Panasonic Monitoring System BL-MS103 Operating Instructions

							180
A
AC Power Frequency 109
Address
Port 115
Admin Password 100
Admin User Name
100
Alarm Volume 98
Auto Return 110
B
Battery Safety 6
BL-WV10A
Default Settings List 135
Specifications 136
Brightness 124
Buzzer
Stopping 69
Turning off 69
C
Camera Compatibility 4
Camera List 63
Changing Order
119
Camera Name 109
,115
Camera Settings 100
Local Cameras
109
Remote Cameras 114
Camera Setup 108
Cameras
Adding 132
Display Options 122
,123,124
Erasing
118
Initializing 113
Registering Manually 105
Restarting
113
Connecting Cameras
Directly to the BL-WV10A 23
Using a Router
42
Using an Optional BB-HGW700A 31
Continuous Sensor Recording 81
D
Date and Time 96
DC IN Jack
12
E
Encryption 102
Encryption Key
102
Entering Characters 121
Error Messages 140
F
FACTORY DEFAULT RESET Button 131
FCC and Other Information 7
FTP Password
104
FTP User Name 104
G
General Setup 97
I
Image Quality 110,115
IMPORTANT SAFETY INSTRUCTIONS
5
Indicators 13
Alert
12
LAN 12
Power 12
Sensor
12
Timer/Busy 12
Wireless 12
IPsec
4
L
LAN ports 12
Local vs. Remote Cameras
Re-registering a Remote Camera as 
a Local Camera 53 
						

							[For assistance, please call: 1-800-272-7033] 181
M
MAC Address Filtering 102
Menu Screen
56
Mode Switch 12
,139
Movies
Display Options 125
Erasing 91
Playback Controls 89
Playing
88
Selecting 88
Show Frames 90
Viewing Information
90
Multi-Camera Screen 64
N
Network Settings 99
P
Panning/Tilting 57
Password
107
,116
Password Save 107
,116
Pictures
Display Options 126
Erasing 93
Playback Controls 93
Slide Show
93
Viewing 92
Positions
Home Position 59
Preset Positions 59
Sensor Position 59
Privacy Button
111
Privacy Mode 111
Proxy Server 107
,115
Q
Quick Setup
Using a BB-HGW700A 35
Using a Router 47
Using the BL-WV10A only 26
R
Record Mode 83
Recorder
71
Recording
Display Options 127
Snapshots (Pictures)
75
Standard Recording 75
Recording Capacity 74
Recording Images
71
Refresh Rate 110
,115
Remote Control 15
Programming
18
Sensor 12
Remote vs. Local Cameras 22
S
Scan Control 124
SD Card Info 120
SD Memory Card
Format 120
SD Memory Card port 12
SD Memory Cards
72
Security 98
Security Code 98
Sensor
117
Sensor Alert Mode 66
Sensor Indicator
Turning off 69
Sensor Notification Screen 68
Sensor Settings 104
,117
Sequential Display Mode (SEQ. DISP.)
139
Setup Menu 95
Snapshot Recording
75
Specifications 136
SSID 101
Starting Address
100
Status 113
Status Settings 105 
						

							182
T
Tilting/Panning 57
Timer Recording
76
Trigger Type 77
,81
Troubleshooting 148
U
User Name 107,116
V
Video output port 12
Viewing Camera Images 54
W
White Balance 110
Wireless
Channel 102
Communications
6
Format 101
Mode 101
Settings
101 
						

							[For assistance, please call: 1-800-272-7033] 183 
						

							KK0505CH0PSQX3749ZB
Panasonic Consumer Electronics Company, 
Division of Panasonic Corporation of North America
Printed in Japan
2005Panasonic Communications Co., Ltd. All Rights Reserved.
Panasonic Puerto Rico, Inc.
Carefully pack your unit, preferably in the original carton.
Attach a letter, detailing the symptom, to the outside of the carton.
Symptom
The information in this document is subject to change without notice.
Send the unit to an authorized servicenter, prepaid and adequately insur\
ed.
Do not send your unit to the Panasonic Consumer Electronics Company list\
ed below or
to executive or regional sales offices. These locations do not repair co\
nsumer products.
When you ship the product
Panasonic Servicenters are listed in the servicenter directory.
Call 1-800-272-7033 for the location of an authorized servicenter.
This product is designed for use in the United States of America.
Sale or use of this product in other countries/areas may violate local l\
aws.
For product service
Copyright:This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced 
for internal use only. All other reproduction, in whole or in part, is prohibited without the written 
consent of Panasonic Communications Co., Ltd. 
						

							This guide will help you install and configure the BL-WV10A Wireless Camera 
Monitoring System and your Network Cameras (sold separately).
Included Items
Confirm that the following items are included in the product box.
Additional pieces can be ordered by calling 1-800-332-5368.
BL-WV10A AC adaptor AC cord Ethernet cable
Part no. 
PQLV202Y
Cord length: 3 m 
(10 ft.)Par t no. 
PSJA1069Z
Length: 1.8 m
(5 ft. 11 in.)Part no. 
PQJA10138Z
(Cat. 5 straight 
cable)
Length: 1 m
(3 ft. 3 in.)
Video cable Stand Remote control Batteries (2 AA 
size)
Part no. 
PSJP01R02Z
Length: 1.5 m
(5 ft.)Part no. 
PSYLWV10NPar t no. 
PSWEWV10APar t no.
R6DW/2ST
• Setup Guide (this manual)
• Operating Instructions
•Warranty
Setup Guide
Wireless Camera
Monitoring System
Model No.BL-WV10A 
						

