Home > Panasonic > Chair/Seating > Panasonic Massage Lounger Ep1061 Operating Instructions

Panasonic Massage Lounger Ep1061 Operating Instructions

Download as PDF Print this page Share this page

Have a look at the manual Panasonic Massage Lounger Ep1061 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

View all the pages

Add page 11 to Favourites

image text

Enable zoom

11 10
1. Check the Surrounding Area
zCheck that there is nothing behind the unit.
xCheck that there is enough room to recline the unit.
•In the interests of safety, the unit may stop moving if it hits
something while reclining.
2. Check the Unit
zLift up the pillow and the center cushion to check
that there are no rips in the fabric of the back
cushion, etc.
xCheck that the power plug has not been damaged
or has pins or dust sticking to it. AFTER CHECKING THE SURROUNDING AREA, TURN ON THE POWERBEFORE USING THE UNIT
Do not leave
anything here.
16in.
(40cm)16in.
(40cm)
Main Cushion Fabric
Check
3. Turn the Power On
zPlug the power plug into the power socket.
xTurn the lock switch to the “open” position.
cTurn on the power switch on the back of the unit.When plugging the unit in, make sure that there is at least 4in.
(10cm) slack in the power cord.
(Take care to ensure that the power cord is not caught by the
unit when it reclines.)
2
3
1
on
off
lock openlock switch
1. After Carrying Out Safety Checks, Turn the Unit On (See Page 11)
zPlug the power plug into the power socket.
xTurn the lock switch to the “open” position.
cTurn on the power switch on the back of the unit.• Please always check for the following before using the unit.
- Check that there is no person, pets, or obstacles around the unit.
- Check that there are no rips in the fabric.
2. Press button.
•When you press button, the Programmed Operation and Leg Massage
Buttons will flash. If the cover of the controller is open, then the Manual Operation Selection Buttons will flash.
3. Select the Desired Program or the Desired Movement on the Manual Operation
(See details on page 14)
Programmed Operation• Ideal for people who feel tired all over.
• Ideal for people who want to operate the massage lounger simply.zSelect the required program.
xPress the Neck/Shoulder or Lower Back Buttons if you want to focus on a particular area.
cThe chair will recline to the optimum angle for the massage. The massage will then begin
and continue until the end of the selected program is reached, at which time the massage
will automatically stop. An average program massage is 15-17 minutes.
Manual Operation • Used for selecting a particular massage movement or area to be massaged.
• Ideal for people who want to adjust movement and location during the course of a massage.
• Ideal for people who want just a little more on the shoulders at the end of their massage.zOpen the cover of the controller and select the massage required.
xThe seat will automatically recline to the optimum massage position.
cAdjust the position and intensity of the massage rollers.
vPress
button
to complete the massage.
4. Adjust the Angle of the Backrest and Legrest (See Page 13)
•Adjust the angle of the backrest and legrest to the most comfortable position.•When retracting the backrest, as the massage heads must be retracted in the interests
of safety there may be a slight delay before the backrest actually starts to retract.
Please continue to hold down the Reclining Button until the backrest is fully retracted.
5. Turn the Power Off to Finish the Massage
(See Page 20)
zTurn the power switch to the “off” position.
xTurn the lock switch the “lock” position.
cUnplug the power cord.
•Here you will find an overview of how to use the massage lounger. Please refer to the pages shown for further details.HOW TO USE THE MASSAGE LOUNGER — INTRODUCTION
2
3
1
on
off
lock openlock switch
32
1
on
off
lock openlock switch
If excessive pressure is applied to the massage heads during upper body massage, in the interests
of safety the massage heads may stop moving. If this occurs, raise your body slightly before
restarting it. (This may happen more frequently for people with a weight of 220 lbs. or more.)
If the massage mechanism stops (or if all markings and buttons on the controller start to flash), turn
off the power switch, wait for approximately 10 seconds, and then turn the power switch on again.
After each use•Be sure to tum the power switch to “off”.
•To prevent children from using this unit, lock the power switch by moving the
operating lock switch to the “lock” position.
•As a further precaution, unplug the power cord from the outlet after each use.NOTE:Be careful not to pinch the cord under the leg frames of the chair or any other objects.
NOTE:The operating lock
switch prevents the unit
from being turned on
when switch is in the
“lock” position.

