Panasonic Network Camera Kx Hcm270 Operating Instructions
Here you can view all the pages of manual Panasonic Network Camera Kx Hcm270 Operating Instructions . The Panasonic manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
Operating Instructions
[For assistance, please call: 1-800-272-7033] 51
Notes
The refresh interval becomes longer as more clients access Network
Camera.
The image resolution, image quality and object situation affect the
number of frames in the Buffered Image.
If internal memory is filled after clicking[Start Capture], the image
buffering will stop automatically.
To save still images on your PC
The PC can save still images taken by JPEG - Regularly Refresh and Buffered
Image. The refresh interval...](http://img.usermanuals.tech/thumb/58/66639/w300_kx-hcm270_en_om_d-50.png "Page 51
Operating Instructions
[For assistance, please call: 1-800-272-7033] 51
Notes
The refresh interval becomes longer as more clients access Network
Camera.
The image resolution, image quality and object situation affect the
number of frames in the Buffered Image.
If internal memory is filled after clicking[Start Capture], the image
buffering will stop automatically.
To save still images on your PC
The PC can save still images taken by JPEG - Regularly Refresh and Buffered
Image. The refresh interval...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 51 Notes The refresh interval becomes longer as more clients access Network Camera. The image resolution, image quality and object situation affect the number of frames in the Buffered Image. If internal memory is filled after clicking[Start Capture], the image buffering will stop automatically. To save still images on your PC The PC can save still images taken by JPEG - Regularly Refresh and Buffered Image. The refresh interval...
Page 52
Operating Instructions 52 3.4 Multi-Camera Screen Four separate Network Camera images can be displayed in both Motion JPEG and JPEG - Regularly Refresh. The Pan/Tilt operation cannot be operated on the Multi-Camera screen. You can jump to each individual Network Camera by clicking Camera Name. The Single Camera screen has the Pan/Tilt operation, which can reflect on the Multi-Camera screen. Refer to page 85 for how to configure each Network Camera. Notes On the Multi-Camera screen, the maximum image...
Page 53
![Page 53
Operating Instructions
[For assistance, please call: 1-800-272-7033] 53
3.5 Setup Page
Setup Pagecontrols all features of Network Camera. Authentication window
protects the Network Camera security. It enables only administrator to access
Setup Page by entering ID and Password.
Enter http://IP Address (or URL)
:Port No./config.html on the web browser
and press[Enter]. When port number is 80 (default), you do not need to enter port
number. Then Setup Page appears.
Example
Accessing Setup Page using port...](http://img.usermanuals.tech/thumb/58/66639/w300_kx-hcm270_en_om_d-52.png "Page 53
Operating Instructions
[For assistance, please call: 1-800-272-7033] 53
3.5 Setup Page
Setup Pagecontrols all features of Network Camera. Authentication window
protects the Network Camera security. It enables only administrator to access
Setup Page by entering ID and Password.
Enter http://IP Address (or URL)
:Port No./config.html on the web browser
and press[Enter]. When port number is 80 (default), you do not need to enter port
number. Then Setup Page appears.
Example
Accessing Setup Page using port...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 53 3.5 Setup Page Setup Pagecontrols all features of Network Camera. Authentication window protects the Network Camera security. It enables only administrator to access Setup Page by entering ID and Password. Enter http://IP Address (or URL) :Port No./config.html on the web browser and press[Enter]. When port number is 80 (default), you do not need to enter port number. Then Setup Page appears. Example Accessing Setup Page using port...
Page 54
Operating Instructions 54 Setup Page Note Firmware Version number indicated on Setup Page is important for your future supportofNetworkCamera. (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13)(14) (15) (16) Version number
Page 55
![Page 55
Operating Instructions
[For assistance, please call: 1-800-272-7033] 55
Item Description
(1) Go to Top PageLinks to Top Page. You can access Single/Multi-
Camera screen in Motion JPEG/JPEG - Regularly
Refresh. Refer to page 57.
(2) NetworkConfigures the network setting (Wireless network
parameters, Static/DHCP, Default Gateway, Port
Number, DNS, DDNS and Bandwidth). Refer to
page 58.
(3) Name/TimeSetstheCameraNameontheSingleCamera
screen. Date and Time is used in the Alarm/Timer
mode in the Image...](http://img.usermanuals.tech/thumb/58/66639/w300_kx-hcm270_en_om_d-54.png "Page 55
Operating Instructions
[For assistance, please call: 1-800-272-7033] 55
Item Description
(1) Go to Top PageLinks to Top Page. You can access Single/Multi-
Camera screen in Motion JPEG/JPEG - Regularly
Refresh. Refer to page 57.
(2) NetworkConfigures the network setting (Wireless network
parameters, Static/DHCP, Default Gateway, Port
Number, DNS, DDNS and Bandwidth). Refer to
page 58.
(3) Name/TimeSetstheCameraNameontheSingleCamera
screen. Date and Time is used in the Alarm/Timer
mode in the Image...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 55 Item Description (1) Go to Top PageLinks to Top Page. You can access Single/Multi- Camera screen in Motion JPEG/JPEG - Regularly Refresh. Refer to page 57. (2) NetworkConfigures the network setting (Wireless network parameters, Static/DHCP, Default Gateway, Port Number, DNS, DDNS and Bandwidth). Refer to page 58. (3) Name/TimeSetstheCameraNameontheSingleCamera screen. Date and Time is used in the Alarm/Timer mode in the Image...
