Home
>
Panasonic
>
Recorder
>
Panasonic Memory Card Portable Recorder AG-HPG10P Operating Instructions
Panasonic Memory Card Portable Recorder AG-HPG10P Operating Instructions
Here you can view all the pages of manual Panasonic Memory Card Portable Recorder AG-HPG10P Operating Instructions. The Panasonic manuals for Recorder are available online for free. You can easily download all the documents as PDF.
Page 61
![Page 61
61
Editing
USB DEVICE
DISCONNECT
10 Hold down [POWER] for at least 2
seconds to turn off the unit’s power.
The PC mode cannot be released simply by
holding down [MODE].
• While files are being transferred, the power
will not be turned off even if the POWER
button is pressed.
• Do not remove the P2 card while the USB
connection is established.
• While the USB connection is established, the
P2 card access LEDs will remain off at all times
except when the data on the cards is being
accessed....](http://img.usermanuals.tech/thumb/58/76175/w300_aghpg10_en_om_d-60.png "Page 61
61
Editing
USB DEVICE
DISCONNECT
10 Hold down [POWER] for at least 2
seconds to turn off the unit’s power.
The PC mode cannot be released simply by
holding down [MODE].
• While files are being transferred, the power
will not be turned off even if the POWER
button is pressed.
• Do not remove the P2 card while the USB
connection is established.
• While the USB connection is established, the
P2 card access LEDs will remain off at all times
except when the data on the cards is being
accessed....")
61 Editing USB DEVICE DISCONNECT 10 Hold down [POWER] for at least 2 seconds to turn off the unit’s power. The PC mode cannot be released simply by holding down [MODE]. • While files are being transferred, the power will not be turned off even if the POWER button is pressed. • Do not remove the P2 card while the USB connection is established. • While the USB connection is established, the P2 card access LEDs will remain off at all times except when the data on the cards is being accessed....
Page 62
![Page 62
62
Normal displays
Screen displays
1 Time code displays
Each time [COUNTER] is pressed, the following
data (or no information displayed) is selected
in turn.
COUNTER: (Only during recording standby or
recording)
Counter value
TC:
Time code value: [TC∗
] is displayed when the
time code value could not be read correctly
from the P2 card.
UB:
User’s bit: [UB∗
] is displayed when the user’s
bit value could not be read correctly from the
P2 card or tape.
FR:
Information on the frame rate of...](http://img.usermanuals.tech/thumb/58/76175/w300_aghpg10_en_om_d-61.png "Page 62
62
Normal displays
Screen displays
1 Time code displays
Each time [COUNTER] is pressed, the following
data (or no information displayed) is selected
in turn.
COUNTER: (Only during recording standby or
recording)
Counter value
TC:
Time code value: [TC∗
] is displayed when the
time code value could not be read correctly
from the P2 card.
UB:
User’s bit: [UB∗
] is displayed when the user’s
bit value could not be read correctly from the
P2 card or tape.
FR:
Information on the frame rate of...")
62 Normal displays Screen displays 1 Time code displays Each time [COUNTER] is pressed, the following data (or no information displayed) is selected in turn. COUNTER: (Only during recording standby or recording) Counter value TC: Time code value: [TC∗ ] is displayed when the time code value could not be read correctly from the P2 card. UB: User’s bit: [UB∗ ] is displayed when the user’s bit value could not be read correctly from the P2 card or tape. FR: Information on the frame rate of...
Page 63
63 Displays 50M: Recording and playback in the 480i, 576i DVCPRO50 format 25M: Recording and playback in the 480i, 576i DVCPRO25 format DV: Recording and playback in the 480i, 576i DV format 4 System frequency displays 60: 59.94 Hz 50: 50 Hz 5 1394 TC display This appears when ON has been selected as the 1394 IN PRESET item setting on the setting menu RECORDING SETUP screen. 6 Squeeze recording display This appears when images which were squeeze-recorded in the 480i/576i format are...
Page 64
![Page 64
64
Screen displays (continued)
16 Remaining media memory displays
The amount of memory remaining on the
card in the slot targeted for recording is
displayed when “ONE CARD” is selected
as the “P2 CARD REMAIN” item setting on
the setting menu “DISPLAY SETUP” screen.
The target slot can be switched to another
slot using “SLOT SEL” assigned to [USER].
When “TOTAL” is selected, the total amount
of memory remaining on the two cards is
displayed.