Add page 12 to Favourites

image text

Enable zoom

13 12
1. Reclining The Seat
•Hold down the Reclining Button to recline the seat and raise the legrest.
•When both the backrest and legrest have been extended as far as possible
you will hear a “peep, peep, peep” sound.
•When first using the unit, please do not fully recline the seat.
2. Retracting The Seat
•Check that there is nothing behind the seat or under the legrest.
•Hold down the Reclining Button to retract the backrest and lower the legrest.
•When both the backrest and legrest have been retracted as far as possible
you will hear a “peep, peep, peep” sound.
•When retracting the backrest, as the massage heads must be retracted in
the interests of safety there may be a slight delay before the backrest
actually starts to retract. Please continue to hold down the Reclining Button
until the backrest is fully retracted. RECLINING THE SEAT
CAUTION•Slowly sit down after checking the position of the massage heads. Do not exceed the maximum user weight of 264 lbs. (120kg). Before sitting down, you must first check the
position of the massage heads with your hands. If you do not check the position of the massage heads then this
can lead to injury or the cause of the unit to malfunction.BEFORE SITTING DOWN•When the massage does not feel strong enough, lift up the
pillow and carry out the massage again.
•To make the massage even stronger, the center cushion
with integrated pillow can also be flipped up after unclipping
it at the bottom.ADJUSTING THE PILLOWADJUSTING THE SEAT•The massage heads are normally in the retracted position
(to the left and right at the lower part of the backrest).
•Do not sit down if the massage heads are not in the
retracted position. Instead, push button twice to retract
the massage heads to the proper position. (If button is
pushed during the massage, then the massage heads will
not be retracted.)
•Please do not sit on the controller as the reclining button
may be pressed causing the seat to automatically recline.Sit Down Only When the Legrest is Lowered•If you sit on the unit when the legrest is raised, there is the
possibility that it may fall over and you may be injured.
•When the legrest is raised, press button to lower the
legrest before sitting down.WARNING:To avoid the risk of personal injury, do not put your fingers or
any part of your body in the mechanical section of the
legrest.
reclining
reclining
Approx. 170° Angle
ReclinedApprox. 120°
Approx. 85°
Angle
Raised
Approx. 0°
Angle
Reclined Angle
Raised
reclining
PressPress Press
•To open the leg massager for a soles feet massage, grab the top of part of the ottoman on both sides and fold
out and away from you.NOTE:•DO not sit on or get off the lounger by standing on the legrest while it is folded down.
Always remove your feet from the massager prior to standing.
•DO not open or close leg massager while reclining.MASSAGE FOR SOLES OF FEET
NOTE:Position the chair at least 16 in. (40cm) away from any wall or other obstacle to ensure adequate reclining space.
CAUTIONTo avoid personal injury, after use, always be sure to return the legrest and backrest to their resting positions
(legrest lowered and backrest raised).
Be sure that there is no person or pet under the legrest before lowering the legrest to its resting position.WARNING:To avoid the risk of personal injury, do not put your fingers or any part of your body in the mechanical section of
the legrest.

