Panasonic Monitoring System BL-MS103 Operating Instructions

6
Connecting the BL-WV10A
There are 3 ways to connect your cameras to the BL-WV10A. Determine which 
method you will use, and refer to the pages listed below.
Connecting cameras directly to the BL-WV10A
To connect cameras directly to the BL-WV10A, see page 8.
Connecting cameras using an optional BB-HGW700A Camera Control Unit
To connect a BB-HGW700A, see page 12.
Note
Only 1 BB-HGW700A can be connected to the BL-WV10A wirelessly.
BL-WV10A
TV
Internet
BB-HGW700A
BL-WV10A
TV PC 

7
Connecting cameras using a router
To connect to a router, see “Connecting Cameras Using a Router” on page 42 of 
the Operating Instructions.
Note
• The only wireless router that can be used with the BL-WV10A is the 
Panasonic BB-HGW700A. All other routers will require a wired 
connection.
Internet
Router
BL-WV10A
TV PC 

8
Using the BL-WV10A Only
1.Connect the BL-WV10A to your TV using the included video cable.
2.Turn the TV on and set the TV's input switch to the external video input 
("VIDEO", "EXT", "INPUT 1", etc.)
3.Set the mode switch on the rear of the BL-WV10A to [SETUP].
4.Connect the DC cord to the AC adaptor and to the power outlet.
5.Turn on the BL-WV10A by connecting the DC cord to the unit.
• The startup screen appears on the TV screen.
6.Use an Ethernet cable to connect the...

9
Basic Setup (Using the BL-WV10A Only)
After the BL-WV10A starts up for the first time, the [Basic Setup] screen is 
displayed. For most installations, these parameters do not need to be changed. For 
information regarding Basic Setup settings, see “Setting the User Name and 
Password” on page 34 of the Operating Instructions.
1.Use the navigator keys to select [Finished], then press [ENTER].
2.When the dialog is displayed, select [Yes] then press [ENTER] to start Quick 
Setup.
• The BL-WV10A restarts. 

10
Quick Setup (Using the BL-WV10A Only)
To use the BL-WV10A with your cameras, you will need to configure the BL-
WV10A and your cameras. The BL-WV10A's Quick Setup utility can help you 
configure the devices easily.
1.After the unit restarts, wait while the Quick Setup utility scans for network and 
wireless settings.
• When the BL-WV10A has been configured, "Finished" is displayed and 
the buzzer sounds.
• With this connection setup, it is normal for no router or wireless router to 
be...

11
3.To register another camera, connect the camera to one of the LAN jacks of 
the BL-WV10A, then turn the camera on by connecting it to the power outlet.
4.When you have finished registering all cameras, set the BL-WV10A's mode 
switch to [NORMAL], disconnect the DC cord from the rear of the unit, 
reconnect the DC cord, then continue from “Viewing Camera Images” on 
page 17 

12
Using an Optional BB-HGW700A
Connecting Cameras Using the BB-HGW700A
1.Connect the BL-WV10A to your TV using the included video cable.
2.the TV on and set the TV's input switch to the external video input ("VIDEO", 
"EXT", "INPUT 1", etc.)
3.Set the mode switch on the rear of the BL-WV10A to [SETUP].
4.Connect the DC cord to the AC adaptor and to the power outlet.
5.Turn on the BL-WV10A by connecting the DC cord to the unit.
• The startup screen appears on the TV screen....

13
Basic Setup (Using an Optional BB-HGW700A)
After the BL-WV10A starts up for the first time, the [Basic Setup] screen is 
displayed. Here you can set the administrator user name and password. For most 
installations, other parameters do not need to be changed. For information 
regarding Basic Setup settings, see “Setting the User Name and Password” on 
page 34 of the Operating Instructions.
1.Select [Camera Settings], then press [ENTER].
2.Use the navigator keys to select [Admin. User Name], then press...

14
7.When the dialog is displayed, select [Yes] then press [ENTER] to start Quick 
Setup.
• Make sure 2 minutes have passed since you turned on the BB-HGW700A.
• The BL-WV10A restarts. 

15
Quick Setup (Using an Optional BB-HGW700A)
To use the BL-WV10A with your cameras and the BB-HGW700A, you will need to 
configure the BL-WV10A and each device. The BL-WV10A's Quick Setup utility 
can help you configure the devices easily.
1.After the unit restarts, wait while the Quick Setup utility scans for network and 
wireless settings.
• When the BL-WV10A and BB-HGW700A have been configured, 
"Finished" is displayed and the buzzer sounds.
2.Use an Ethernet cable to connect the camera...