Panasonic Network Camera Kx Hcm270 Operating Instructions

Operating Instructions
[For assistance, please call: 1-800-272-7033] 11
1.1.3 Authentication—System Security Feature
Authentication windowrequires you to enter the administrator/general user ID
and password for security. Password security can prevent unregistered users/
intruders from accessing your image from their web browsers. Authentication
windows are not displayed in the default. Refer to page 64 for setting up
Authentication window, the administrator ID and the password. Refer to page 66
for...

Operating Instructions
12
1.2 Included Accessories
The following items are provided with Network Camera. Additional pieces can be
ordered by calling1-800-332-5368.
Notes
 If any items are missing, contact the dealer immediately.
 The order numbers listed above are subject to change without notice.
 Save the original carton and packing materials for future shipping and
transportation of the unit.
 Refer to page 98 and page 101 for Outdoor Cabling and Mounting.
AC Adaptor— 1 pc.
Order No....

Operating Instructions
[For assistance, please call: 1-800-272-7033] 13
Setup CD-ROM
The setup program simplifies Network Camera installation. Adobe
®Acrobat®
Reader 4.05 or later enables you to see the Operating Instructions on the Setup
CD-ROM. If Adobe Acrobat Reader is not installed on the PC, double-click
ar405eng.exe. Refer to ReadmeEng.txt for the directory and file structure of
the Setup CD-ROM.
Notes
 Do not scratch, smudge, write or label either surfaces of the Setup CD-...

Operating Instructions
14
1.3 Camera Feature Locations
1.3.1 Front View
Indicator
Indicator can be controlled onIndicator Control windowon page 88. Color
indications are shown below.
*
1Orange indicator will continue blinking in the DHCP setting.
*2Refer to page 123 for the red blinking.
Fixed Focus Lens and Pan/Tilt operation
Fixed Focus Lens can move in the Pan/Tilt operation. Operation Bar on the Single
Camera screen can operate the Pan/Tilt. The Pan/Tilt moves the lens 120°
horizontally and 45°...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 15
1.3.2 Rear View
Grounding (Earth) Terminal
Lightning may cause serious damage to Network Camera. It is recommended to
connect the Ground for the protection from the lightning.
1.3.3Bottom View
External I/O
(Refer to
page 106.)
DC INjack
(Refer to
page 20.)
Ethernet port
(RJ-45)
(Refer to
page 20.)
Grounding
(Earth)
Te r m i n a l
Hook for AC
adaptor cord
(Refer to
page 99.)Antenna
(Refer to page 97.)
CLEAR SETTING button
(Refer to...

Operating Instructions
16
Section2
NetworkCameraSetup 

Operating Instructions
[For assistance, please call: 1-800-272-7033] 17
2.1 Installation Procedure
Select the Network Camera configuration type. (Page 18—Page 19)
Connect Network Camera for installation. (Page 20)
Prepare the network parameters for Network Camera. (Page 21—Page 22)
Check the proxy server setting. (Page 26—Page 27)
Set up Network Camera with Setup CD-ROM. (Page 28—Page 31)
Setting up wireless network parameters. (Page 32 — Page 36)
Confirm the Network Camera Access from the Internet....

Operating Instructions
18
2.2 Network Camera Configuration Type
Network Camera can be connected over the LAN/Intranet and the Internet. Select
from the four Network Camera configuration types. Network parameters differ
depending on the Network Camera configuration type.
[Ty p e 1]—LAN/Intranet Connection with an Ethernet
Switching Hub
Network Camera can be installed on the LAN/Intranet.
*
1Network traffic can be improved by using the Ethernet switching hub.
[Ty p e 2]—Internet Connection with aBroadband...

Operating Instructions
[For assistance, please call: 1-800-272-7033] 19
[Ty p e 3 ]—Internet Direct Connection with a Modem
Network Camera can be installed alone without PC on the network. When you set 
up Network Camera in [Typ e 3 ], connect Network Camera temporarily in [Ty p e
1 ], [Ty p e 2 ]or [Ty p e 4 ].
Note 
Some xDSL services use PPPoE. Network Camera does not support PPPoE. 
If the Internet connection requires PPPoE, connect with the broadband router 
supporting PPPoE like [Ty p e 2 ].
[Ty p...

Operating Instructions
20
2.3 How to turn on Network Camera for
Installation
Network Camera is powered up when connecting AC plug to the power outlet.
1.Connect Category 5 straight/cross cable to the Ethernet port of Network
Camera to the hub or PC.
 Connect Ethernet cable first to make Network Camera recognize the wired
communication.
2.Connect the DC plug of the AC adaptor to the DC IN jack and the AC plug of
the AC adaptor to the power outlet to turn on Network Camera. Indicator blinks
and the...