Panasonic Network Camera BB-HCM381A BB-HCE481A Getting Started Manual

Operating Instructions
123
8.Select the transfer method, and click [Next>].
 Clicking [

Operating Instructions
124
When you set [FTP] for Transfer Method
Select [FTP], and click [Next>]. The following page is displayed.
 Clicking [

Operating Instructions
125
Overwrite 
Setting Selecting [Overwrite File] overwrites the image on the server 
with a newer image. Selecting [Save as New File with Time 
Stamp] saves the image attaching time stamps on the file 
name, and the images are not overwritten.
E.g. image20050101093020500
.jpg
The underlined numbers mean 9h30min20s500ms on 
January 1, 2005. The letter s is inserted after the day when 
referring to a daylight saving time zone.
Data 
Tr a n s f e r  
Method Select [Passive Mode]...

Operating Instructions
126
When you set [E-mail] for Transfer Method
Select [E-mail], and click [Next>]. The following page is displayed.
 Clicking [

Operating Instructions
127
Setting Description
SMTP Server IP 
Address or Host 
Name
*1
 If you set a server IP address, set 4 numbers (0—255) and 
3 periods such as 192.168.0.253. Note that 0.0.0.0 and 
255.255.255.255 are not available. Or set a host name 
(1—255 characters).
 You can set an IPv6 address.
Port No.  Enter the number (1—65535). Usually set to 25.
Reply E-mail 
Address
*2 Set the senders E-mail address. We recommend you to 
set the administrators E-mail address.
Destination E-
mail...

Operating Instructions
128
How to 
authenticateThe authentication method can be selected: 
[No authentication], [POP before SMTP authentication] or 
[SMTP authentication].
POP server authentication may be required by your ISP. In 
that case, set POP before SMTP authentication.
 No authentication: No authentication when sending an e-
mail.
 POP before SMTP authentication: Some SMTP servers 
that send e-mails do not have an authentication feature. 
Therefore, the camera uses the authentication of a POP...

Operating Instructions
129
9.After you confirm the settings and click [Next>], set E-mail notification and 
click [Next>].
 If you select [Enable], the E-mail Notification When Triggered page is 
displayed. Enter the settings referring to page 127–128.
10.Click [Save] after confirming the settings.
 The new settings are saved.
 When finished, Success! is displayed.
11.Click [Go to Trigger page].
 The Trigger page is displayed.
Note
 If you set a short interval when transferring images to a cell...

Operating Instructions
130
 If you are buffering images to the internal memory, the following operations also 
delete all buffered images.
– Turning off or restarting the camera.
– Updating the camera.
– Resetting the camera to default.
– Saving the Date and Time page. 

Operating Instructions
131
4.5 Transferring Camera Images in Transport 
Mode
The camera can transfer images in transport mode by E-mail or FTP.
Prepare the following required items:
See page 60 and set up the E-mail or FTP server.Item Supported Feature
E-mail or FTP 
ServerOperating 
System: IPsec supported
ISP Service : A service for multiple static global 
addresses (A global address must be set 
up to the server.)
Camera ISP Service : A service for multiple static global 
addresses (A global address...

Operating Instructions
132
4.6 Transferring Camera Images in Tunnel Mode
The camera can transfer images in tunnel mode by E-mail or FTP.
Prepare the following required items:
See page 63 and set up the E-mail or FTP server.Item Supported Feature
VPN Router ISP Service 
(in IPv4): A service for static global addresses (A 
global address must be set up to the WAN 
side.)
ISP Service 
(in IPv6): An IPv4/IPv6 Dual-Stack or IPv6 over 
IPv4 Tunneling service
Camera ISP Service 
(in IPv4): A service for...