Panasonic Monitoring Software Digital Disk Recorder Wj Rt416 Operating Instructions

31
Sequential display
The displayed images from multiple cameras will be switched automatically. 
To start the sequential display, configure the settings relating to the sequential display in advance. Refer to page 47
for how to configure the settings relating to the sequential display.
Screenshot 1
When clicking the [Sequential display] button, the pop-
up menu will be displayed.
Step 1
Select Normal Sequential Display or My Favorite
Sequential Display.
Important:
When images are currently being...

32
Favorite Display
It is possible to register a camera channel as a favorite and assign it to the desired area.
Refer to page 46 for how to register a camera channel as a favorite.
Screenshot 1
Click the [My Favorite Display] button.
→The My Favorite Display window will be displayed.
Step 1
Select the desired favorite, and then click the [OK] but-
ton.
The password registered when registered the recorder
will be entered automatically.
→Images from the registered camera channel as
favorite will be...

33
Map display
It is possible to display the diagram of the camera location arrangement (map). Camera connection can be estab-
lished on the map.
Configure the settings relating to the map display in advance (page 48).
Screenshot 1
Click the [Map] button.
→The Map window will be displayed.
Step 1
The camera icons will be displayed in the Map win-
dow.
indicates the camera that is available for live
image monitoring.
indicates the camera that is not available for live
image monitoring. (Not connected)...

34
Recorder operation
The following operations of the recorder are available using this software.
• Configuration of the settings of the recorder
• Check of each log of the recorder
• Check of the system information and disk information of the recorder
• Start/stop of the manual recording using this software
• Determination whether to enable or disable the alarm output from the AUDIO IN/ALARM OUT terminal on the
rear of the recorder
• Reboot of the recorder
• Download/upload of the setup data from/to the...

35
Recording/Event Setup (Setup – Recording/Event Setup)
Configure the basic settings relating recordings and the event action of the recorder.
Communication Setup (Setup – Communication Setup)
Configure the basic network settings of the recorder.
Screenshot 1
Select Communication Setup under Setup (page
34) from the pop-up menu.
→The Communication Setup window will be dis-
played.
Step 1
The setup items except the settings on the [NTP Setup]
tab on the Communication Setup window are the
same as the...

36
[NTP Setup] tab
Time Adjustment
Select On or Off to determine whether or not to
adjust time by synchronizing with the NTP server.
Default:Off
NTP Server Address
Enter the NTP server IP address when On is selected
for NTP Synchronization.
Enter up to 128 alphanumeric characters (including
hyphens (-), periods (.) and underscores (_)).
Refresh Interval
Select an interval of time inquiry to the NTP server from
the following.
1h, 2h, 6h, 12h, 24h
Default:1h 

37
Check of each log of the recorder (Log)
It is possible to check the alarm log, error log, operation log and access log of the recorder.
The contents of each log are the same as the contents that can be checked by operating the recorder directly.
Refer to the installation guide of the recorder for further information.
It is also possible to save each log on the PC in the CSV format by clicking the [Save] button.
Select Log (page 34) from the pop-up menu.
→The Log window will be displayed.
Check the...

38
Start/stop of the manual recording using this software (Manual Rec. Control)
It is possible to start and stop the manual recording using this software.
Screenshot 1
Select Manual Rec. Control (page 34) from the pop-
up menu.
→The Manual Rec. Control window will be displayed.
Step 1
Select On or Off to start or stop the manual record-
ing.
On: Starts the manual recording using this software.
Off: Stops the manual recording using this software.
Step 2
Click the [Apply] button.
→The selected operation...

39
Download the setup data
Step 1
Click the [Download] button.
→The Save… window will be displayed.
Step 2
Designate the directory in which the setup data is to be
downloaded (default name: RT4Set.bin), and then click
the [Save] button.
→Download of the setup data will start.
Upload the setup data
Step 1
Click the [Choose File] button, and then select the setup
data to be uploaded.
Step 2
Click the [Upload] button.
→Upload of the setup data will start.
Note:
The settings on the [Network setup] tab of...

40
Download/upload of the language data from/to the recorder Language Data
Download/Upload (Maintenance – Language Data Download/Upload)
It is possible to download/upload the customized language data from/to the recorder. The default language of the
custom language is English.
Select Language Data Download/Upload under Maintenance from the pop-up menu (page 34).
→The Language Data Download/Upload window will be displayed.
Download the language data
Step 1
Click the [Download] button.
Step 2
Designate...