Add page 13 to Favourites

image text

Enable zoom

Add page 14 to Favourites

image text

Enable zoom

4. Selecting an Area for Concentrated Massage
•Please see Page 21–23 for details regarding the programs.
7. Auto Stop in Programmed Operation
When the selected program has been completed, the unit will automatically come to a stop.
(Although programmed operation lasts for approximately 15 minutes (12–17 minutes), this will vary according to
the shoulder position and program selected, whether or not tapping is on or off, and the weight of the person
using the unit.)
•The massage heads will move to the retracted position and stop.
•The ON/OFF lamp will flash until the heads have stopped moving.
•If you want to start another massage, please press button.
•Please rest at least 10 minutes between massages.
8. Stopping Programmed Operation
Press button to stop programmed operation.
•The ON/OFF lamp will continue to flash until the massage heads have returned to the retracted position.
9. Stopping the Massage Immediately
Press button to stop programmed operation immediately.
•All movement will stop immediately.
•The massage heads will not return to the retracted position, which may make sitting in the seat somewhat
uncomfortable.
•Please press button twice in order to return the massage heads to the retracted position.
Massaging the Lower Back•Press this button to focus the program on the lower
back.(The neck and
shoulders will also be
massaged slightly.)•Press the button
again to toggle off.
The Selected Program will Start•It is possible to change the program
selected and the desired movement
mid-way through a massage.
•In Programmed Operation, the leg massage begins at the same time.
It is possible to stop or change the intensity of the leg massage during the program. (Please see Page 18.)
•When retracting the backrest, as the massage heads must be retracted in the interests of safety there may be
a slight delay before the backrest actually starts to retract. Please continue to hold down the Reclining Button
until the backrest is fully retracted. The Seat Automatically Reclines to the Massage Position•Initial position if auto recline is for both back and open ottoman operation. (for soles and feet.)
•To recline further, please use the recline button, but it is not recommended to keep the ottoman open.
15 14
PROGRAMMED OPERATION•Please check that there are no children or pets in the vicinity of the unit before use.
programmed operation
whole backgentle storong
neck roller position
reclining
programmed
operation
/manual
operation
lower back neck, shoulder
tap on/off vibration on/off
1
2 3
4
5
1. Press button
•The ON/OFF lamp will come on.
•You can now select either strong or gentle or one of the manual settings
that can be accessed by opening the cover of the controller.
2. Select the Program You Want
•See Page 21 for details regarding the content of each of these
programs.Vigorously Massage the Whole Back•Strong uses mainly a kneading massage and Shiatsu massage to
relax stiff muscles.
•This type of massage is ideal for
people with stiff muscles
throughout their entire back.
•Massage starts out predominantly in
the upper back.Gently Massage the Whole Back•This type of massage is ideal for
people who are feeling tired or weary.
•It is gentler than shiatsu massage -
more like a sewedish palm massage.
•When the Shoulder Position Indicator is flashing, adjust the position of
the massage heads (upper roller) so that they lightly touch the shoulder.
•The shoulder position can be adjusted up and down 4in. (10cm).
•When it is not possible to correctly adjust the shoulder position, slide
your body down and try adjusting it again.
Normal Position
(EP1061)Massage Position
Approx. 14°
Raised Approx. 3° Reclined
Reclining
In this comfortable
position it is possible to
massage from the neck
to the soles of the feet.
Normal Position
(EP1060)Massage Position
Approx. 60°
Raised Approx. 14° Reclined
Reclining
In this comfortable
position it is possible to
massage from the neck
to the soles of the feet.
programmed operation
whole backgentle strong
programmed operation
whole backgentle strong
Press
Press
• Lightly touching the shoulder.
Too high
Correct position
Too low
Massaging the Neck and Shoulders•Press this button to focus the program on the neck
and shoulders.
(The upper and lower
back will also be
massaged slightly.)
•Press the button
again to toggle off.
lower back neck, shoulder
lower back neck, shoulder
5. Removing Vibration and Tapping from Programs
Removing Tapping from Programmed Operation•Press this button to remove tapping in
programmed operation. (The tapping will change
to a kneading massage.)
* Press the button
again to restore
tapping to the
program.
Removing Vibration from Programmed Operation•Press this button to remove vibration in programmed
operation. (The vibration will change to a kneading
massage.)
* Press the button
again to restore
vibration to the
program.
tap on/off vibration on/off
tap on/off vibration on/off
PressPress
PressPress
•For Tapping B, and Vibration, unless the massage heads are actually touching the body then you may not feel
anything.
3. Adjusting Shoulder Position
•When programmed operation begins, the seat automatically reclines to the massage position where the
massage heads carry out a Shiatsu massage in the area around the shoulders. During the time that the
Shoulder Position Indicator is flashing (approx. 20 seconds), use the Shoulder Position Adjustment Button to
adjust the position of the massage heads, limiting how high they will go.
Approximate positions for adjusting the position of the rollers are shown below.
• It is possible to change the position of the rollers
during the massage.
• As the position of the shoulders will change when
the reclining angle is changed during a massage,
please readjust the shoulder position every time
you change the reclining angle.
• 5-stage (up-down approx. 4in.) adjustment.
neck roller position
neck roller position
neck roller position
6.1ft
5.2ft
4.6ft Up Down Approximate Body Height
PressPress
6. Adjusting Massage Intensity
•Massage intensity can be adjusted up to 3 levels.
•When the massage heads reach their limit you will hear a “peep,
peep, peep” sound.
intensity
intensity
Increasing massage intensity Decreasing massage intensity
PressPress

