Panasonic Network Camera Bl Vp101 Manual

							 21 
17. Changes to an optional function of “Face detection outline display” and 
“Advanced func.”  
IMPORTANT 
・Face detection function that could be used before the upgrading can be continuously used even after 
upgrading.  
 
( Operating Instructions Monitor images on a PC - About the “Live” page ) 
*  E xcluding                  ( These models don ’t support this function.)  
 
The function that displays an outline on the faces detected with the Face detection function displayed on the 
"Live" page has been  changed to an option function.  
( Operating Instructions Configure the setting relating to the image recognition [Advanced 
func.] )   
* E xcluding  WV-SW396, WV -SW396A , WV -SC386,  WJ-GXE100  
 
The Advanced func. menu has been  changed to an optional function. 
The Function expansion software is needed in order use the "Advanc ed func." function. For further 
information, refer to our website ( http://security.panasonic.com/pss/security/kms/
). 
  
						

							 22 
( Operating Instructions Configure the setting relating to the image recognition [Advanced 
func.] - Configure the settings relating to the XML notification [XML notification] ) 
WV-SW396,  WV-SW396 A,  WV- SC386  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
The [XML notification] (which has the Face data function) and [Face detection] tabs on "Advanced func." page 
have been  changed to an optional function.  
The Function expansion software is needed in order use these functions. For further information, refer to our 
website ( http://security.pa nasonic.com/pss/security/kms/
).  
						

							 23 
18. Supports SSL Mail Server 
( Operating Instructions Configure the settings of the servers [Server] - Configure the 
settings relating to the E-mail server [E-mail] ) 
* Excluding  WV-SW39 5R, WV- SC385R 
* Excluding  WV-SC384R 
* Excluding  WV-SW355R   
             
 
[SSL] 
Select "On" if you want to use SSL encryption when sending E -mail notifications for alarm occurrences or the 
"Diag." function of SD memory card. When "ON" is selected, because "Authentication Type" is automatically 
set to "SMTP", the "User name" and "Password" used for authentication must be configured  
Default：Off  
Note 
・SSL supports SMTP over SSL. STARTTLS is not supported  
・ Depending on the SMTP server used, SSL may not be supported.   
						

							 24 
19. Addition of “Forcible black & white mode”, ”Forcible Super Dynamic”, 
 ”Forcible WDR” to “Schedule” 
( Operating Instructions Configure the settings relating to the schedules [Schedule] ) 
* Excluding    
 
[Schedule mode] 
The schedule settings for Alarm permission, VMD permission, Body heat sensor permission,  Access 
permission, H.264 recording, Position refresh, 1 -64, 1- 256, Forcible black & white mode, Forcible Super 
Dynamic, and Forcible WDR can be configured on the "Schedule" page.  
Off: No action will be taken for the respective schedule. 
Alarm permission*1: Alarm input (terminal alarm) will be received during the period of the schedule.  
VMD permission: The video motion detection (VMD) function will be active during the period of the  
schedule.  
Body heat sensor permission*2: The body heat sensor detection will be active during the period of the 
schedule.  
Access permission: Users whose access level is set to 2 and 3 on the [User auth.] tab can access the camera 
only in the period of schedule  
H.264 recording*3: The SD recording will be performed at the designated time in the schedule.  
Position refresh*4: The camera position will be refreshed at the designated time in the schedule.  
1-64*5, 1-256*6: The camera will move to the designated preset position at the designated time in the 
schedule.  
Forcible black & white mode*7: During the period of the schedule, “Day & Night(IR)” will be  executed.  
The IR LED Light lights when “Auto(High)”, “Auto(Mid)”, or “Auto(Low)” is set for “IR LED Light”.*8 
Forcible Super Dynamic*9: During the period of the schedule, “Super Dynamic” will be executed. The “Light 
control mode”  of  “Image adjust” is changed to “Outdoor scene” *10 or  ”ELC(1/30s) ”. *11.   
Forcible WDR*1 2: During the period of the schedule, “Wide dynamic range” will  be executed. The “Light 
control mode”  of  “Image adjust” is changed to “Outdoor scene” *13 or  ”ELC(1/30s) ”. *14. 
Default：Off   
						

							 25 
Note 
・Select “On” for “User auth.” on the [User auth.] tab of “User mng.” page and “Off” for “Host auth.” on the 
“Host auth.” page to validate “Access permission”.
 