17 Media information displays
The card slots in which...](http://img.usermanuals.tech/thumb/58/76175/w300_aghpg10_en_om_d-63.png "Page 64
64
Screen displays (continued)
16 Remaining media memory displays
The amount of memory remaining on the
card in the slot targeted for recording is
displayed when “ONE CARD” is selected
as the “P2 CARD REMAIN” item setting on
the setting menu “DISPLAY SETUP” screen.
The target slot can be switched to another
slot using “SLOT SEL” assigned to [USER].
When “TOTAL” is selected, the total amount
of memory remaining on the two cards is
displayed.
17 Media information displays
The card slots in which...")
64 Screen displays (continued) 16 Remaining media memory displays The amount of memory remaining on the card in the slot targeted for recording is displayed when “ONE CARD” is selected as the “P2 CARD REMAIN” item setting on the setting menu “DISPLAY SETUP” screen. The target slot can be switched to another slot using “SLOT SEL” assigned to [USER]. When “TOTAL” is selected, the total amount of memory remaining on the two cards is displayed. 17 Media information displays The card slots in which...
Page 65
65 Displays LACK OF REC CAPACITY! There is not enough memory on the card for the clips to be recorded. Insert a card with enough memory on the card for the clips to be recorded. HDD CAPACITY FULL! The hard drive does not have enough free memory. Use a new hard drive or formatted hard drive since the connection destination target does not have enough remaining memory. TOO MANY PARTITIONS! There are too many partitions. The maximum number of partitions available on a hard drive is 15 so use a...
Page 66
66 Screen displays (continued) Error displays Errors are displayed when trouble has occurred in the unit, P2 card, etc. If the error persists even after turning the power off and back on, depending on what the error message says, replace the card or contact your dealer. SYSTEM ERROR This appears when trouble has occurred in the system. Turn the system’s power off and then back on. P2 MICON ERROR (no response from P2 microcomputer), P2 CONTROL ERROR (P2 control trouble) TURN POWER OFF This...
Page 67
![Page 67
67
Displays
Selecting what is to be displayed on the screen
The following items appearing on the LCD monitor screen are displayed when [MENU/MODE CHK] is held
down or when a setting for the “OTHER DISPLAY” item (page 76) on the setting menu “DISPLAY SETUP”
screen has been selected.
Item displayed MODE CHECKOTHER DISPLAY item setting
ALL PARTIAL OFF
1 Time code displays — — — —
2 Warning display — — — x
3 System format displays
x
4 System frequency displays
x
5 1394 TC display
xx
6 SQU...](http://img.usermanuals.tech/thumb/58/76175/w300_aghpg10_en_om_d-66.png "Page 67
67
Displays
Selecting what is to be displayed on the screen
The following items appearing on the LCD monitor screen are displayed when [MENU/MODE CHK] is held
down or when a setting for the “OTHER DISPLAY” item (page 76) on the setting menu “DISPLAY SETUP”
screen has been selected.
Item displayed MODE CHECKOTHER DISPLAY item setting
ALL PARTIAL OFF
1 Time code displays — — — —
2 Warning display — — — x
3 System format displays
x
4 System frequency displays
x
5 1394 TC display
xx
6 SQU...")
67 Displays Selecting what is to be displayed on the screen The following items appearing on the LCD monitor screen are displayed when [MENU/MODE CHK] is held down or when a setting for the “OTHER DISPLAY” item (page 76) on the setting menu “DISPLAY SETUP” screen has been selected. Item displayed MODE CHECKOTHER DISPLAY item setting ALL PARTIAL OFF 1 Time code displays — — — — 2 Warning display — — — x 3 System format displays x 4 System frequency displays x 5 1394 TC display xx 6 SQU...
Page 68
68 List of recording/playback and output formats For system format 60 Hz regions Format settingRecording statusOutput settingOutput status SYS FORAMT1394 recording/ playback formatRecording/ playback audio channelsCMPNT/ SDI SELSDI OUTSDI OUT AUDIOCOMPONENT OUTVIDEO OUTPlayback 1394 output 1080i/ 60iDVCPRO HD1080i/59.94i4chAUTO1080i/ 59.94i 4ch1080i/ 59.94i 480i/ 59.94iDVCPRO HD1080i/59.94i 1080i1080i/ 59.94i1080i/ 59.94i 480i480i/ 59.94i480i/ 59.94i 720P/ 60PDVCPRO HD720P/ 59.94P4chAUTO720P/...
