Home
>
Panasonic
>
Security Camera
>
Panasonic Network Camera BL-VT164 Series BL-VP100 Series Operating Instructions
Panasonic Network Camera BL-VT164 Series BL-VP100 Series Operating Instructions
Have a look at the manual Panasonic Network Camera BL-VT164 Series BL-VP100 Series Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 86
[Status]
Select “On” or “Off” to determine whether or not to activate each VMD area.
• On: Activates the respective VMD area.
• Off: Inactivates the respective VMD area.
• Default: Off
[Detection area]
Adjust the size of the VMD area using the slider. The smaller the selected value is, the higher the sensitivity
of VMD area becomes. The current value (1-10) will be displayed on the right of the slider.
• Default: 1
[Detection sensitivity]
Adjust the sensitivity of motion detection in the VMD area...](http://img.usermanuals.tech/thumb/58/75070/w64_bl-vt164_en_om_d-85.png "Page 86
[Status]
Select “On” or “Off” to determine whether or not to activate each VMD area.
• On: Activates the respective VMD area.
• Off: Inactivates the respective VMD area.
• Default: Off
[Detection area]
Adjust the size of the VMD area using the slider. The smaller the selected value is, the higher the sensitivity
of VMD area becomes. The current value (1-10) will be displayed on the right of the slider.
• Default: 1
[Detection sensitivity]
Adjust the sensitivity of motion detection in the VMD area...")
![Page 87
3.Click the [Set] button after completing the settings.
IMPORTANT
•The setting will not be applied unless the [Set] button is clicked.
4. To invalidate the VMD area, click the [Set] button after selecting “Off” for “Status” of the VMD area to be
invalidated.
→ The outline of the invalidated VMD area will turn to a dotted line. When the VMD area is invalidated,
no alarm will occur even when a motion can be recognized in the area.
5. To delete the VMD area, click the [Delete] button corresponding to the...](http://img.usermanuals.tech/thumb/58/75070/w64_bl-vt164_en_om_d-86.png "Page 87
3.Click the [Set] button after completing the settings.
IMPORTANT
•The setting will not be applied unless the [Set] button is clicked.
4. To invalidate the VMD area, click the [Set] button after selecting “Off” for “Status” of the VMD area to be
invalidated.
→ The outline of the invalidated VMD area will turn to a dotted line. When the VMD area is invalidated,
no alarm will occur even when a motion can be recognized in the area.
5. To delete the VMD area, click the [Delete] button corresponding to the...")
![Page 88
[E-mail notification]
Select “On” or “Off” to determine whether or not to provide notification by E-mail according to the settings for
the “Alarm” and “Diag.” checkboxes of “Destination of notification” below.
– When an alarm is detected (“Alarm”)
• Default: Off
[Alarm image attachment]
Select “On” or “Off” to determine whether or not to attach an image to the E-mail to be sent when an alarm is
detected.
• Default: Off
Note
•The settings for “Image capture size” of the “Alarm image” section on the...](http://img.usermanuals.tech/thumb/58/75070/w64_bl-vt164_en_om_d-87.png "Page 88
[E-mail notification]
Select “On” or “Off” to determine whether or not to provide notification by E-mail according to the settings for
the “Alarm” and “Diag.” checkboxes of “Destination of notification” below.
– When an alarm is detected (“Alarm”)
• Default: Off
[Alarm image attachment]
Select “On” or “Off” to determine whether or not to attach an image to the E-mail to be sent when an alarm is
detected.
• Default: Off
Note
•The settings for “Image capture size” of the “Alarm image” section on the...")
![Page 89
The settings relating to Panasonic alarm protocol can be configured in this section.
Panasonic alarm protocol notification[Panasonic alarm protocol]
Select “On” or “Off” to determine whether or not to provide notification by Panasonic alarm protocol according
to the settings for the “Alarm” and “Diag.” checkboxes of “Destination of notification” below.
– When an alarm is detected (“Alarm”)
• Default: Off
Note
•When “On” is selected for “Alarm”, notification of the alarm occurrence will be provided...](http://img.usermanuals.tech/thumb/58/75070/w64_bl-vt164_en_om_d-88.png "Page 89
The settings relating to Panasonic alarm protocol can be configured in this section.
Panasonic alarm protocol notification[Panasonic alarm protocol]
Select “On” or “Off” to determine whether or not to provide notification by Panasonic alarm protocol according
to the settings for the “Alarm” and “Diag.” checkboxes of “Destination of notification” below.
– When an alarm is detected (“Alarm”)
• Default: Off
Note
•When “On” is selected for “Alarm”, notification of the alarm occurrence will be provided...")
