Panasonic Network Camera Bl Vp101 Manual

 21 
17. Changes to an optional function of “Face detection outline display” and 
“Advanced func.”  
IMPORTANT 
・Face detection function that could be used before the upgrading can be continuously used even after 
upgrading.  
 
( Operating Instructions Monitor images on a PC - About the “Live” page ) 
*  E xcluding                  ( These models don ’t support this function.)  
 
The function that displays an outline on the faces detected with the Face detection function displayed on the...

 22 
( Operating Instructions Configure the setting relating to the image recognition [Advanced 
func.] - Configure the settings relating to the XML notification [XML notification] ) 
WV-SW396,  WV-SW396 A,  WV- SC386  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
The [XML notification] (which has the Face data function) and [Face detection] tabs on "Advanced func." page 
have been  changed to an optional function.  
The Function expansion software is needed in order use these functions. For further...

 23 
18. Supports SSL Mail Server 
( Operating Instructions Configure the settings of the servers [Server] - Configure the 
settings relating to the E-mail server [E-mail] ) 
* Excluding  WV-SW39 5R, WV- SC385R 
* Excluding  WV-SC384R 
* Excluding  WV-SW355R   
             
 
[SSL] 
Select "On" if you want to use SSL encryption when sending E -mail notifications for alarm occurrences or the 
"Diag." function of SD memory card. When "ON" is selected, because "Authentication...

 24 
19. Addition of “Forcible black & white mode”, ”Forcible Super Dynamic”, 
 ”Forcible WDR” to “Schedule” 
( Operating Instructions Configure the settings relating to the schedules [Schedule] ) 
* Excluding    
 
[Schedule mode] 
The schedule settings for Alarm permission, VMD permission, Body heat sensor permission,  Access 
permission, H.264 recording, Position refresh, 1 -64, 1- 256, Forcible black & white mode, Forcible Super 
Dynamic, and Forcible WDR can be configured on the "Schedule"...

 25 
Note 
・Select “On” for “User auth.” on the [User auth.] tab of “User mng.” page and “Off” for “Host auth.” on the 
“Host auth.” page to validate “Access permission”.
 
・ When selecting “H.264 recording”, select “H.264” for “Recording format” on the [SD memory card] tab and 
select “Schedule” for “Save trigger”.
*3 
・ When using “Forcible black & white mode”, set “Terminal 1” or  “Terminal ” on the “Alarm” tab to a setting 
other than “Black & white input”.  
・When "Forcible Super Dynamic" is...

 26 
20. Addition of [Time past from the date of manufacture] 
( Operating Instructions Maintenance of the camera [Maintenance] - Upgrade the firmware 
[Upgrade] ) 
 
[Time past from the date of manufacture] 
Displays how much time has passed since the date of manufacture.  
 
21. Addition of “Portuguese” in [select language] pull-down menu 
 on the Live page 
( Operating Instructions Monitor images on a PC - About the “Live” page ) 
  “Portuguese”  is added in [select language]  pull-down  menu....

 27 
23. Change initial settings for the “Terminal” settings of “Alarm” 
( Operating Instructions Configure the alarm settings [Alarm] - Configure the settings 
relating to the alarm action [Alarm] )  
[Terminal 1] *1 
Default: Off  
[Terminal ] * 2 
Default: Off  
 
*1 Excluding WV -SF346,  WV-SF342,  WV-SF335,  WV-SP306,  WV-SP305,  WV-SP302  
* 2  WV- SF346,  WV-SF342,  WV-SF335,  WV-SP306,  WV-SP305,  WV-SP302  
 
24. Change the language of E-mail notification for [Diag.] 
( Operating Instructions...

 28 
25．Addition of "High light compensation(HLC)" 
( Operating Instructions Configure the settings relating to images and audio [Image/Audio] - 
Configure the settings relating to images and the preset positions [Image/Position] - 
Configure the settings relating to image quality ("Image adjust" setup menu) )  
( Operating Instructions Configure the settings relating to images and audio [Image/Audio] - 
Configure the settings relating to image adjust, focus, back focus, extra optical...

 29 
Note 
When "On" is selected for "Super Dynamic(SD)" or "Back light compensation (BLC)", this setting is not 
available.  
 
26．Changes the name of ”Direction setting” function 
( Operating Instructions Configure the settings relating to images and audio [Image/Audio] 
- Configure the settings relating to images and the preset positions [Image/Position]  
- Configure the settings relating to direction ("Direction" setup menu) )  
 (E xcluding  SW395,  SW395A , SW395R ,...

 30 
27．Addition of " "Panning 0° direction setting" 
( Operating Instructions Configure the settings relating to images and audio [Image/Audio] 
- Configure the settings relating to images and the preset positions [Image/Position]  
- Configure the settings relating to direction ("Direction" setup menu) )  
 (E xcluding  SW395,  SW395A , SW395R , SC385 , SC385R ) 
 
［"Panning 0° direction setting］ 
Configure the Panning 0° direction setti ng. When the [Set] button is clicked...