Panasonic Memory Card Video Recorder AG-CPD15P Operating Instructions

81
Administrator Operations on the 
Remote Control Panel (separately sold)
  Zoom Limit
Use this function to enter maximum 
zoom ratio.
Setting : ×22, ×220
  AGC Level
Use this function to set the level of 
camera input gain control.
Setting : LOW, MID, HIGH, OFF
  Init Backlight
Use this function to turn backlight 
compensation on or off when the 
power is on.
Setting : ON, OFF, LAST
∗
 Init  AE  Shift
Use this function to adjust 
brightness when the power is on. 
Setting : -2, -1, 0, +1, +2, LAST
∗...

82
Administrator Setup (continued)
 Init IR Mode
Use this function to set the IR 
function when the power is on. 
Setting : AUTO
∗1, OFF, ON, LAST∗2
 IR  Level
Use this function to set the IR 
function level during automatic 
switching.
Setting : LOW, HIGH
 IR  Time
Use this function to set the IR 
function detection time during 
automatic switching.
Setting (sec.) : 10, 30, 60, 300
  AUTO FOCUS
Selects color camera focusing 
method when, 
•  
[Init LPR Mode] is set to “DISABLE”
•  [Init LPR Mode] is set...

83
Administrator Operations on the 
Remote Control Panel (separately sold)
Management of Officer Setup
  Setting Method
Use one of the following methods to 
enter officer data. 
AUTO    :  
Automatically reads and 
loads officer data for up to 
two persons from a USB 
memory device.
 
MANUAL :  Display the menu on the 
LCD panel, and then read 
in and configure officer 
data from a USB memory 
device on the Officer setup 
top screen
.
LIST     :  Display the menu on the 
LCD panel and allow you 
to set...

84
 Connection of Radar
Use this function to specify the radar 
gun connection port.
VPU :   when connected to this unit
OFF : when not connected
Notes: 
•  This unit has no function for 
calculating the speed of the target 
vehicle from the moving own 
vehicle. 
•  No distinction is made between 
the speed of an approaching 
target vehicle and a receding one.
•  Some radar guns come with 
a function for setting conditions 
that enable correct measurement 
of target vehicle speed. Use 
this function...

85
Administrator Operations on the 
Remote Control Panel (separately sold)
Administrator Setup (continued)
Rec Start Information
 Own  Speed
Use this function to set the speed 
of your own vehicle at the start of 
recording according to set speed 
unit.
Setting : OFF, 1 - 500
 Target Speed
Use this function to set the speed 
of the target vehicle at the start of 
recording according to set speed 
unit.
Setting : OFF, 1 - 500
 Speed  Unit
Setting : MPH, KPH
Notes: 
•  When both own vehicle speed 
and...

Format
Format all P2 cards !!!
FormatCancel Slot1  :  AJ-P2C016RG
Slot2  :  AJ-P2C032RG 93 Days62 Days
86
Administrator Setup (continued)
 Format
Use this function to format all P2 cards in this unit. 
Note that 16 GB or higher capacity P2 cards limit the number of files that can 
be recorded. The table below shows the number of recording days and the 
maximum number of files recorded per day. 
Card model numberNumber of 
recording 
daysMaximum number of files recorded per 
day
With bookmarks Without...

87
Administrator Operations on the 
Remote Control Panel (separately sold)
Administrator Setup (continued)
Auto Maintenance
During continuous operation, the 
Memory Card Video Recorder restarts, 
checks files and frees memory at regular 
intervals to maintain system health.
 
When the unit is regularly turned off, 
auto maintenance is not required.
 
To use the unit without having to 
regularly power it off, activate auto 
maintenance with intervals as short as 
possible. 
A dialog announcing the start...

88
Administrator Setup (continued)
 Next Maintenance Day
This function shows the date for the 
next auto maintenance operation. 
The set Operation, Interval, Day 
and Time appear at the bottom of 
the screen.
 Operation
Use this function to turn auto 
maintenance on or off.
The “Set” button appears when a 
setting is changed. Select the “Set” 
button and use the [
] button to 
confirm the entry. The “Set” button 
disappears upon confirmation. Use 
the [MENU] button, [CONTROL 
PANEL ON/OFF] button,...

89
Administrator Operations on the 
Remote Control Panel (separately sold)
Service
 AG-CPD15 Operating Time
Use this function to view the 
operating time of this unit. 
(unit : H)
 FAN Operating Time
Use this function to view the operating 
time of the fan.
(unit : H)
 CAM1 Operating Time
Use this function to view the operating 
time of the Color Camera.
(unit : H)
 AG-RCP30 Operating Time
Use this function to view the operating 
time of the Remote Control Panel.
(unit : H)
 LCD Lighting Time
Use this...

90
 Menu  Copy
Use this function to copy menu 
settings from this recorder to another 
memory card recorder (referred to as 
“a second recorder” in this manual). 
Operations on this recorder
1.  Connect a USB memory 
device to this recorder.
The configuration file∗1 cannot be 
output to a P2 card.
2.  Select [Service] - [Operations] 
- [Menu Copy], and press [
] 
to confirm the entry.
A confirmation dialog box appears.
3.  Select “Copy”, and accept by 
pressing the [
] button.
This creates a...