Panasonic Memory Card Video Recorder AG-CPD15P Operating Instructions

51
Operation Using the Remote 
Control Panel (separately sold)
  Returning to previous screen
Press the [RETURN] button to return 
to the previous screen. The menu is 
cleared when the “Archive” screen, 
Officer setup top screen or Setup/
Admin top screen is displayed.
  Long menus
Menus with arrows at the top and 
bottom contain items that are 
currently not shown.
Basic Menu Operations (continued) 

52
Setting up/Deleting Officer Data
when the USB memory device 
is connected again, check if the 
officer data file has been correctly 
saved to the USB memory device.  
If the above measures do not 
correct this problem, replace the 
USB memory device.
Notes:
•  If a USB memory device is connected 
and the officer data is read during 
recording, the file will be split up 
at the location where reading was 
effectuated.
•  Once the officer data has been 
read, the USB memory device 
may be removed.
•...

53
Operation Using the Remote 
Control Panel (separately sold)
7.  To enter officer2, replace the 
current USB memory device 
with a USB memory device 
containing data for officer2.
8.  Use the [
,] buttons to select 
[Officer2].
9.  
Use the [,] buttons to select 
[Load] and press [
] to confirm 
the entry.
  This registers officer2 and the name 
and ID appear.
Note:
Long names and IDs may not be 
displayed in full.
LIST mode
Open the menu on the LCD panel and 
read in the officer data registered in...

54
You can lock specific buttons on the 
Remote Control Panel to prevent 
accidental pressing of the buttons.
Locking
1.  Press the [MENU] button.
The Menu appears.
2.  Use the [,] buttons to select 
[Setup/Info] and press [
] to 
confirm the entry.
3.  Use the [
,] buttons to select 
[Officer] and press [
] to 
confirm the entry.
 The Officer setup top screen appears.
4.  Use the [,] buttons to select 
[Operation Key Lock].
5.  Use the [
,] buttons to select 
“ON”.
The [LOCK] lamp lights, and the...

55
Operation Using the Remote 
Control Panel (separately sold)
Viewing Live Video
Use the functions described below to 
manipulate video output by the camera 
and sound from the microphone.  
Press the [LIVE/ARCHIVE] button to 
view live video. A commercially available 
camera connected to the [CAMERA2] 
connector cannot be controlled.
 Selecting a camera
Press the [CAMERA SELECT] button.
Each press of the button toggles the 
unit between the [CAMERA1] and 
[CAMERA2] connector inputs. 
Note:
Color Camera...

56
Adjusting image focus
This menu is available only when the 
[CAMERA1] connector input is selected 
by the [CAMERA SELECT] button.
1.  Press the [MENU] button.
The Menu appears.
2.  Use the [,] buttons to select 
[Camera] and press [
] to 
confirm the entry.
The Auto Focus (ENTER) appears.
3.  Use the [] button to confirm 
the entry.
The autofocus function automatically 
focuses the image.
4.  When the autofocus function 
cannot properly focus the 
image, use the [
,] buttons 
to select [Manual...

57
Operation Using the Remote 
Control Panel (separately sold)
Viewing Live Video (continued)
Setting LPR mode
Use of license plate recognition 
requires the following setup.  
This menu is available only when [Init 
LPR Mode] in administrator setup is 
set to “ENABLE”. 
And this menu is available only when the 
[CAMERA1] connector input is selected 
by the [CAMERA SELECT] button.
 
1.   
Press the [MENU] button.
The Menu appears.
2.  Use the [,] buttons to select 
[Camera] and press [
] to 
confirm the...

58
Viewing Live Video (continued)
Setting camera zoom (in LPR mode)
The camera zoom can be set in the 
range 1.0 to 22.0 x.  
This menu is available only when [Init 
LPR Mode] in administrator setup is 
set to “ENABLE” and [LPR Mode] is 
set to “LPR”. 
And this menu is available only when the 
[CAMERA1] connector input is selected 
by the [CAMERA SELECT] button.
 
1.   
Press the [MENU] button.
The Menu appears.
2.  Use the [,] buttons to select 
[Camera] and press [
] to 
confirm the entry.
3.  Use the...

59
Operation Using the Remote 
Control Panel (separately sold)
Viewing Live Video (continued)
To turn off the [REC] lamp during recording
The Color Camera [REC] lamp lights 
during recording. The following steps 
allow you to keep this lamp off at all 
times.
1.  Press the [MENU] button.
The Menu appears.
2.  Use the [,] buttons to select 
[Setup/Info] and press [
] to 
confirm the entry.
3.  Use the [
,] buttons to select 
[Camera LED].
4.  Use the [
,] buttons to select 
“OFF”.
The lamp will now remain...

60
Viewing the status of this unit
The following function is provided to 
enable viewing the status of this unit 
and the trigger signal (GPIO1-8) status.
1.  Press the [MENU] button.
The Menu appears.
2.  Use the [,] buttons to select 
[Setup/Info] and press [
] to 
confirm the entry.
3.  Use the [
,] buttons to select 
[On Screen Type].
4.  
Use the [,] buttons to select 
“AUTO”, “SIMPLE”, “DETAILS” 
or “OFF”.
AUTO: 
      The simple On-Screen Display 
appears for 3 to 5 seconds when 
any of the...