Page 69
![Page 69
69
Displays
[For 50 Hz system format regions]
Format
settingRecording statusOutput
settingOutput status
SYS
FORAMT1394 recording/
playback formatRecording/
playback
audio
channelsCMPNT/
SDI SELSDI OUTSDI OUT
AUDIOCOMPONE
NT OUTVIDEO OUTPlayback 1394
output
1080i/
50iDVCPRO
HD1080i/50i4chAUTO1080i/
50i
4ch1080i/
59.94i
576i/50iDVCPRO HD
1080i/50i 1080i1080i/
501080i/
59.94i
576i576i/
50i480i/
59.94i
720P/
50PDVCPRO
HD720P/50P4chAUTO720P/
50P
4ch720P/
59.94P
576i/50iDVCPRO HD
720P/50P...](http://img.usermanuals.tech/thumb/58/76175/w300_aghpg10_en_om_d-68.png "Page 69
69
Displays
[For 50 Hz system format regions]
Format
settingRecording statusOutput
settingOutput status
SYS
FORAMT1394 recording/
playback formatRecording/
playback
audio
channelsCMPNT/
SDI SELSDI OUTSDI OUT
AUDIOCOMPONE
NT OUTVIDEO OUTPlayback 1394
output
1080i/
50iDVCPRO
HD1080i/50i4chAUTO1080i/
50i
4ch1080i/
59.94i
576i/50iDVCPRO HD
1080i/50i 1080i1080i/
501080i/
59.94i
576i576i/
50i480i/
59.94i
720P/
50PDVCPRO
HD720P/50P4chAUTO720P/
50P
4ch720P/
59.94P
576i/50iDVCPRO HD
720P/50P...")
69 Displays [For 50 Hz system format regions] Format settingRecording statusOutput settingOutput status SYS FORAMT1394 recording/ playback formatRecording/ playback audio channelsCMPNT/ SDI SELSDI OUTSDI OUT AUDIOCOMPONE NT OUTVIDEO OUTPlayback 1394 output 1080i/ 50iDVCPRO HD1080i/50i4chAUTO1080i/ 50i 4ch1080i/ 59.94i 576i/50iDVCPRO HD 1080i/50i 1080i1080i/ 501080i/ 59.94i 576i576i/ 50i480i/ 59.94i 720P/ 50PDVCPRO HD720P/50P4chAUTO720P/ 50P 4ch720P/ 59.94P 576i/50iDVCPRO HD 720P/50P...
Page 70
![Page 70
70
Basic operations on the setting menus
1
Hold down [POWER] for at least 2 seconds
to turn the power on.
2 Press [MODE] to switch to the thumbnail
display off screen.
106 mn12
HD720P60
1C
H2C
H
3 Press [MENU] to display the menu.
Example:
MAIN MENU
PUSH MENU TO EXIT
1 . SW MODE2 . RECORDING SETUP
3 . PLAYBACK FUNCTIONS
4 . AV OUT SETUP
5 . DISPLAY SETUP
6 . CARD FUNCTIONS
7 . OTHER FUNCTIONS
4 Using [STOP] and [PLAY], move the
highlighting to the function to be set.
5 Press [STILL] to display...](http://img.usermanuals.tech/thumb/58/76175/w300_aghpg10_en_om_d-69.png "Page 70
70
Basic operations on the setting menus
1
Hold down [POWER] for at least 2 seconds
to turn the power on.
2 Press [MODE] to switch to the thumbnail
display off screen.
106 mn12
HD720P60
1C
H2C
H
3 Press [MENU] to display the menu.
Example:
MAIN MENU
PUSH MENU TO EXIT
1 . SW MODE2 . RECORDING SETUP
3 . PLAYBACK FUNCTIONS
4 . AV OUT SETUP
5 . DISPLAY SETUP
6 . CARD FUNCTIONS
7 . OTHER FUNCTIONS
4 Using [STOP] and [PLAY], move the
highlighting to the function to be set.
5 Press [STILL] to display...")
70 Basic operations on the setting menus 1 Hold down [POWER] for at least 2 seconds to turn the power on. 2 Press [MODE] to switch to the thumbnail display off screen. 106 mn12 HD720P60 1C H2C H 3 Press [MENU] to display the menu. Example: MAIN MENU PUSH MENU TO EXIT 1 . SW MODE2 . RECORDING SETUP 3 . PLAYBACK FUNCTIONS 4 . AV OUT SETUP 5 . DISPLAY SETUP 6 . CARD FUNCTIONS 7 . OTHER FUNCTIONS 4 Using [STOP] and [PLAY], move the highlighting to the function to be set. 5 Press [STILL] to display...