Panasonic Memory Card Portable Recorder AG-HPG10P Operating Instructions

41
Playback
1  Display the thumbnail display screen.
2 Press [MENU].
3  Using [STOP], [PLAY] and [STILL], select 
“PROPERTY” – “DEVICES” – “SD CARD”, 
and press [STILL].
The following information is displayed.
SD STANDARD:Whether the SD memory 
card has been formatted 
in compliance with the SD 
standard is displayed.
SUPPORTED: The card format 
complies with the SD standard.
NOT SUPPORTED: The card 
format does not comply with the 
SD standard.
USED:Used memory [bytes]
BLANK:Free memory [bytes]...

Clip playback
42
Playing back clips
Basic playback operations 
Play ()
When this button is pressed during stop, playback begins from the start of the selected 
clips. When it is pressed during playback, the variable speed search mode (page 43) is 
set, and the clips are played back at the 1x speed.
Rapid forward playback ()
When this button is pressed during playback, the clip currently selected is played rapidly 
in the forward direction (at 4x normal speed). When the thumbnail image is released, this...

43
Playback
Variable-speed searches
You can change the playback speed and search 
for specific locations.
1  Press [PLAY] during playback.
1X  is displayed.
2  Press [PAGE/AUDIO MON/VAR], and change 
the playback speed.
X 
 /X  or X  /X  is displayed.
•  Each time the button is pressed, the playback 
speed changes by one setting in the following 
sequence: 1/5x, 1x, 2x, 4x, 12x and 24x. No 
sound will be played back at the 12x or 24x 
speed.
•  Use the “+” to change the speed in the 
forward direction,...

44
Clip playback (continued) 
Playback from text memo position
1  Display the thumbnail display screen.
2  Press [MENU].
3  Using [STOP], [PLAY] and [STILL], select 
“THUMBNAIL” – “TEXT MEMO CLIPS”, and 
press [STILL].
Thumbnails of the clips to which text memos 
were added now appear at the top of the LCD 
monitor screen. Information on the text memo 
of the clip selected by the pointer appears at 
the bottom of the LCD monitor screen.
4  Using [FF] and [REW], move the cursor to 
the clip which is to be...

45
Playback
Deleting text memos
1 Proceed with steps 1 to 4 in “Playback from 
text memo positions,” and select the text 
memos in the clips.
2 Move the cursor to the text memo to be 
deleted, and press [STILL].
3 Press [MENU], and then select 
“OPERATION” – “DELETE” using [STOP], 
[PLAY] and [STILL].
4 Select “YES”, and press [STILL].
The text memo is now deleted.
Dividing and copying clips using text 
memos
1 Proceed with steps 1 to 4 in “Playback from 
text memo positions,” and select the text 
memos...

46
You can connect an external monitor to the output connector of the unit, output clips to the external monitor 
and play them back on the monitor.
Outputting images to an external monitor for playback
Setting the outputs
1  Hold down [POWER] for at least 2 seconds to turn the power on.
2 Press [MODE].
The thumbnail display off screen appears.
3 Press [MENU].
4  Using [STOP] and [PLAY], select “AV OUT SEUP” setting item, and press [STILL].
5  Using [STOP] and [PLAY], select item, and press [STILL].
6...

47
Playback
CMPNT/SDI SEL :This is used to set the format of the D connector output and HD/SD-SDI output signals.
(When SYSTEM 
FREQ is set to 59.94 
Hz)AUTO  Signals are output in the format in which they were recorded.
1080i 720p signals are cross-converted to 1080i signals, and output.
480i 480i format signals are output; 720p/1080i signals are down-converted to 480i 
and output.
(When SYSTEM 
FREQ is set to 50 Hz)AUTO Signals are output in the format in which they were recorded.
1080i 720p signals...

48
Recording data on P2 cards
1394 input recording
You can connect a digital video component equipped with a 1394 connector, and digitally record video 
signals, audio signals or time codes, etc. on the unit.
1  Hold down [POWER] for at least 2 seconds 
to turn the power on.
The thumbnail screen appears.
2 Press [MODE].
The thumbnail display off screen appears.
106 mn12
HD720P60
1C
H2C
H
3 Press [MENU].
4  Using [STOP], [PLAY] and [STILL], select 
the “RECORDING SETUP” – “SYS FORMAT” 
setting, press...

Recording
49
•  Before connecting or disconnecting the 1394 cable, you must turn off the power of the component 
connected to the unit.
•  When connecting the unit to a component which uses a 6-pin type of 
1394 connector, thoroughly check the 1394 cable and shapes of the 
connectors at its ends before initiating the connection. Connecting the 
cable the wrong way round may result in damaging the unit’s inside 
parts and trouble. Also connect the 1394 cable to the component 
equipped with the 6-pin...

50
You can connect a hard drive equipped with a USB 2.0 or 1394 connector, and copy data from P2 cards 
onto the hard drive.
The following conditions must be met when using a USB connection.
•  The PC with the hard drive must run Windows 2000 or Windows XP.
•  The USB dedicated driver (provided on the CD-ROM supplied) must be installed.
•  USB 2.0 (High Speed, Mass Storage Class) must be supported (neither USB 1.1 nor USB 2.0 (Full 
Speed or Low Speed) is supported).
•  Only one PC must be connected.
•...