Add page 15 to Favourites

image text

Enable zoom

Add page 16 to Favourites

image text

Enable zoom

17 16
MANUAL OPERATION
neck roller position
reclining
programmed
operation
/manual
operation
intensityroll manual operation
whole back
regional tap A vibration tap Bswedish shiatsu knead
position
1
3
4
1. Press button
•The ON/OFF lamp will come on.
•You can now select either Strong or Gentle or one of the manual
settings that can be accessed by opening the cover of the
controller.
2. Open the Cover of the Controller
•All of the manual operation buttons will start
to flash.
3. Selecting the Massage Type Required
•Press the button of the massage you require.
The button will be lit.
•The seat will automatically recline to the massage position.
E.g. Selecting Knead.
4. Adjusting Manual Massage Settings
Adjusting the Vertical Position of the Massage Heads•The massage heads will move a little each time the button is
pressed. If you hold down the button, the massage heads will
continue to move until you release the button. When the
massage heads reach their limit you will hear a “peep, peep,
peep” sound.Adjusting the Width between Massage Heads•Vibration, Tap, Shiatsu Whole Back Roll, and Regional Roll
can be adjusted in 5-stages while Swedish (gentle) can be
adjusted in 3-stages.
•As Swedish covers the entire width of the back, it is not
possible to adjust width settings.
•The massage heads will move a little each time the button is
pressed. If you hold down the button, the massage heads will
continue to move until you release the button.
•When the massage heads reach their limit you will hear a
“peep, peep, peep” sound.
•As Roll or combining Roll with other massages sometimes
produce an especially strong massage, adjustment is limited
to medium or weak.
MANUAL OPERATION FOR THE UPPER BODY
neck roller position
reclining
programmed
operation
/manual
operation
intensityroll manual operationwhole back
regional tap A vibration tap Bswedish shiatsu kneadposition
slow fastleg massage
roll manual operation
whole back
regional tap A vibration tap Bswedish shiatsu knead
roll manual operation
whole back
regional tap A vibration tap Bswedish shiatsu knead
Combining Massages•It is possible to combine massage types.
•It is not possible to combine massage types in the same category.E.g.1 Adding Tap B when Knead is selected.
roll manual operation
whole back
regional tap A vibration tap Bswedish shiatsu knead
roll manual operation
whole back
regional tap A vibration tap Bswedish shiatsu knead
E.g.3 Toggling off Roll pressing it again.
roll manual operation
whole back
regional tap A vibration tap Bswedish shiatsu knead
roll manual operation
whole back
regional tap A vibration tap Bswedish shiatsu knead
E.g.2 Adding Roll to the selection.
roll manual operation
whole back
regional tap A vibration tap Bswedish shiatsu knead
roll manual operation
whole back
regional tap A vibration tap Bswedish shiatsu knead
E.g.2 Changing to a massage type outside the category.
(Changing to Tap B when Knead is selected.)
• When Knead is combined with Tap B, deselecting Knead will leave only Tap.
roll manual operation
whole back
regional tap A vibration tap Bswedish shiatsu knead
roll manual operation
whole back
regional tap A vibration tap Bswedish shiatsu knead
roll manual operation
whole back
regional tap A vibration tap Bswedish shiatsu knead
Press
Press
Press
PressPressPress
position
position
Raising the massage heads Lowering the massage heads
Press
Press
position
position
Increasing the width Decreasing the width
PressPress
Roll, Roll + (Shiatsu, Tap B, Tap A, Vibration) Combination..................................Weak/Medium only
Roll + (Knead, Swedish Combination) ...................................................................Weak only
•For Tap B, Swedish, and Vibration, unless the massage heads are actually touching the body then you may
not feel the movement.
5. Auto Stop in Manual Operation
•A timer will automatically stop the unit approximately 15 minutes (15–17 minutes) after the massage started.
(This is to prevent overuse in the interests of safety.)
• The massage heads will move to the retracted position and stop.
• The ON/OFF lamp will flash until the heads have stopped moving.
• If you want to start another massage, please press button.
• Please rest at least 10 minutes between massages.
6. Stopping Manual Operation
Press button to stop manual operation.
• The ON/OFF lamp will continue to flash until the massage heads have returned to the retracted position.
Changing Massage TypesE.g.1 Changing massage types in the same category.
(Changing to Shiatsu when Knead is selected.)
roll manual operation
whole back
regional tap A vibration tap Bswedish shiatsu knead
roll manual operation
whole back
regional tap A vibration tap Bswedish shiatsu knead
Press
Adjusting Massage Intensity•Massage intensity can be adjusted up to 3 levels.
•When the massage heads reach their limit you will hear a “peep,
peep, peep” sound.
intensity
intensity
Increasing massage intensity Decreasing massage intensity
PressPress

