Output Control]on Setup Page. 2.Check[Open]means the External Device Control Output becomes high impedance (open collector)....
Page 88
![Page 88
Operating Instructions
88
3.5.11 Indicator Control
Indicator Control windowallows you to select Indicator operation. Indicator
operation has three patterns.
Alwayson
Turns on when accessing Network Camera
Alwaysoff
Notes
Indicator can be controlled in case the administrator does not want to
draw attention to Network Camera. This may be desirable when used
for security applications.
Refer to page 14 for the Indicator color indication.
1.Click[Indicator Control]on Setup Page.
2.Select the Indicator...](http://img.usermanuals.tech/thumb/58/66639/w300_kx-hcm270_en_om_d-87.png "Page 88
Operating Instructions
88
3.5.11 Indicator Control
Indicator Control windowallows you to select Indicator operation. Indicator
operation has three patterns.
Alwayson
Turns on when accessing Network Camera
Alwaysoff
Notes
Indicator can be controlled in case the administrator does not want to
draw attention to Network Camera. This may be desirable when used
for security applications.
Refer to page 14 for the Indicator color indication.
1.Click[Indicator Control]on Setup Page.
2.Select the Indicator...")
Operating Instructions 88 3.5.11 Indicator Control Indicator Control windowallows you to select Indicator operation. Indicator operation has three patterns. Alwayson Turns on when accessing Network Camera Alwaysoff Notes Indicator can be controlled in case the administrator does not want to draw attention to Network Camera. This may be desirable when used for security applications. Refer to page 14 for the Indicator color indication. 1.Click[Indicator Control]on Setup Page. 2.Select the Indicator...
Page 89
![Page 89
Operating Instructions
[For assistance, please call: 1-800-272-7033] 89
3.5.12 Status
Status windowdisplays general information about Network Camera.
Note
When some trouble occurs, the information is useful.](http://img.usermanuals.tech/thumb/58/66639/w300_kx-hcm270_en_om_d-88.png "Page 89
Operating Instructions
[For assistance, please call: 1-800-272-7033] 89
3.5.12 Status
Status windowdisplays general information about Network Camera.
Note
When some trouble occurs, the information is useful.")
Operating Instructions [For assistance, please call: 1-800-272-7033] 89 3.5.12 Status Status windowdisplays general information about Network Camera. Note When some trouble occurs, the information is useful.
Page 90
![Page 90
Operating Instructions
90
3.5.13 Restart
Restart windowrestarts Network Camera with the parameters saved. Restarting
is required when the network parameters are changed.
1.Click[Restart]on Setup Page.
2.Click[Restart Now!].
Click[Cancel]to quit. The window returns to Setup Page.](http://img.usermanuals.tech/thumb/58/66639/w300_kx-hcm270_en_om_d-89.png "Page 90
Operating Instructions
90
3.5.13 Restart
Restart windowrestarts Network Camera with the parameters saved. Restarting
is required when the network parameters are changed.
1.Click[Restart]on Setup Page.
2.Click[Restart Now!].
Click[Cancel]to quit. The window returns to Setup Page.")
Operating Instructions 90 3.5.13 Restart Restart windowrestarts Network Camera with the parameters saved. Restarting is required when the network parameters are changed. 1.Click[Restart]on Setup Page. 2.Click[Restart Now!]. Click[Cancel]to quit. The window returns to Setup Page.