![Page 90
•Available range: 0-30
• Default: 2
Destination of notification [Address 1] - [Address 8]
Enter the destination IP address or host name of the Panasonic alarm protocol from the following. Up to 8
destination server addresses can be registered.
• [Alarm ] checkbox: When the checkbox is selected, the Panasonic alarm notification will be provided upon
an alarm occurrence.
• [Destination Server address]: Enter the destination server address or host name.
– Available characters: Alphanumeric characters,...](http://img.usermanuals.tech/thumb/58/75070/w64_bl-vt164_en_om_d-89.png "Page 90
•Available range: 0-30
• Default: 2
Destination of notification [Address 1] - [Address 8]
Enter the destination IP address or host name of the Panasonic alarm protocol from the following. Up to 8
destination server addresses can be registered.
• [Alarm ] checkbox: When the checkbox is selected, the Panasonic alarm notification will be provided upon
an alarm occurrence.
• [Destination Server address]: Enter the destination server address or host name.
– Available characters: Alphanumeric characters,...")
![Page 91
12 Configure the setting relating to the image
recognition [Advanced func.]
The settings relating to the XML notification and the settings relating to the face detection can be configured
on the “Advanced func.” page.
The “Advanced func.” page has 2 tabs; the [XML notification] tab and the [Face detection] tab.
12.1 Configure the settings relating to the XML
notification [XML notification] Click the [XML notification] tab on the “Advanced func.” page.
The settings relating to the XML notification can...](http://img.usermanuals.tech/thumb/58/75070/w64_bl-vt164_en_om_d-90.png "Page 91
12 Configure the setting relating to the image
recognition [Advanced func.]
The settings relating to the XML notification and the settings relating to the face detection can be configured
on the “Advanced func.” page.
The “Advanced func.” page has 2 tabs; the [XML notification] tab and the [Face detection] tab.
12.1 Configure the settings relating to the XML
notification [XML notification] Click the [XML notification] tab on the “Advanced func.” page.
The settings relating to the XML notification can...")
![Page 92
•Default: Off
[Notification data]
Select the type of data notification. Select one of the following.
• Face data
Detection info.(Original)/Detection info.(Advanced)
Default: Detection info.(Original)
[Notification interval]
Select the notification interval.
• Face data
1s/2s/3s/4s/5s/6s/10s/15s/20s/30s/1min
Default: 1s
Note
•When [Notification data] is set to “Detection info.(Original)”, the [Notification interval] can only be set
to “1s” or “2s”.
Destination setting for XML notification [Destination...](http://img.usermanuals.tech/thumb/58/75070/w64_bl-vt164_en_om_d-91.png "Page 92
•Default: Off
[Notification data]
Select the type of data notification. Select one of the following.
• Face data
Detection info.(Original)/Detection info.(Advanced)
Default: Detection info.(Original)
[Notification interval]
Select the notification interval.
• Face data
1s/2s/3s/4s/5s/6s/10s/15s/20s/30s/1min
Default: 1s
Note
•When [Notification data] is set to “Detection info.(Original)”, the [Notification interval] can only be set
to “1s” or “2s”.
Destination setting for XML notification [Destination...")
![Page 93
12.2 Configuration of the settings relating to the face
detection [Face detection] Click the [Face detection] tab on the “Advanced func.” page.
The settings relating to displaying the frame to be used for the face detection and the settings relating to the
face detection information attached to the image can be configured.
IMPORTANT
•The face detection function shall not guarantee the detection of faces in an image. The face detection
accuracy varies with imaging conditions.
Face detection
[Face...](http://img.usermanuals.tech/thumb/58/75070/w64_bl-vt164_en_om_d-92.png "Page 93
12.2 Configuration of the settings relating to the face
detection [Face detection] Click the [Face detection] tab on the “Advanced func.” page.
The settings relating to displaying the frame to be used for the face detection and the settings relating to the
face detection information attached to the image can be configured.
IMPORTANT
•The face detection function shall not guarantee the detection of faces in an image. The face detection
accuracy varies with imaging conditions.
Face detection
[Face...")
![Page 94
13 Configure the settings relating to the
authentication [User mng.]
The settings relating to the authentication such as users and PCs restrictions for accessing the camera with a
PC or cellular phone/mobile terminal can be configured on the “User mng.” page.
The “User mng.” page has 3 tabs; the [User auth.] tab, the [Host auth.] tab and the [System] tab.
13.1 Configure the settings relating to the user
authentication [User auth.] Click the [User auth.] tab on the “User mng.” page. ( ®page 34, page...](http://img.usermanuals.tech/thumb/58/75070/w64_bl-vt164_en_om_d-93.png "Page 94
13 Configure the settings relating to the
authentication [User mng.]
