Panasonic Monitoring Software Digital Disk Recorder Wj Rt416 Operating Instructions

41
Firmware update of the recorder Firmware Update (Maintenance – Firmware Update)
Select Firmware Update under Maintenance from the pop-up menu (page 34).
Step 1
Click the [Choose File] button, and then select the update file.
→The file information (the file size and the updated time and date) and the version will be displayed.
Step 2
Click the [Firmware Update] button.
→Update of the firmware will start.
To validate the updated firmware, reboot the recorder.
Important:
Before rebooting the recorder,...

42
Download recorded images from the recorder
It is possible to search the desired recorded images by designating the camera channels, recording type, and the
start time and the end time of recording.
Screenshot 1
Click the [Data Download] button (page 8).
→The Data Download window will be displayed.
Step 1
Set the following search filters.
Camera: Select the camera channels.
To select all the camera channels, check
the All checkbox.
Filtering: Select the recording type.
• Off: Searches without...

43
Remote Talk
It is possible to communicate with the login recorder using audio. To communicate using audio, connect a speaker
and a microphone to both the recorder and the PC.
Click the [Remote Talk] button.
→Remote talk will start.
When remote talk starts, the [Remote Talk] button  will change to the [Stop Remote Talk] button  . To stop
remote talk, click the [Stop Remote Talk] button  .
Important:
• The volume level of remote talk can be adjusted by the Sound and Audio Device control panel of...

44
Configure the settings of the monitoring software
(Monitor System Config)
When clicking the [Monitor System Setup] button, the pop-up menu will be displayed.
Recorder Setup (Monitor System Config – Recorder Setup)
The following operations can be made on the Recorder Setup window.
• Registration of the recorder to be operated using this software
• Edit of the recorder information
• Edit of the camera information
Screenshot 1
Select Recorder Setup under Monitor System Config
from the pop-up menu.
→The...

45
Setup items
Tree view of the recorders and the cameras
operable using the monitoring system
The names of the recorders and the camera channels
will be displayed. When the icon is clicked, the informa-
tion of the respective device will be displayed on the
right of the window.
Monitor System Info.
The name of the monitoring system will be displayed.
Edit the name of the monitoring system.
Click the [Edit] button, and then edit the name of the
monitoring system. To apply the edited name, click the...

46
My Favorite Display Setup (Monitor System Config – My Favorite Display Setup)
Assign the desired camera channel to the desired area as a favorite. Up to 10 favorites (Favorite1 – Favorite10)
can be registered.
Screenshot 1
Select My Favorite Display Setup under Monitor
System Config from the pop-up menu (page 44).
→The My Favorite Display Setup window will be dis-
played.
Step 1
Select the favorite name (Favorite1 – Favorite10) from
the pull-down menu.
Step 2
Select the recorder to access and the...

47
Sequential Display Setup (Monitor System Config – Sequential Display Setup)
Configure the settings relating to the sequential display.
Screenshot 1
Select Sequential Display Setup under Monitor
System Config from the pop-up menu (page 44).
→The Sequential Display Setup window will be dis-
played.
Step 1
The Sequential Display Setup window contains 2 tabs;
the Normal Sequence tab and the My Favorite
Sequence tab.
On the Normal Sequence tab, the settings for the
sequential display using the cameras...

48
Setup items
Out Sequence Cameras
In Sequence Cameras
To not use a specified camera for the sequential dis-
play, select the camera not to be used, and then click
the []
button.Total Time
Set the total time of the sequential display to 0 - 999
minutes. When 0 is entered, the sequential display will
not stop until manually stopped.
The default is 30 minutes.
Dwell Time
Set the dwell time (interval of switching from a camera
channel to the next camera channel) to 15 - 999 sec-
onds.
The default is 60...

49
Screenshot 2
The map will be created.
Step 2
Select the created map displayed in the Map column,
and then click the [Load] button to apply the background
image.
For example, a schematic image of inside a bank, a
supermarket, etc.
The background image should be a bitmap image (bmp)
or a jpeg image (jpeg).
To cancel the applied background image, click the
[Clear] button.
Step 3
Click the [Layout] button.
Screenshot 3
The Map Edit window will be displayed.
Step 4
Locate each of the camera icons onto the...

50
Screenshot 1
Select Advanced Setup under Monitor System
Config from the pop-up menu (page 44).
→The Advanced Setup window will be displayed.
Step 1
Configure the following setup items.
Disconnect Time
The live image will be disconnected when no operation
of the PC has been made for the selected duration.
The following are available for Wait Time.
30Min, 1Hour, 2Hours, Never
When the Auto Reconnect checkbox is checked, the
disconnected live image will be automatically connected
again within 5 minutes...