Panasonic Monitoring System BL-MS103 Operating Instructions

180
A
AC Power Frequency 109
Address
Port 115
Admin Password 100
Admin User Name
100
Alarm Volume 98
Auto Return 110
B
Battery Safety 6
BL-WV10A
Default Settings List 135
Specifications 136
Brightness 124
Buzzer
Stopping 69
Turning off 69
C
Camera Compatibility 4
Camera List 63
Changing Order
119
Camera Name 109
,115
Camera Settings 100
Local Cameras
109
Remote Cameras 114
Camera Setup 108
Cameras
Adding 132
Display Options 122
,123,124
Erasing
118
Initializing 113
Registering Manually 105
Restarting...

[For assistance, please call: 1-800-272-7033] 181
M
MAC Address Filtering 102
Menu Screen
56
Mode Switch 12
,139
Movies
Display Options 125
Erasing 91
Playback Controls 89
Playing
88
Selecting 88
Show Frames 90
Viewing Information
90
Multi-Camera Screen 64
N
Network Settings 99
P
Panning/Tilting 57
Password
107
,116
Password Save 107
,116
Pictures
Display Options 126
Erasing 93
Playback Controls 93
Slide Show
93
Viewing 92
Positions
Home Position 59
Preset Positions 59
Sensor Position 59
Privacy Button...

182
T
Tilting/Panning 57
Timer Recording
76
Trigger Type 77
,81
Troubleshooting 148
U
User Name 107,116
V
Video output port 12
Viewing Camera Images 54
W
White Balance 110
Wireless
Channel 102
Communications
6
Format 101
Mode 101
Settings
101 

[For assistance, please call: 1-800-272-7033] 183 

KK0505CH0PSQX3749ZB
Panasonic Consumer Electronics Company, 
Division of Panasonic Corporation of North America
Printed in Japan
2005Panasonic Communications Co., Ltd. All Rights Reserved.
Panasonic Puerto Rico, Inc.
Carefully pack your unit, preferably in the original carton.
Attach a letter, detailing the symptom, to the outside of the carton.
Symptom
The information in this document is subject to change without notice.
Send the unit to an authorized servicenter, prepaid and adequately insur\
ed.
Do...

This guide will help you install and configure the BL-WV10A Wireless Camera 
Monitoring System and your Network Cameras (sold separately).
Included Items
Confirm that the following items are included in the product box.
Additional pieces can be ordered by calling 1-800-332-5368.
BL-WV10A AC adaptor AC cord Ethernet cable
Part no. 
PQLV202Y
Cord length: 3 m 
(10 ft.)Par t no. 
PSJA1069Z
Length: 1.8 m
(5 ft. 11 in.)Part no. 
PQJA10138Z
(Cat. 5 straight 
cable)
Length: 1 m
(3 ft. 3 in.)
Video cable Stand...

2
IMPORTANT SAFETY INSTRUCTIONS
When using this product, basic safety precautions should always be followed to 
reduce the risk of fire, electric shock, or personal injury.
1.Read and understand all instructions.
2.Keep these instructions.
3.Heed all warnings.
4.Follow all instructions.
5.Do not install this product near any heat sources such as radiators, heat 
registers, stoves, or other apparatus (including amplifiers) that produce heat.
6.Protect the AC adaptor cord and AC cord from being walked on...

3
Notice Regarding Battery Safety
1.Do not open or mutilate the batteries. Released electrolyte from the batteries 
is corrosive and may cause burns or injury to the eyes or skin. The electrolyte 
may be toxic if swallowed. If electrolyte comes in contact with the eyes, flush 
eyes with water.
2.Do not mix old and new batteries.
3.Do not heat or expose to flame.
4.Do not take apart or short circuit.
5.Do not attempt to recharge alkaline or manganese batteries.
6.Remove if the remote control is not going...

4
Recommended Accessories (sold separately)
Compatible router:
• Panasonic BB-HGW700A Network Camera Management System 
Compatible Network Cameras:
• Panasonic BL-C10A, BL-C30A (firmware version 1.22 or higher)
• HCM series (firmware version 1.08 or higher, however, some features 
cannot be used; see “Camera Compatibility” on page 4 of the Operating 
Instructions for more information on compatibility).
• Note that the following HCM series cameras are not supported by the BL-
WV10A:
-KX-HCM8
-KX-HCM10...

5
Preparing the Remote Control
The remote control included with the BL-WV10A is required for most operations.
Insert the included batteries as shown below.
Using the Remote Control
The remote control’s navigator 
keys are used to navigate 
through the BL-WV10A’s on-
screen menus and to select on-
screen items. The [RETURN] 
button is used to return to the 
previous menu. The [ENTER] 
button is used to select a menu 
item or parameter.
When using the remote control 
with the BL-WV10A, make sure 
you aim...