The settings relating to the authentication such as users and PCs restrictions for accessing the camera with a
PC or cellular phone/mobile terminal can be configured on the “User mng.” page.
The “User mng.” page has 3 tabs; the [User auth.] tab, the [Host auth.] tab and the [System] tab.
13.1 Configure the settings relating to the user
authentication [User auth.] Click the [User auth.] tab on the “User mng.” page. ( ®page 34, page...")
![Page 95
Note•When the [Authentication] setting has been changed, close the web browser, and then access the
camera again.
[User name]
Enter a user name.
• Available number of characters: 1 - 32 characters
• Unavailable characters: " & : ; \
• Default: None (blank)
[Password] [Retype password]
Enter a password.
• Available number of characters: 4 - 32 characters
• Unavailable characters: " &
• Default: None (blank)
Note
•When the user name already in use is entered and the [Set] button is clicked,...](http://img.usermanuals.tech/thumb/58/75070/w64_bl-vt164_en_om_d-94.png "Page 95
Note•When the [Authentication] setting has been changed, close the web browser, and then access the
camera again.
[User name]
Enter a user name.
• Available number of characters: 1 - 32 characters
• Unavailable characters: \" & : ; \
• Default: None (blank)
[Password] [Retype password]
Enter a password.
• Available number of characters: 4 - 32 characters
• Unavailable characters: \" &
• Default: None (blank)
Note
•When the user name already in use is entered and the [Set] button is clicked,...")
![Page 96
The restriction settings of PCs (IP address) from accessing the camera can be configured on this page.
[Host auth.]
Select “On” or “Off” to determine whether or not to authenticate the host.
• Default: Off
[IP address]
Enter the IP address of the PC to be allowed to access the camera. Host name cannot be entered for the IP
address.
Note
•When “IP address/subnet mask” is entered, it is possible to restrict PCs in each subnet. For example,
when “192.168.0.1/24” is entered and “2. Camera control” is...](http://img.usermanuals.tech/thumb/58/75070/w64_bl-vt164_en_om_d-95.png "Page 96
The restriction settings of PCs (IP address) from accessing the camera can be configured on this page.
[Host auth.]
Select “On” or “Off” to determine whether or not to authenticate the host.
• Default: Off
[IP address]
Enter the IP address of the PC to be allowed to access the camera. Host name cannot be entered for the IP
address.
Note
•When “IP address/subnet mask” is entered, it is possible to restrict PCs in each subnet. For example,
when “192.168.0.1/24” is entered and “2. Camera control” is...")
12 Configure the setting relating to the image recognition [Advanced func.] The settings relating to the XML notification and the settings relating to the face detection can be configured on the “Advanced func.” page. The “Advanced func.” page has 2 tabs; the [XML notification] tab and the [Face detection] tab. 12.1 Configure the settings relating to the XML notification [XML notification] Click the [XML notification] tab on the “Advanced func.” page. The settings relating to the XML notification can be configured in this section. The XML notification notifies the server of face detection information in XML format. XML notification [XML notification] Select “On” or “Off” to determine whether or not to notify face detection information using XML. Operating Instructions91 12 Configure the setting relating to the image recognition [Advanced func.]
•Default: Off [Notification data] Select the type of data notification. Select one of the following. • Face data Detection info.(Original)/Detection info.(Advanced) Default: Detection info.(Original) [Notification interval] Select the notification interval. • Face data 1s/2s/3s/4s/5s/6s/10s/15s/20s/30s/1min Default: 1s Note •When [Notification data] is set to “Detection info.(Original)”, the [Notification interval] can only be set to “1s” or “2s”. Destination setting for XML notification [Destination address] Configure the IP address or the host name of the destination for XML notification. • Available number of characters: 1 - 128 characters • Available characters: Alphanumeric characters, the period (.), the underscore (_), and the hyphen (-). [Destination port number] Configure the port number settings for XML notification. The following port numbers are unavailable since they are already in use. 20, 21, 23, 25, 42, 53, 67, 68, 69, 110, 123, 161, 162, 443, 995, 10669, 10670 [Destination path name] Configure the settings for the destination directory to be used for the XML notification. • Available characters: Alphanumeric characters, the period (.), the underscore (_), the hyphen (-), the slash (/), and the colon (:). [User name] Enter a user name. • Available number of characters: 0 - 32 characters • Unavailable characters: " & : ; \ • Default: None (blank) [Password] Enter a password. • Available number of characters: 0 - 32 characters • Unavailable characters: " & • Default: None (blank) 92Operating Instructions 12 Configure the setting relating to the image recognition [Advanced func.]
