Panasonic Monitoring Software Digital Disk Recorder Wj Rt416 Operating Instructions

21
Play recorded images from the search result window displayed after searching by
designating the start time of recording (Time & Date Search Playback)
Screenshot 1
Start operation when the operation window is being dis-
played.
Step 1
Right-click on a blank area in the image display area.
Screenshot 2
The pop-up menu will be displayed.
Step 2
Select T&D Search Playback.
Screenshot 3
The T&D Search Playback window will be displayed.
Step 3
Set the following items.
Camera
Select the desired camera to be...

22
Screenshot 4
Playback of images recorded in the designated time and
date will start in the area select in step 1.
Notes:
• When no recorded image was found at the designat-
ed time and date, playback will start from the next
record.
• When there is no recorded image at all, playback will
not start.
Operations during playback can be made using the con-
trol panel. Refer to page 28 for further information. 

23
Stop playback
When playback is stopped, the connection with the recorder will also be disconnected.
Screenshot 1
Start operation when the operation window is being dis-
played.
Step 1
Right-click on the area where recorded images are
being played.
Screenshot 2
The pop-up menu will be displayed.
Step 2
Select Stop Playback.
→Playback will stop and the connection with the
recorder will be disconnected. 

24
Control panel
Control of the camera such as panning/tilting, saving an image, image capturing and operation of the setup menu of
the camera can be made using the control panel. Operation during playback of recorded images can also be made
using the control panel.
Note:
The following operations can be made both when displaying live images and when playing recorded images.
• Saving an image on the PC
• Capturing of images from the camera
• Muting audio
• Displaying of images from the camera on a full...

25
Notes:
• When the file size of the saved image is more than 500 MB, the file will be automatically divided into several files.
• It is impossible to save the image while playback is being stopped or paused.
• When this software starts the alarm recording during saving a file, the file saving will be cancelled automatically.
• Depending on the timing to start saving images, the first several seconds of the saved image may not be played
on the RT4Viewer.
Capture the images currently being displayed
When...

26
Control the cameras
It is possible to operate the camera while displaying images.
Note:
To control the camera, configure the settings such as the communication type between the camera and the
recorder, protocol, etc. Refer to the installation guide of the recorder for how to configure the required settings of
the recorder.
Refer to the operating instructions of the camera for how to configure the required settings of the camera.
Depending on the models of the connected cameras, it may be impossible to...

27
Brightness, auto function
When the [A] button is clicked, the extension panel with the buttons will be displayed on the left side of the control
panel.
Brightness and auto function can be operated with these buttons. To close the displayed extension panel, click the
[A] button again.
Brightness: Adjusts the iris of the lens
Auto: Moves the camera with an auto function set in advance
Operation of the setup menu of the camera
When the [B] button is clicked, the extension panel with the buttons will be...

28
Operations during playback
Operations during playback can be made using the control panel (page 24).
[Stop] button: Click this button to stop playback.
[Pause] button: Click this button to pause playback. Click this button again to release pausing
and resume the playback.
[Previous record] button: It is possible to select the previous record by clicking this button when multiple
results have been selected on the search result window.
[Play/frame by frame play] button: Click this button to start...

29
Other available operations when displaying live images
When displaying live images, the following display functions are available.
• Frame display
• Sequential display
• Favorite display
• Map display
These display function can be started by clicking the respective button of the system control buttons.
Frame display
Live images from the camera will be displayed in the frame play. Display interval can be set by configuring I Frame
Interval on the Common Setup tab of the Recording/Event Setup window...

30
Screenshot 2
The frame display will start.
Step 2
Number of areas in the image display area will change
depending on a number of the selected cameras.
Number of the selected cameras Image display
1 Single screen
2 - 4 4-screen
5 - 9 9-screen
10 - 16 16-screen
When right-clicking on the displayed image, the follow-
ing pop-up menu will be displayed.
• Stop Frame Display: Stops the frame display
• Full Screen: Display the selected image on a full
screen
• Default Screen: Returns to the multi-screen from...