Panasonic Network Camera BB-HCM403A Getting Started Manual

							Operating Instructions
73
2.11 Adjusting Audio
The Audio page allows you to set the microphone, the external speaker, 
microphone sensitivity and external speaker volume settings.
1.Click [Audio] on the Setup page.
2.Set each parameter.
 Clicking [Cancel] cancels your settings without saving changes.
Setting Description
Output  You can control audio output for the external speaker 
connected to the camera.
Volume  You can control the external speaker output volume.
PC Audio Input 
Timeout  You can set the time to consecutively perceive the 
audio from your PC. (1 [default]—60 minutes)
Input  You can control audio input from the external 
microphone connected to the camera.
Camera 
Microphone 
Sensitivity You can select the microphone sensitivity level.
Minimum: Decreased sensitivity
Standard: Standard setting (default)
Maximum: Enhanced sensitivity 
						

							Operating Instructions
74
3.Click [Save] when finished.
 The new settings are saved.
 When finished, Success! is displayed.
4.Click [Go to Audio page].
 The Audio page is displayed. 
						

							Operating Instructions
75
3 Registering Users
3.1 Changing the Authentication Setting and 
Administrator User Name and Password
The Security: Administrator page allows you to change authentication, and the 
administrators user name and password. An authentication window allows 
registered users to access the camera.
Note
 If you access the camera for the first time, the window for setting the 
administrators user name and password is displayed. Make a note of the user 
name and password so that you will not forget them.
 The user name and password should be secured at your own responsibility. 
Pay attention to the following points.
– Set a user name and password with as many characters as possible.
– Change the password regularly.
 Setting [Permit access from guest users] (permitting access without a User 
Name or Password) or [Permit access from guest users (mobile only)] 
(permitting access without a User Name or Password) at General 
Authentication risks the images being viewed by third parties. Control the 
contents of the images accordingly.
IMPORTANT
 It is important to limit access to the camera by use of a unique User Name and 
a secret Password. Because the camera is accessed through the Internet it is 
possible that the camera could be accessed by unknown individuals, including 
those who are commonly known as hackers, to whom you do not want to allow 
access. The use of a unique User Name and a Password known only to you will 
help insure that only authorized individuals are given access to the camera. You 
have the option of proceeding without a User Name and Password, but it is 
strongly recommended that you utilize these protections. 
						

							Operating Instructions
76
1.Click [Administrator] on the Setup page.
2.Set each parameter.
 Clicking [Cancel] cancels your settings without saving changes.
Setting Description
General 
AuthenticationAuthentication has 3 phases.
 If you set [Permit access from guest users], the camera 
does not display the authentication window in camera 
access. All guest users can view images without a user 
name and password.
 If you set [Permit access from guest users (mobile only)], 
an authentication window is not displayed when accessing 
the cell phone page. All guest users can view images 
without a user name and password when accessing the 
cell phone page.
Note
 If you set [Permit access from guest users], [Login] 
is displayed at the top of the page. After you log in 
as an administrator (see page 79), the Setup page 
and the Maintenance page can be accessed.
 If you set [Do not permit access from guest users], an 
authentication window is displayed to access the camera. 
Users must enter the user name and password. 
						

							Operating Instructions
77
Note
 When setting authentication, set the user name and password, and save 
them.
 When users other than an administrator are accessing the camera, the 
[Setup] and [Maintenance] tabs will not be displayed.
 The user name and password are case sensitive.
3.Click [Save] when finished.
 The new settings are saved.
 When finished, Success! is displayed.
4.Click [Go to Security: Administrator page].
 The Security: Administrator page is displayed.
Note
 When the user name and password have been changed, the camera 
displays an authentication window. Enter the user name and password, 
and click [OK]. User Name/
Password User Name (6 to 15 characters): Enter the user name.
 Password (6 to 15 characters): Enter the password.
Note
 The password must be different from the user name.
 Retype Password: Reenter the password.
 Enter ASCII characters (see page 176). Note that [Space], 
[], [], [&], [] and [:] are not available. Setting Description 
						

							Operating Instructions
78
Administrator/General Users/Guest Users
The access level to the camera is divided to administrator, general users and guest 
users.
Note
 Guest users mean unregistered users. Set [Permit access from guest 
users] or [Permit access from guest users (mobile only)] on the Security: 
Administrator page (see page 75) to allow access from guest users. Items Administrator General 
UsersGuest Users Guest Users 
(mobile only)
User Name 
and PasswordRequired Required Not Required Not Required
Number of 
Users150——
Accessible 
PagesAll Pages Pages Except 
For Setup and 
Maintenance 
pagePages Except 
For Setup and 
Maintenance 
pageCell phone 
page only
Access Level All Operations Access level 
can be set for 
each general 
user (see 
page 80).Access level 
can be set for 
guest users 
(see page 80).— 
						

							Operating Instructions
79
3.2 Logging in to the Camera
If you set [Permit access from guest users] on the Security: Administrator page, 
[Login] is displayed at the top of the page. After you log in as an administrator, the 
Setup page and the Maintenance page can be accessed.
1.Click [Login] at the top of the page.
2.Check a login mode, and click [Login].
Note
 The authentication window is displayed. Enter the user name and 
password set for General Users or Administrator.
3.Enter a valid user name and password according to the Login mode selected 
in step 2, and click [OK] to log in to the camera. 
						

							Operating Instructions
80
3.3 Creating, Modifying or Deleting General 
Users
The General User page allows you to create, modify or delete general users. Up to 
50 general users can be registered. The access level is set for each general user. 
If you set [Permit access from guest users] or [Permit access from guest users 
(mobile only)] on the Security: Administrator page, the access level can be set for 
guest users.
Note
 For general users, the Setup and Maintenance tabs are not displayed.
1.Click [General Users] on the Setup page.
2.To create a general user, click [Create].
 When setting [Do not permit 
access from guest users] When setting [Permit access 
from guest users] or [Permit 
access from guest users 
(mobile only)]
 To change the settings of general users or guest users, select their 
name and click [Modify]. The modification page is displayed.
 To delete a general user, select the name and click [Delete]. The 
confirmation page is displayed. 
						

							Operating Instructions
81
3.Set each parameter.
 Settings for general users  Settings for guest users
 Clicking [Cancel] takes you back to the previous page without 
saving changes.
Setting Description
User ID List  Up to 50 general users can be registered.
 The list is used to modify or delete general user settings.
User Name/
Password User Name (6 to 15 characters): Enter the user name.
 Password (6 to 15 characters): Enter the password.
Note
 The password must be different from the user name.
 Retype Password: Reenter the password.
 Enter ASCII characters (see page 176). Note that 
[Space], [], [], [&], [] and [:] are not available. 
						

							Operating Instructions
82
4.Click [Save] when finished.
 The new settings are saved.
 When finished, Success! is displayed.
5.Click [Go to General User page].
 The General User page is displayed.Setting Description
Access Level An access level is set for each general user. Check each 
feature to enable access to it.
 In the limit time of continuous Motion JPEG setting, set the 
time for changing video (Motion JPEG) to still images for 
each user. (Not permitted, Unlimited, 10 seconds—60 
minutes) In the refresh interval setting, set the refresh 
interval after the video has changed to still images. (3—60 
seconds)
 See the corresponding page for details of the following 
features.
Brightness Control (see page 23)
External Output Control (see page 23)
Change Refresh Interval (see page 23)
Change Resolution (see page 23)
Change Quality (see page 23)
Capture Image Button (see page 22)
Listen (see page 25)
Talk (see page 25)
View Multi-Camera page (see page 27)
View Buffered Image page (see page 29)