Panasonic Monitoring System BL-MS103 Operating Instructions
Here you can view all the pages of manual Panasonic Monitoring System BL-MS103 Operating Instructions. The Panasonic manuals for Security system are available online for free. You can easily download all the documents as PDF.
Page 201
16
3.Connect the camera to the power outlet.
4.Wait while the Quick Setup utility restarts the camera, then configures and
registers the camera.
• When the camera has been configured and registered, "Finished" is
displayed next to the camera name ("CAM1") and the buzzer sounds.
5.To register another camera, connect the camera to one of the LAN jacks of
the BL-WV10A or the BB-HGW700A, then turn the camera on by connecting
it to the power outlet.
6.When you have finished registering all...
Page 202
![Page 202
17
Adding More Cameras to the System
Up to 8 cameras can be registered to the BL-WV10A. If you purchase additional
cameras later, you can register them by setting the mode switch of the BL-WV10A
to [SETUP], then turning the unit off and on again. The Quick Setup utility will
begin, and you can then follow the same procedure used to register your existing
cameras.
Viewing Camera Images
To start up the BL-WV10A to view camera images, make sure the mode switch on
the rear of the unit is set to [NORMAL]...](http://img.usermanuals.tech/thumb/58/75071/w300_bl-wv10a_en_om_d-201.png "Page 202
17
Adding More Cameras to the System
Up to 8 cameras can be registered to the BL-WV10A. If you purchase additional
cameras later, you can register them by setting the mode switch of the BL-WV10A
to [SETUP], then turning the unit off and on again. The Quick Setup utility will
begin, and you can then follow the same procedure used to register your existing
cameras.
Viewing Camera Images
To start up the BL-WV10A to view camera images, make sure the mode switch on
the rear of the unit is set to [NORMAL]...")
17 Adding More Cameras to the System Up to 8 cameras can be registered to the BL-WV10A. If you purchase additional cameras later, you can register them by setting the mode switch of the BL-WV10A to [SETUP], then turning the unit off and on again. The Quick Setup utility will begin, and you can then follow the same procedure used to register your existing cameras. Viewing Camera Images To start up the BL-WV10A to view camera images, make sure the mode switch on the rear of the unit is set to [NORMAL]...
Page 203
![Page 203
18
If the Camera Image Does Not Appear
If the image from a camera that you registered using Quick Setup does not appear,
confirm that the camera is turned on and that the Ethernet cable is connected to
the camera correctly. If the camera is a BL-C30A being used in wired mode, make
sure the camera's switch is set to [WIRED].
If the camera is a BL-C30A being used wirelessly, make sure the camera's switch
is set to [WIRELESS]. If the wireless signal from a wireless camera is too weak,
motion...](http://img.usermanuals.tech/thumb/58/75071/w300_bl-wv10a_en_om_d-202.png "Page 203
18
If the Camera Image Does Not Appear
If the image from a camera that you registered using Quick Setup does not appear,
confirm that the camera is turned on and that the Ethernet cable is connected to
the camera correctly. If the camera is a BL-C30A being used in wired mode, make
sure the camera's switch is set to [WIRED].
If the camera is a BL-C30A being used wirelessly, make sure the camera's switch
is set to [WIRELESS]. If the wireless signal from a wireless camera is too weak,
motion...")
18 If the Camera Image Does Not Appear If the image from a camera that you registered using Quick Setup does not appear, confirm that the camera is turned on and that the Ethernet cable is connected to the camera correctly. If the camera is a BL-C30A being used in wired mode, make sure the camera's switch is set to [WIRED]. If the camera is a BL-C30A being used wirelessly, make sure the camera's switch is set to [WIRELESS]. If the wireless signal from a wireless camera is too weak, motion...
Page 204
![Page 204
19
Entering Characters with the Remote Control
Characters (letters, numbers, and symbols) can be entered using the remote
control when setting camera names, user names and passwords, etc.
Use the navigator keys to select the
desired character, then press [ENTER]
to copy the text to the text field in the
upper-left part of the screen.
You can erase characters, beginning with
the last entered character, by pressing
[1]. When you have finished, press
[STOP] to use the entered characters.
You will...](http://img.usermanuals.tech/thumb/58/75071/w300_bl-wv10a_en_om_d-203.png "Page 204
19
Entering Characters with the Remote Control
Characters (letters, numbers, and symbols) can be entered using the remote
control when setting camera names, user names and passwords, etc.
Use the navigator keys to select the
desired character, then press [ENTER]
to copy the text to the text field in the
upper-left part of the screen.
You can erase characters, beginning with
the last entered character, by pressing
[1]. When you have finished, press
[STOP] to use the entered characters.
You will...")
19 Entering Characters with the Remote Control Characters (letters, numbers, and symbols) can be entered using the remote control when setting camera names, user names and passwords, etc. Use the navigator keys to select the desired character, then press [ENTER] to copy the text to the text field in the upper-left part of the screen. You can erase characters, beginning with the last entered character, by pressing [1]. When you have finished, press [STOP] to use the entered characters. You will...
Page 205
Using the Included Stand Insert the BL-WV10A into the included stand to use the unit in an upright position. Trademarks • SD mark is a trademark of the SD Card Association. • QuickTime and the QuickTime logo are trademarks of Apple Computer, Inc. • All other trademarks identified herein are the property of their respective owners. 1.Raise the antenna. 2.Align the first and last slot as shown an insert the BL-WV10A into the stand.Antenna First slot KK0505CH0PSQX3750ZAPrinted in Japan 2005Panasonic...