Add page 17 to Favourites

image text

Enable zoom

Add page 18 to Favourites

image text

Enable zoom

19
1. Check that there is Nothing Under the
Backrest or the Legrest. RETURN THE SEAT TO THE ORIGINAL POSITIONAFTER COMPLETING THE MASSAGE
Check that
there is nothing
here
Check that
there is nothing
here
2. Return the Seat to the Upright Position.
•When returning the seat to the upright position, as it may
take some time for the massage heads to return to the
retracted position, please continue to press the Reclining
Button until the seat is fully upright.
reclining
Closing the leg
massager
3. Place the Controller in its Pocket
•Using the controller pocket as a grip to help you stand up
can place excessive force on the pocket, which can cause
it to rip. Please refrain from doing so.
4. Return the Center Cushion to its Original
Position.
Press
•The leg massager has two functions.
The massager can also massage the soles of the feet.1. Press button
•The programmed operation and leg massage button will flash.
2. Press the Leg Massage button
•The leg massage will start.
•The speed of the massage will be displayed.
•It is possible to adjust the reclining angle during the massage.
3. Adjusting Massage Speed
•Leg massage intensity can be adjusted in 2-stages.
4. Leg Massage Auto Stop
•A timer will automatically stop the unit approximately 15
minutes (15–17 minutes) after the massage started.
•If you want to start another massage, please press button.
5. STOPPING MANUAL OPERATION
Press button to stop the leg massage.
18
LEG MASSAGE IN MANUAL OPERATION (
EP1061)
slow fastleg massage
slow fastleg massage
slow fastleg massage
slow fastleg massage
slow fastleg massage
slow fast Off
Press
Press Press Press
Soles of feet Calves
• If your calves are not in the correct position in the legrest, please adjust your legs so that they are. 1. Press button
•The programmed operation and leg massage button will flash.
2. Press the Leg Massage button
•The vibration massage will start.
•The strength of the massage will be displayed.
•It is possible to adjust the reclining angle during the massage.
3. Adjusting Massage Intensity
•Leg massage intensity can be adjusted in 2-stages.
4. Leg Massage Auto Stop
•A timer will automatically stop the unit approximately 15
minutes (15–17 minutes) after the massage started.
•If you want to start another massage, please press button.
5. STOPPING MANUAL OPERATION
Press button to stop the leg massage.LEG MASSAGE IN MANUAL OPERATION (
EP1060)
gentle strongleg massage
gentle strongleg massage
Press
gentle strongleg massage
gentle strongleg massage
gentle strongleg massage
Gentle Strong Off
Press Press Press
NOTE:
(EP1061) DO NOT sit on or get off the lounger by standing on the legrest while it is folded down. Always
remove your feet from the massager prior to standing.
(EP1060/EP1061) Integrated Timer to Prevent Overuse
•An integrated timer prevents overuse of the unit.
•When using manual operation, the timer automatically stops operation after 15 minutes (15–17 minutes).
* If you want to continue to use the unit, please ensure that you have a break of at least 10 minutes
between massages to allow your body to rest.

