Panasonic Memory Card Portable Recorder AG-HPG10P Operating Instructions

71
Menu
Setting menu configuration
1394 CONFIG 1394 STATUS
OPTION MENULCD OPERATION OPERATION USER FILE SYSTEM FREQ LANGUAGE POWER SAVE TIME ZONE CLOCK SET BEEP SOUND PC MODE
OTHER FUNCTIONSSD CARD FORMAT  USER FILE
CARD FUNCTIONSWFM  MENU BACK LCD ASPECT
DOWNCON MODE LCD SET LCD REVERSE LCD BACKLIGHT OTHER DISPLAY P2 CARD REMAIN  CARD/BATT LEVEL METER DATE/TIME VIDEO OUT OSD
DISPLAY SETUPSETUP SDI EDH SDI METADATA SDI OUT CMPNT/SDI SEL
AV OUT SETUP AUDIO OUT REPEAT PLAY
PLAYBACK FUNCTIONSUSER3 USER2...

72
List of setting menus
RECORDING SETUP screen 
When the settings are changed using the “SYSTEM FREQ” item (page 79) on the “OTHER FUNCTIONS” 
screen, whatever has been set on the “RECORDING SETUP” screen will be changed to the initial setting.
Item Description of settings
SYS FORMATThis is used to set the 1394 input recording format and playback format.
(60 Hz)
1080/60i, 720/60P, 720/30PN, 720/24PN, 480/60i 
(50 Hz)
1080/50i, 720/50P, 720/25PN, 576/50i
SD(480i/576) MODEThis is used to set the 1394...

73
Menu
        The underlined settings are the factory mode settings.
RECORDING SETUP screen (continued)
Item Description of settings
UB MODEThis is used to set what is to be recorded as the user’s bit.
USER:
 The user information is recorded.
TIME:
 The time of the recording is recorded.
DATE:
 The date/time of the recording are recorded.
TCG:
 The value generated by the time code generator is recorded.
FRM. RATE:
 The information of the frame rate after frame conversion is recorded.
  
ab cd
  a:...

List of setting menus (continued)
74
        The underlined settings are the factory mode settings.
SW MODE screen
Item Description of settings
USER1This is used to set which function is to be assigned to the USER1 button.
SYS FORMAT:
  System format (page 72)
SD MODE :
  SD mode (page 72)
SHOT MARK :
  A shot mark is recorded on the clip. (Page 39)
TEXT MEMO :
  A text memo is recorded. (Page 38)
LCD BL :
  LCD backlight (page 76)
V OUT OSD :
  Video output on-screen display (page 76)
AUDIO OUT :...

75
Menu
        The underlined settings are the factory mode settings.
PLAYBACK FUNCTIONS screen
Item Description of settings
REPEAT PLAYThis is used to set repeat playback.(Page 43)
ON:  Playback is repeated.
OFF: Playback is not repeated.
AUDIO OUTThis is used to set the audio signals to be output from the AUDIO OUT connectors 
(pin jacks) during playback.
CH1 · CH2:
  CH1 connector = CH1 signal, CH2 connector = CH2 signal,
CH1:
  CH1 connector = CH1 signal, CH2 connector = CH1 signal,
CH2:
  CH1...

76
List of setting menus (continued)
        The underlined settings are the factory mode settings.
DISPLAY SETUP screen
Item Description of settings
VIDEO OUT OSDWhen ON is selected as this item’s setting, the information displayed on the LCD 
monitor is output as a video output signal together with the video signals. (Component 
output signals, VIDEO output signals, SDI output signals)
ON, OFF
DATA/TIMEThis is used to select the setting for displaying the date and time on the LCD monitor 
and video...

77
Menu
        The underlined settings are the factory mode settings.
DISPLAY SETUP screen (continued)
Item Description of settings
LCD ASPECTThis is used to select the aspect ratio for the LCD monitor.
AUTO:
  The aspect ratio is automatically selected based on the recording mode, playback 
mode and other information.
4:3:
  The aspect ratio is fixed at 4:3.
Note
When images are displayed with the 16:9 aspect ratio, black bands appear at the top 
and bottom of the screen. No parts of the images are...

78List of setting menus (continued)
        The underlined settings are the factory mode settings.
Item Description of settings
PC MODEThis is used to select the connectors and mode to be used for data transfer. (The USB 
and 1394 connectors cannot be used at the same time.)
USB DEVICE:
  File transfer mode using the USB connector
USB HOST:
  In this mode, files are copied on an external hard disk from the P2 card using the 
USB connector.
1394 DEVICE:
  File transfer mode using the 1394 connector
1394...

79
Menu
        The underlined settings are the factory mode settings.
OTHER FUNCTIONS screen (continued)
Item Description of settings
POWER SAVEThis is used to select the power-saving mode which is to be established when none of 
the function keys or buttons have been operated for 5 or so minutes.
ON:
  The unit’s power is turned off.
OFF:
  The unit remains in the stop mode without turning off its power.
 •  While the unit is connected by an IEEE1394 cable or USB cable to an external 
device and...

80List of setting menus (continued)
        The underlined settings are the factory mode settings.
OPTION MENU screen
This screen appears when [MENU] are pressed while [STOP] is held down on the thumbnail display off 
screen.
Item Description of settings
1394 STATUSThe 1394 status display sub-screen is displayed.
FORMAT: 
  Format of the input or output signals
RATE: 
  Transfer rate of the input or output signals
60/50: 
  System of input or output signals
CH: 
  Value of the channels whose signals are...