・ When selecting “H.264 recording”, select “H.264” for “Recording format” on the [SD memory card] tab and 
select “Schedule” for “Save trigger”.
*3 
・ When using “Forcible black & white mode”, set “Terminal 1” or  “Terminal ” on the “Alarm” tab to a setting 
other than “Black & white input”.  
・When "Forcible Super Dynamic" is selected in the "Schedule" page,  the "Schedule" setting will override the 
"Super Dynamic" settings configured in "Preset position". *1 5 
・ "Forcible Super Dynamic"  is  unavailable  when the “Picture (Camera) mode”  is set to “3 mega pixel [4:3]”  or 
“3 mega pixel [16:9]” . *16 
・When "Forcible W DR" is selected in the "Schedule" page, the "Schedule" setting will override the "Wide 
dynamic range" settings configured in "Preset position".*17 
・ When "Super Dynamic"  or  "Wide dynamic range " is switched to "On" from "Off", or to "Off" from "On", the  
image may be distorted temporarily.  
                                                                                              
*1                                          (excluding  WV-SW314)  
   
*2   BL -VT164, BL- VT164W 
* 3                                           (excluding WV-SW314)  
                                    
*4   
*5   WV- SW395 , WV -SW395 A, WV -SW395 R, WV -SC385,  WV-SC385 R, WV -SC384,  WV-SW175 ,  
WV- SW174W , WV -SW172 , WV- ST165 , WV- ST162 , BL-VT164, BL -VT164W  
* 6   WV- SW396 , WV -SW396A , W V-SC386  
*7   WV- SW316L  model already support  this function . 
* 8               
*9                                                          W V-SW355, WV- SW355R, WV-SW352,   
WV-SW352R  
*10                                 W V-SW355, WV -SW355R, WV -SW352, WV- SW352R 
*11                      
*12                                                  WV- SF346,  WV-SF336,  WV -SF335,  WV-SF342,  
WV-SF332  
*13                         WV- SF346, WV-SF336,  WV -SF335,  WV-SF342,WV- SF332 
*14                          
*15          
*16          
*17                                  
 
 
 
 
 
 
 
 
  
						

							 26 
20. Addition of [Time past from the date of manufacture] 
( Operating Instructions Maintenance of the camera [Maintenance] - Upgrade the firmware 
[Upgrade] ) 
 
[Time past from the date of manufacture] 
Displays how much time has passed since the date of manufacture.  
 
21. Addition of “Portuguese” in [select language] pull-down menu 
 on the Live page 
( Operating Instructions Monitor images on a PC - About the “Live” page ) 
  “Portuguese”  is added in [select language]  pull-down  menu.  
 
 
 
 
 
 
 
22. Addition of “Portuguese” in Language selection 
( Operating Instructions Configure the basic settings of the camera [Basic] - Configure the 
basic settings [Basic] ) 
 
[Language] 
Select the language to initially display when the camera is accessed from the following.  
Auto/English/Japanese/Italian/French/German/Spanish/Chinese/Russian/ Portuguese 
Auto: The language used by the browser is automatically selected. If the language used by the browser is not 
supported by the camera, English is selected. 
Default: Auto  ( P model ),  English ( E model )  
The language displayed on the “Live” page can also be changed except “Auto”.   
						