Add page 19 to Favourites

image text

Enable zoom

Add page 20 to Favourites

image text

Enable zoom

21
•The movements below are shown in simplified form for the sake of illustration.
•When the programs have finished the unit will automatically stop. (Although programmed operation lasts for
approximately 15 minutes (12–17 minutes), this will vary according to the shoulder position and program selected,
whether or not tapping is on or off, and the weight of the person using the unit.)STRONGGENTLEDETAILS REGARDING PROGRAMMED OPERATION1Roll, Shiatsu and
Knead/Roll
Knead, Roll
and Shiatsu/VibrationSwedish, Tap B/
Roll and ShiatsuShiatsu and
Tap B/RollKnead/Tap B
and Roll Tap B/Roll,
Tap B and KneadKnead/Roll, Tap B
and Knead/Tap B/RollKnead and
ShiatsuTap B, Tap B/
Roll and Shiatsu
2
3
6
5
4
7
8
9
Shiatsu, Tap A
and Roll
10
1Roll, Knead and
Swedish/Tap A/Roll
Swedish and
Swedish/Tap A/RollSwedish, Shiatsu and
Swedish/Tap A/RollSwedish/Roll and
Swedish/Tap A/RollShiatsu, Vibration/Roll
and Shiatsu/Vibration Tap A, Swedish/Roll
and Swedish/Tap A/RollSwedish/Roll, Swedish/
Tap A/Roll and Swedish/
Vibration/RollSwedish/Vibration
Swedish/Vibration and
Swedish/Tap A/Roll
2
3
6
5
4
7
8
9
Swedish/Tap A/Roll,
Swedish and Roll
10
20
1. Turn Off the Power
zTurn the power switch to the “off” position.
xTurn the lock switch to the “lock” position.DISCONNECT THE POWER•Always turn the power switch to the “off” position and the lock switch to the “lock” position.
Failure to do so may lead to accidents if children play with the unit.
•Do not pull on the power cord when unplugging the unit from the power supply. Always hold the power plug itself.
Failure to do so may lead to electric shock or short-circuits.
•Always unplug the unit from the power supply when not in use.
Failure to do so may lead to insulation deterioration due to dust or moisture, which may in turn lead to short-
circuits or fire.CAUTION
on
off
lock openlock switch
2. Unplug the Power Cord

All Panasonic manuals Comments (0)

Panasonic Massage Lounger Ep1061 Operating Instructions

Related Manuals for Panasonic Massage Lounger Ep1061 Operating Instructions