Page 56
Operating Instructions 56 (9) Multi-CameraThe Multi-Camera screen needs to set up these parameters. Enter the Camera Names and IP addresses of each Network Camera. The Multi- Camera can display up to four images in a window. Refer to page 85. (10) External Output ControlSets the External Device Control Output setting to attach external sensors/devices. (Open or Short to GND) Refer to page 87 and page 106. (11) Indicator ControlSets Indicator operation. Indicator will be turned on in the default. Refer to...
Page 57
![Page 57
Operating Instructions
[For assistance, please call: 1-800-272-7033] 57
3.5.1 GotoTopPage
Click[Go to Top Page]on Setup Page. You can access the Single Camera and
Multi-Camera screen in Motion JPEG/JPEG-Regularly Refresh.
Click the language to change the display.](http://img.usermanuals.tech/thumb/58/66639/w300_kx-hcm270_en_om_d-56.png "Page 57
Operating Instructions
[For assistance, please call: 1-800-272-7033] 57
3.5.1 GotoTopPage
Click[Go to Top Page]on Setup Page. You can access the Single Camera and
Multi-Camera screen in Motion JPEG/JPEG-Regularly Refresh.
Click the language to change the display.")
Operating Instructions [For assistance, please call: 1-800-272-7033] 57 3.5.1 GotoTopPage Click[Go to Top Page]on Setup Page. You can access the Single Camera and Multi-Camera screen in Motion JPEG/JPEG-Regularly Refresh. Click the language to change the display.
Page 58
![Page 58
Operating Instructions
58
3.5.2 Network
Network windowconfigures network parameters. Restart Network Camera to
make the parameters effective.
You can set disable Configuration window from the Setup CD-ROM for the
security by clearing the check.
1.Click[Network]on Setup Page.
Refer to page 32 for wireless network parameters.](http://img.usermanuals.tech/thumb/58/66639/w300_kx-hcm270_en_om_d-57.png "Page 58
Operating Instructions
58
3.5.2 Network
Network windowconfigures network parameters. Restart Network Camera to
make the parameters effective.
You can set disable Configuration window from the Setup CD-ROM for the
security by clearing the check.
1.Click[Network]on Setup Page.
Refer to page 32 for wireless network parameters.")
Operating Instructions 58 3.5.2 Network Network windowconfigures network parameters. Restart Network Camera to make the parameters effective. You can set disable Configuration window from the Setup CD-ROM for the security by clearing the check. 1.Click[Network]on Setup Page. Refer to page 32 for wireless network parameters.
Page 59
![Page 59
Operating Instructions
[For assistance, please call: 1-800-272-7033] 59
2.Enter each parameter in the proper data field. Click[Save]when finished.
Click[Cancel]to quit the current settings. The window returns to Setup
Page without saving the parameters.
3.Click[Restart Now!]to restart to make the changed parameters effective.
Instructions for the data fields
Port No. You can set up the port number of Network Camera.
(Default is 80.)
If you use more than one Network Camera with a
broadband router on...](http://img.usermanuals.tech/thumb/58/66639/w300_kx-hcm270_en_om_d-58.png "Page 59
Operating Instructions
[For assistance, please call: 1-800-272-7033] 59
2.Enter each parameter in the proper data field. Click[Save]when finished.
Click[Cancel]to quit the current settings. The window returns to Setup
Page without saving the parameters.
3.Click[Restart Now!]to restart to make the changed parameters effective.
Instructions for the data fields
Port No. You can set up the port number of Network Camera.
(Default is 80.)
If you use more than one Network Camera with a
broadband router on...")
Operating Instructions [For assistance, please call: 1-800-272-7033] 59 2.Enter each parameter in the proper data field. Click[Save]when finished. Click[Cancel]to quit the current settings. The window returns to Setup Page without saving the parameters. 3.Click[Restart Now!]to restart to make the changed parameters effective. Instructions for the data fields Port No. You can set up the port number of Network Camera. (Default is 80.) If you use more than one Network Camera with a broadband router on...
Page 60
![Page 60
Operating Instructions
60
Static
IPAddress
Subnet Mask Check [Static], when having specified IP address
assigned to Network Camera from your ISP or
administrator. Enter the specified IP address and Subnet
Mask.
If you use Network Camera on the LAN, set up in the
same class as your PC is in.
Refer to page 25 for the class.
Refer to page 108 for the IP addressing.
DHCP
Host Name Check [DHCP] (Dynamic Host Configuration Protocol),
when your ISP uses the DHCP server function which
assigns an IP...](http://img.usermanuals.tech/thumb/58/66639/w300_kx-hcm270_en_om_d-59.png "Page 60
Operating Instructions
60
Static
IPAddress
Subnet Mask Check [Static], when having specified IP address
assigned to Network Camera from your ISP or
administrator. Enter the specified IP address and Subnet
Mask.
If you use Network Camera on the LAN, set up in the
same class as your PC is in.
Refer to page 25 for the class.
Refer to page 108 for the IP addressing.
DHCP
Host Name Check [DHCP] (Dynamic Host Configuration Protocol),
when your ISP uses the DHCP server function which
assigns an IP...")
Operating Instructions 60 Static IPAddress Subnet Mask Check [Static], when having specified IP address assigned to Network Camera from your ISP or administrator. Enter the specified IP address and Subnet Mask. If you use Network Camera on the LAN, set up in the same class as your PC is in. Refer to page 25 for the class. Refer to page 108 for the IP addressing. DHCP Host Name Check [DHCP] (Dynamic Host Configuration Protocol), when your ISP uses the DHCP server function which assigns an IP...