							 27 
23. Change initial settings for the “Terminal” settings of “Alarm” 
( Operating Instructions Configure the alarm settings [Alarm] - Configure the settings 
relating to the alarm action [Alarm] )  
[Terminal 1] *1 
Default: Off  
[Terminal ] * 2 
Default: Off  
 
*1 Excluding WV -SF346,  WV-SF342,  WV-SF335,  WV-SP306,  WV-SP305,  WV-SP302  
* 2  WV- SF346,  WV-SF342,  WV-SF335,  WV-SP306,  WV-SP305,  WV-SP302  
 
24. Change the language of E-mail notification for [Diag.] 
( Operating Instructions Configure the alarm settings [Alarm] - Configuration of the settings 
relating to the E-mail notification [Notification] ) 
 
Note 
When the language except  "Japanese " is selected for "Language"  in [Basic] tab , E -mail  body  for [Diag.]  is 
displayed in English. When " Japanese" is selected , it is  displayed in Japanese.  
  
						

							 28 
25．Addition of "High light compensation(HLC)" 
( Operating Instructions Configure the settings relating to images and audio [Image/Audio] - 
Configure the settings relating to images and the preset positions [Image/Position] - 
Configure the settings relating to image quality ("Image adjust" setup menu) )  
( Operating Instructions Configure the settings relating to images and audio [Image/Audio] - 
Configure the settings relating to image adjust, focus, back focus, extra optical zoom, 
privacy zone, VIQS, and lens distortion compensation [Image quality] - Configure the 
settings relating to image quality ("Image adjust" setup menu) )  
 
 
［High light compensation(HLC)］ 
Select "On" or "Off" to determine whether or not to activate the high light compensation function. 
When the high light compensation function is activated, if there are bright lights (such as those from car  
headlights) at night, blown out highlights of subjects can be limited.  
On: Activates the high light compensation function. 
Off: Deactivates the high light compensation functio n. 
Default: Off   
［Level］ 
Adjust the HLC level.  
The level of HLC will increase when the cursor is moved in the "+" direction, and decrease when  
the cursor is moved in the " -" direction. Click the [Reset] button to reset to the default setting.  
Default: 16  
						

							 29 
Note 
When "On" is selected for "Super Dynamic(SD)" or "Back light compensation (BLC)", this setting is not 
available.  
 
26．Changes the name of ”Direction setting” function 
( Operating Instructions Configure the settings relating to images and audio [Image/Audio] 
- Configure the settings relating to images and the preset positions [Image/Position]  
- Configure the settings relating to direction ("Direction" setup menu) )  
 (E xcluding  SW395,  SW395A , SW395R , SC385 , SC385R )  
 
The name of [Direction setting] has been changed t o [Direction/Angle setting]. 
The [Setup>>] button has been changed to be active regardless of the state of the "Camera position display" 
setting ([Cam. Function] tag on the "Camera" page). However, the "North point setting" function is only 
available when "Direction display" is selected for the "Camera position display" setting.  
 
 
 
 
 
 
 
 
  
						

							 30 
27．Addition of " "Panning 0° direction setting" 
( Operating Instructions Configure the settings relating to images and audio [Image/Audio] 
- Configure the settings relating to images and the preset positions [Image/Position]  
- Configure the settings relating to direction ("Direction" setup menu) )  
 (E xcluding  SW395,  SW395A , SW395R , SC385 , SC385R ) 
 
［"Panning 0° direction setting］ 
Configure the Panning 0° direction setti ng. When the [Set] button is clicked after adjusting the angle of view  
with the control pad/buttons, the current direction of the pan becomes 0°. Click the [Reset] button to reset the 
setting to the default.  
 
Note 
・ The tilt 0°angle is not configured.  
・ Even  if the Panning 0° direction is changed, there is no change to the preset positions already configured.  
  The range of the auto pan setting and the actions of the patrol setting already configured are also not  
  changed.  
・ Thumbnail images displayed before and after changing the Panning 0° direction for the 360 map- shot 
  function are changed.