							2
IMPORTANT SAFETY INSTRUCTIONS
When using this product, basic safety precautions should always be followed to 
reduce the risk of fire, electric shock, or personal injury.
1.Read and understand all instructions.
2.Keep these instructions.
3.Heed all warnings.
4.Follow all instructions.
5.Do not install this product near any heat sources such as radiators, heat 
registers, stoves, or other apparatus (including amplifiers) that produce heat.
6.Protect the AC adaptor cord and AC cord from being walked on or pinched 
particularly at plugs, convenience receptacles, and the point where they exit 
from this product.
7.The AC cord is used as the main disconnect device. Ensure that the AC outlet 
is located/installed near the product and is easily accessible.
8.Use only the included Panasonic AC adaptor and AC cord.
9.The AC adaptor must remain connected at all times. (It is normal for the 
adaptor to feel warm during use.)
10.To prevent the risk of fire or electrical shock, do not expose this product to rain 
or any type of moisture.
11.Do not touch the product or the AC adaptor and AC cord during lightning 
storms.
12.Unplug this product when unused for a long period of time.
13.Refer all servicing to qualified service personnel. Servicing is required when 
the unit has been damaged in any way, such as when the AC adaptor, AC cord 
or plug is damaged, the unit does not operate normally, or after the unit has 
been dropped.
14.Certain Network Cameras are intended for indoor use only. Never use an 
indoor camera outdoors.
15.Unplug this unit from power outlets if it emits smoke, an abnormal smell or 
makes unusual noise. These conditions can cause fire or electric shock. 
Confirm that smoke has stopped and contact an authorized service center.
SAVE THESE INSTRUCTIONS 
						

							3
Notice Regarding Battery Safety
1.Do not open or mutilate the batteries. Released electrolyte from the batteries 
is corrosive and may cause burns or injury to the eyes or skin. The electrolyte 
may be toxic if swallowed. If electrolyte comes in contact with the eyes, flush 
eyes with water.
2.Do not mix old and new batteries.
3.Do not heat or expose to flame.
4.Do not take apart or short circuit.
5.Do not attempt to recharge alkaline or manganese batteries.
6.Remove if the remote control is not going to be used for a period of time. Store 
in a cool, dark place.
7.Use only non-rechargeable AA batteries. When replacing the batteries, we 
recommend using the same type of Panasonic batteries that are included with 
this product.
Notice Regarding Wireless Communications
1.To avoid wireless communication interference and instability, do not use this 
product near the following devices.
• Wireless transmitters (radio transmitters, cellular transmitters, etc.)
• Wireless devices which operate at 2.4 GHz (security equipment, POS 
systems, cordless telephones, etc.)
•Microwave ovens
2.Wireless communication range and quality may be affected if the following 
types of objects are located between or near this product and other wireless 
devices connected to this product. In the event that images do not refresh at 
a regular rate, become cut off, etc., relocate this product, the other wireless 
devices, or the obstacles (if possible) for more stable wireless 
communications.
• Metal door shutters
• Walls made of concrete, stone, or brick, or walls which contain aluminium-
based heat insulation
• Multiple walls
• Fire doors and glass
• Steel racks or shelves
3.Place cameras and this product at least 2 m (6.5 ft.) away from radios. Do not 
connect cameras and this product to a power outlet used by a radio. 
						

							4
Recommended Accessories (sold separately)
Compatible router:
• Panasonic BB-HGW700A Network Camera Management System 
Compatible Network Cameras:
• Panasonic BL-C10A, BL-C30A (firmware version 1.22 or higher)
• HCM series (firmware version 1.08 or higher, however, some features 
cannot be used; see “Camera Compatibility” on page 4 of the Operating 
Instructions for more information on compatibility).
• Note that the following HCM series cameras are not supported by the BL-
WV10A:
-KX-HCM8
-KX-HCM10
-KX-HCM230
-KX-HCM250
-KX-HCM270
-KX-HCM280
For the latest firmware, visit http://panasonic.co.jp/pcc/products/en/netwkcam/
Setup Overview
1.Insert the batteries in the remote control.
2.Connect the BL-WV10A to the power outlet and to the TV.
3.Use the BL-WV10A's Basic Setup utility to configure the BL-WV10A.
4.Connect the cameras (and an optional BB-HGW700A Network Camera 
Management System, if you are using one).
5.Use the BL-WV10A's Quick Setup utility to configure the cameras.
6.Confirm that camera images are viewable on the TV.
7.Place the cameras where you plan to use them. 
						

							5
Preparing the Remote Control
The remote control included with the BL-WV10A is required for most operations.
Insert the included batteries as shown below.
Using the Remote Control
The remote control’s navigator 
keys are used to navigate 
through the BL-WV10A’s on-
screen menus and to select on-
screen items. The [RETURN] 
button is used to return to the 
previous menu. The [ENTER] 
button is used to select a menu 
item or parameter.
When using the remote control 
with the BL-WV10A, make sure 
you aim the remote control 
toward the unit’s remote control 
sensor.
Insert the batteries,
positioning the     and
    poles as indicated.While pulling the cover
toward you, lift it up.Align the cover and 
press down until it 
snaps into place.
[RETURN] Navigator 
keys
[ENTER]
Remote control sensor