Panasonic Network Camera Bl Vp101 Manual

 1 
             New functions and addendum                    
 
･ This document contains descriptions of how to set the new functions and their restrictions.   
It is recommended  to read them while referring to the Operating Instructions provided with this product 
together.  
･  The model number is abbreviated in some descriptions in this manual.  
･  Depending on the model used, the screens shown in the explanations may differ to the actual camera 
screens . 
 
About notations 
The following...

 2 
Due to software upgrade, the following functions have been added and changed to this product. 
･Firmware Ver.1.80 
No. Functions Item (Page) Page 
1 Changes the name of “List” on the “Live” page  Log (Live) 4 
2  Changes about “Time zone” and “Summer time”  Basic
 ( Basic ) NTP (Server) 4  
3 Addition of “Auto” in Language selection Basic (Basic) 5 
4 Addition of “Monitor out”(NTSC/PAL switching) setting  Basic (Basic) 5 
5 Addition of “Internet” function Internet (Basic) 6 
6  Addition of “Area”...

 3 
･Firmware Ver.2.00 
No. Functions Item (Page) Page 
25 Addition of "High light compensation(HLC)" Image quality(Image/Audio) 
Image/Position(Image/Audio) 28 
26 Changes the name of “Direction setting” function Image/Position(Image/Audio) 29 
27 Addition of ""Panning 0°direction setting" Image/Position(Image/Audio) 30 
28 Addition of “Audio output duration” setting Audio(Image/Audio) 31 
29 Addition of “Alarm deactivation time” setting Alarm (Alarm) 32 
30 Addition of pre alarm to...

 4 
1. Changes the name of “List” on the “Live” page 
( Operating Instructions  Monitor images on a PC - About the “Live” page, Display the log 
list ) 
 
 
On the "Live" page, the [List] button will be changed to the [List/Play] button. 
 
2. Changes about “Time zone” and “Summer time” 
( Operating Instructions Configure the basic settings of the camera [Basic] - Configure the 
basic settings [Basic], Configure the settings of the servers [Server] - Configure the settings 
relating to the NTP...

 5 
■ Change the default setting of “Start time & date” and “End time & date” of “Summer time 
(daylight saving)” 
[Start time & date] [End time & date] 
When “Auto” is selected for “Summer time (daylight saving)”, select the time & date for the start time and the 
date time (month, week, day of the week, time). 
Default:  
- [Start time & date]：None (blank)  ( P model ) , 03 Last Sun 1 AM  ( E model ) 
- [End time & date]：None (blank)  ( P model ) , 10 Last Sun 1 AM  ( E model )  
 
3. Addition of...

 6 
5. Addition of “Internet” function 
( Operating Instructions Configure the basic settings of the camera [Basic] )  
*                   models already support this function. 
Functions have been added so that Internet settings can be easily performed.  
Click the [Internet] tab of the “Basic” page. The settings relating to UPnP (Auto port forwarding), DDNS 
(Viewnetcam.com), and network settings for the Internet can be configured on this page.   
 
[UPnP (Auto port forwarding)] 
Select “On” or “Off”...

 7 
By selecting "MIEMASUNET-PRO"  or "Viewnetcam.com” and clicking the [Set] button, the registration 
window will be displayed in a newly opened window.  
Follow the on- screen instructions to register.  Refer to the website ( http://www.viewnetcam.com/
 , 
http://panasonic.biz/miemasu/pro/)  for further information.   
Note 
•When the "DDNS" setting is changed, the "DDNS" setting on the [DDNS] tab of the "Network" page also 
changes to the same setting....

 8 
*3  When "4:3" (excluding           ) or "4:3 (V GA)" (        ) is selected for "Aspect ratio", "QVGA" is used. 
When "16:9" is selected for "Aspect ratio", "320x180" is used. ( Excluding          and          .)  
When "1.3 mega pixel (VGA) [4:3]" or "3 mega pixel [4:3]" is selected for "Image capture mo de", "QVGA" is 
used. When "1.3 mega pixel [16:9]" or "3 mega pixel [16:9]" is selected for...

 9 
Off: Does not use the DDNS function. 
Viewnetcam.com: Uses the “Viewnetcam.com” service.  
MIEMASUNET-PRO: Uses the “MIEMASUNET-PRO ” service. 
Miemasu.net: Uses the “Mie masu.net”  service. 
Dynamic DNS Update: Uses Dynamic DNS Update (RFC2136 compliant) without the DHCP cooperation.  
Dynamic DNS Update(DHCP): Uses Dynamic DNS Update (RFC2136 compliant) with the DHCP 
c ooperation.  
Default: Off  
By selectin g "MIEMASUNET -PRO ", "Mie masu. net" or "Viewnetcam.com” and...

 10 
8. Addition of “Initial display stream on the browser” setting 
( Operating Instructions Configure the settings relating to images and audio [Image/Audio] ) 
 
[Initial display stream on the browser] 
“Initial display stream on the browser” of  [JPEG/H.264] tab  on the “Image/Audio”  page has been added. 
Configure what type of images is  initially displayed on the “Live” page.  
For models that support MPEG -4, when "MPEG -4" is selected for "Video encoding format", the setting...