12.2 Configuration of the settings relating to the face detection [Face detection] Click the [Face detection] tab on the “Advanced func.” page. The settings relating to displaying the frame to be used for the face detection and the settings relating to the face detection information attached to the image can be configured. IMPORTANT •The face detection function shall not guarantee the detection of faces in an image. The face detection accuracy varies with imaging conditions. Face detection [Face detection] Determine whether or not to enable the face detection function. • On: Information about the face detection frame will be attached and the test frame will be displayed on the image of this page. • Off: Information about the face detection frame will not be attached. No face detection frame will be displayed on the image of this page. • Default: Off [XML notification] The destination settings of the face detection information can be configured. When clicking “XML notification >>”, the [XML notification] tab will be displayed. ( ®page 91) Operating Instructions93 12 Configure the setting relating to the image recognition [Advanced func.]
13 Configure the settings relating to the authentication [User mng.] The settings relating to the authentication such as users and PCs restrictions for accessing the camera with a PC or cellular phone/mobile terminal can be configured on the “User mng.” page. The “User mng.” page has 3 tabs; the [User auth.] tab, the [Host auth.] tab and the [System] tab. 13.1 Configure the settings relating to the user authentication [User auth.] Click the [User auth.] tab on the “User mng.” page. ( ®page 34, page 35) The settings relating to the authentication of users who can access this camera from the PC or a cellular phone/ mobile terminal can be configured on this page. Up to 18 users can be registered. Note •When user authentication has failed to pass (authentication error) 8 times within 30 seconds using the same IP address (PC), access to the unit will be denied for a while. [User auth.] Select “On” or “Off” to determine whether or not to authenticate the users. • Default: On [Authentication] Set the user authentication method. Digest or Basic: Uses Digest or Basic authentication. Digest: Uses Digest authentication. Basic: Uses Basic authentication. • Default: Digest or Basic 94Operating Instructions 13 Configure the settings relating to the authentication [User mng.]
Note•When the [Authentication] setting has been changed, close the web browser, and then access the camera again. [User name] Enter a user name. • Available number of characters: 1 - 32 characters • Unavailable characters: " & : ; \ • Default: None (blank) [Password] [Retype password] Enter a password. • Available number of characters: 4 - 32 characters • Unavailable characters: " & • Default: None (blank) Note •When the user name already in use is entered and the [Set] button is clicked, the respective user information will be overwritten. [Access level] Select the access level of the user from the following. • 1. Administrator: Allowed all available operations of the camera. • 2. Camera control: Allowed to display images from the camera and to control the camera. The camera setting configuration is unavailable. • 3. Live only : Only displaying live images is available. The camera setting configuration and camera control are unavailable. • Default: 3. Live only [User check] From the pull-down menu of “User check”, the registered user can be selected and the selected user’s information can be checked. The registered user will be displayed with the access level. (Example: admin [1]) To delete the registered user, click the [Delete] button after selecting the user to be deleted. 13.2 Configure the settings relating to the host authentication [Host auth.] Click the [Host auth.] tab on the “User mng.” page. ( ®page 34, page 35) Operating Instructions95 13 Configure the settings relating to the authentication [User mng.]
The restriction settings of PCs (IP address) from accessing the camera can be configured on this page. [Host auth.] Select “On” or “Off” to determine whether or not to authenticate the host. • Default: Off [IP address] Enter the IP address of the PC to be allowed to access the camera. Host name cannot be entered for the IP address. Note •When “IP address/subnet mask” is entered, it is possible to restrict PCs in each subnet. For example, when “192.168.0.1/24” is entered and “2. Camera control” is selected for the access level, the PCs whose IP address is between “192.168.0.1” - “192.168.0.254” can access the camera with the access level “2. Camera control”. • When the IP address already in use is entered and the [Set] button is clicked, the respective host information will be overwritten. [Access level] Select the access level of the host from the following. 1. Administrator/ 2. Camera control/ 3. Live only Refer to page 94 for further information about the access level. • Default: 3. Live only [Host check] From the pull-down menu of “Host check”, the registered host can be selected and the selected host’s IP address can be checked. The registered IP address will be displayed with the access level. (Example: 192.168.0.21 [1]) To delete the registered host, click the [Delete] button after selecting the IP address to be deleted. 13.3 Configure the settings relating to the priority stream [System] Click the [System] tab on the “User mng.” page. ( ®page 34, page 35) 96Operating Instructions 13 Configure the settings relating to the authentication [User mng.]
