Panasonic Monitoring System BL-MS103 Operating Instructions

							16
3.Connect the camera to the power outlet.
4.Wait while the Quick Setup utility restarts the camera, then configures and 
registers the camera.
• When the camera has been configured and registered, "Finished" is 
displayed next to the camera name ("CAM1") and the buzzer sounds.
5.To register another camera, connect the camera to one of the LAN jacks of 
the BL-WV10A or the BB-HGW700A, then turn the camera on by connecting 
it to the power outlet.
6.When you have finished registering all cameras, set the BL-WV10A's mode 
switch to [NORMAL], disconnect the DC cord from the rear of the unit, 
reconnect the DC cord, then continue from “Viewing Camera Images” on 
page 17. If images can be viewed from all cameras, disconnect devices as 
necessary and place them where you plan to use them. 
						

							17
Adding More Cameras to the System
Up to 8 cameras can be registered to the BL-WV10A. If you purchase additional 
cameras later, you can register them by setting the mode switch of the BL-WV10A 
to [SETUP], then turning the unit off and on again. The Quick Setup utility will 
begin, and you can then follow the same procedure used to register your existing 
cameras.
Viewing Camera Images
To start up the BL-WV10A to view camera images, make sure the mode switch on 
the rear of the unit is set to [NORMAL] and turn on the BL-WV10A. The startup 
screen will appear. If the [Date and Time] screen appears, set the date and time, 
then press [ENTER]. The camera image should then appear.
While camera images, you can aim 
the camera by panning and tilting the 
lens using the navigator keys. 
Pressing [DISPLAY] repeatedly 
displays different camera and image 
information.
Pressing [ENTER] aims the camera at 
the camera's Home Position.
Pressing buttons [1]-[4] aims the 
camera at one of the Preset Positions. 
You can change the 4 preset positions 
and register 4 additional Preset 
Positions (5-8) as well.
For more information, see “Viewing 
Camera Images” on page 54 of the 
Operating Instructions.
[DISPLAY]
[ENTER] Navigator keys 
						

							18
If the Camera Image Does Not Appear
If the image from a camera that you registered using Quick Setup does not appear, 
confirm that the camera is turned on and that the Ethernet cable is connected to 
the camera correctly. If the camera is a BL-C30A being used in wired mode, make 
sure the camera's switch is set to [WIRED].
If the camera is a BL-C30A being used wirelessly, make sure the camera's switch 
is set to [WIRELESS]. If the wireless signal from a wireless camera is too weak, 
motion images may become disrupted. Confirm the strength of the signal by 
pressing [DISPLAY] while viewing the camera.
Refer to the information on page 3 and relocate the camera if the signal is too 
weak.
Strongest signal Weakest signal No signal 
						

							19
Entering Characters with the Remote Control
Characters (letters, numbers, and symbols) can be entered using the remote 
control when setting camera names, user names and passwords, etc.
Use the navigator keys to select the 
desired character, then press [ENTER] 
to copy the text to the text field in the 
upper-left part of the screen.
You can erase characters, beginning with 
the last entered character, by pressing 
[1]. When you have finished, press 
[STOP] to use the entered characters. 
You will return to the previous screen 
automatically. 
						

							Using the Included Stand
Insert the BL-WV10A into the included stand to use the unit in an upright position.
Trademarks
• SD mark is a trademark of the SD Card Association.
• QuickTime and the QuickTime logo are trademarks of Apple 
Computer, Inc.
• All other trademarks identified herein are the property of their respective 
owners.
1.Raise the antenna.
2.Align the first and last slot as shown 
an insert the BL-WV10A into the 
stand.Antenna
First slot
KK0505CH0PSQX3750ZAPrinted in Japan
2005Panasonic Communications Co., Ltd. All Rights Reserved.
Copyright:This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced 
for internal use only. All other reproduction, in whole or in part, is prohibited without the written 
consent of Panasonic Communications Co., Ltd.