Panasonic Network Camera BB-HCM381A BB-HCE481A Getting Started Manual

Operating Instructions
113
Overwrite 
Setting Selecting [Overwrite File] overwrites the image on the server 
with a newer image. Selecting [Save as New File with Time 
Stamp] saves the image attaching time stamps on the file 
name, and the images are not overwritten.
E.g. image20050101093020500
.jpg
The underlined numbers mean “9h30min20s500ms on 
January 1, 2005”. The letter “s” is inserted after the day when 
referring to a daylight saving time zone.
Data 
Tr a n s f e r  
Method Select [Passive...

Operating Instructions
114
When you set [E-mail] for Transfer Method
Select [E-mail], and click [Next>]. The following page is displayed.
 Clicking [

Operating Instructions
115
Setting Description
SMTP Server IP 
Address or Host 
Name
*1
 If you set a server IP address, set 4 numbers (0—255) and 
3 periods such as 192.168.0.253. Note that 0.0.0.0 and 
255.255.255.255 are not available. Or set a host name 
(1—255 characters).
 You can set an IPv6 address.
Port No.  Enter the number (1—65535). Usually set to 25.
Reply E-mail 
Address
*2 Set the senders E-mail address. We recommend you to 
set the administrators E-mail address.
Destination E-
mail...

Operating Instructions
116
How to 
authenticateThe authentication method can be selected: 
[No authentication], [POP before SMTP authentication] or 
[SMTP authentication].
POP server authentication may be required by your ISP. In 
that case, set POP before SMTP authentication.
 No authentication: No authentication when sending an e-
mail.
 POP before SMTP authentication: Some SMTP servers 
that send e-mails do not have an authentication feature. 
Therefore, the camera uses the authentication of a POP...

Operating Instructions
117
9.After you confirm the settings and click [Next>], set E-mail notification and 
click [Next>].
 If you select [Enable], the E-mail Notification When Triggered page is 
displayed. Enter the settings referring to page 115—116. 
10.Click [Save] after confirming the settings.
 The new settings are saved.
 When finished, Success! is displayed.
11.Click [Go to Trigger page].
 The Trigger page is displayed.
Note
 If you set a short interval when transferring images to a cell...

Operating Instructions
118
 If you are buffering images to the internal memory, the following operations also 
delete all buffered images.
– Turning off or restarting the camera.
– Updating the camera.
– Resetting the camera to default.
– Saving the Date and Time page. 

Operating Instructions
119
4.4 Buffering or Transferring Images by Motion 
Detection Signal
Camera has a Motion Detection feature that detects movement, such as people, 
based on the preset threshold and sensitivity of Camera. You can buffer the 
camera images, transfer to an FTP server or send E-mails using the Motion 
Detection function as a trigger.
The Trigger page allows you to enable image buffer/transfer by E-mail or FTP.
Note
 The level of motion detection depends on resolution, image quality,...

Operating Instructions
120
 Click [Save] to save the settings.
 Clicking [Cancel] takes you back to the Trigger page without saving 
changes.
Note
 If you click [Save], all buffered images on the SD memory card are 
deleted.
4.Set the time, and click [Next>].
 Clicking [

Operating Instructions
121
5.Set the image settings, and click [Next>]. 
 Clicking [].
 Clicking [

Operating Instructions
122
7.Set the image buffer frequency, and click [Next>].
fif
 Clicking [