The description below is the configuration of the priority stream that can transmit images without deteriorating the image quality and refresh interval even when multiple users access concurrently. Priority stream [Activation] Select “On” or “Off” to determine whether or not to use the priority stream. • Default: Off Note •When “On” is selected for “Activation” of “Priority stream ”, number of users who can access the camera may be limited. [Destination IP address(1)] Enter the first destination IP address. [Destination IP address(2)] Enter the second destination IP address. [Stream type] Select either “JPEG”, “H.264(1)” or “H.264(2)”. • JPEG: JPEG images will be transmitted. • H.264(1): H.264(1) images will be transmitted. • H.264(2): H.264(2) images will be transmitted. • Default: JPEG Note •When “Best effort” is selected for “Transmission priority” of “H.264”, bit rate will vary between the maximum and minimum rates while images are being transmitted. [Refresh interval*] Select the refresh interval from the following. This setting is validated only when “JPEG” is selected for “Stream type”. 0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps/ 2fps/ 3fps/ 5fps/ 6fps*/ 10fps*/ 12fps*/ 15fps*/ 30fps* • Default: 1fps Note •When “On” is selected for “H.264 transmission”, the transmission interval may be longer than the set value when any value with an asterisk (*) on the right is selected. Operating Instructions97 13 Configure the settings relating to the authentication [User mng.]
[Image capture size] Select the image capture size from the following. This setting is validated only when “JPEG” is selected for “Stream type”. When “4:3” is selected for “Aspect ratio” : QVGA/ VGA/ 800x600 : QVGA/ VGA When “16:9” is selected for “Aspect ratio” : 320x180/ 640x360/ 1280x720 : 320x180/ 640x360 • Default: 640x360 /VGA 98Operating Instructions 13 Configure the settings relating to the authentication [User mng.]VT164WVT164W VT164VT164 VP104WVP104W VP104VP104 VP101VP101 VT164WVT164W VT164VT164 VP104WVP104W VP104VP104 VP101VP101 VT164WVT164W VT164VT164 VP104WVP104W VP104VP104 VP101VP101
14 Configure the settings of the servers [Server] The settings relating to the E -mail server, the FTP server and the NTP server can be configured on this page. The “Server” page has 3 tabs; the [E-mail] tab, the [FTP] tab and the [NTP] tab. 14.1 Configure the settings relating to the E-mail server [E-mail] Click the [E-mail] tab on the “Server” page. ( ®page 34, page 35) The settings relating to the E-mail server used to send the alarm E-mail can be configured on this page. IMPORTANT •When a terminal that receives E -mails is not compatible with UTF -8 encode, it is impossible to receive alarm E-mails correctly. [SMTP server address] Enter the IP address or the host name of the SMTP server used to send E-mails. • Available number of characters: 1 - 128 characters • Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the hyphen (-). [SMTP port] Enter the port number to which E-mails are sent. • Available port number: 1-65535 • Default: 25 The following port numbers are unavailable since they are already in use. 20, 21, 23, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443, 995, 10669, 10670 [POP server address] When “POP before SMTP” is selected for “Type”, enter the IP address or the host name of the POP server. • Available number of characters: 1 - 128 characters • Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the hyphen (-). Operating Instructions99 14 Configure the settings of the servers [Server]
IMPORTANT•When entering the host name for “SMTP server address” or “POP server address”, it is necessary to configure the DNS settings on the [Network] tab of the “Network” page. ( ®page 104) [Authentication] • Type Select the authentication method to send E-mails from the following. – None: It is not necessary to clear any authentication to send E-mails. – POP before SMTP : It is necessary to first clear the POP server authentication to use the SMTP server to send E-mails. – SMTP: It is necessary to clear the SMTP server authentication to send E-mails. – Default: None Note •When you don ’t know the authentication method to send E -mails, refer to the network administrator. • User name Enter the user name to access the server. – Available number of characters: 0 - 32 characters – Unavailable characters: " & : ; \ • Password Enter the password to access the server. – Available number of characters: 0 - 32 characters – Unavailable characters: " & [Sender’s E-mail address] Enter the E-mail address of a sender. The entered E-mail address will be displayed in the “From” (sender) line of the sent E-mails. • Available number of characters: 3 - 128 characters • Available characters: Alphanumeric characters, the at sign (@), the period (.), the underscore (_), and the hyphen (-). 14.2 Configure the settings relating to the FTP server [FTP] Click the [FTP] tab on the “Server” page. ( ®page 34, page 35) The settings relating to the FTP server used to transmit the alarm images can be configured on this page. 100Operating Instructions 14 Configure the settings of the servers [Server]