Panasonic Lumix DMC FZ30 User Manual

Playback (advanced)
111VQT0R81
[PLAY] mode menu (Refer to P101 for how to select the menu.)
3Select [YES] or [NO] and set it.
 When you select [YES], the picture is 
overwritten.
When resized pictures are overwritten, 
they cannot be restored.
 When the original picture is protected, 
you cannot overwrite the resized 
picture.
 When you select [NO], a resized picture 
is newly created.
Use this function when you trim needed 
parts of the recorded picture.
1Select the picture to trim and set 
it.
 The...

Playback (advanced)
112VQT0R81
2Enlarge or decrease the picture.
3Shift the picture and press the 
shutter button to set.
4Select [YES] or [NO] and set it.
 When you select [YES], the picture is 
overwritten.
When trimmed pictures are overwritten, 
they cannot be restored.
 When the original picture is protected, 
you cannot overwrite the trimmed 
picture.
 When you select [NO], a trimmed 
picture is newly created.
 The picture size of the trimmed pictures 
may become smaller than that of the...

Playback (advanced)
113VQT0R81
[PLAY] mode menu (Refer to P101 for how to select the menu.)
Images taken using [ ] aspect can be 
converted to [ ] or [ ] for printing.
1Select [ ] or [ ].
 Only pictures taken using [ ] aspect 
can be converted.
2Select the picture to convert and 
set it.
 Selecting and setting pictures with 
aspects other than [ ] will display 
[CANNOT BE SET ON THIS 
PICTURE].
3Determine the horizontal position 
and set with the shutter button.
 For pictures rotated vertically use...

Playback (advanced)
114VQT0R81
[PLAY] mode menu (Refer to P101 for how to select the menu.)
 The following pictures cannot be 
converted.
– Pictures with audio
– Motion pictures
– Pictures recorded after setting the 
quality to [TIFF] or [RAW]
 You may not be able to convert pictures 
taken on other equipment.
 Files not conforming to the DCF standard 
cannot be converted. DCF is an 
abbreviation of [Design rule for Camera 
File system], stipulated by JEITA [Japan 
Electronics and Information...

Playback (advanced)
115VQT0R81
[PLAY] mode menu (Refer to P101 for how to select the menu.)
 [CLEAN UP] is a function to recover the 
speed of writing into a free space in the 
card. Therefore, pictures and data already 
recorded in the card will not be erased.
 When you start clean-up, it may take time 
to complete.
 Depending on the type of card, 
[CLEAN UP] may not be effective.
 [CLEAN UP] does not support 
MultiMediaCard.
 During clean-up do not turn the camera off. When you clean up the card,...

Playback (advanced)
116VQT0R81
Playing Back Pictures on a TV Screen
∫Playing back pictures with AV cable 
(supplied)
 Turn the camera and the TV off.
1Connect the AV cable A 
(supplied) to the [AV OUT] socket 
of the camera.
 Connect the AV cable with the [ ] 
mark facing the [1] mark on the 
[AV OUT] socket.
 Hold the AV cable at B and insert 
straight in and take straight out.
2Connect the AV cable to the video 
input and the audio input sockets 
of the TV.
1 Yellow: to the video input socket
2...

Connecting to a PC or Printer
117VQT0R81
Connecting to a PC or Printer
Before Connecting to the PC or the Printer
[ : USB MODE]
Select the USB communication system 
before connecting the camera to your PC or 
your printer with the USB connection cable 
(supplied).
Set the items on [USB MODE] in the 
[SETUP] menu. (P24)
1Select [USB MODE].
2Select [PC] or [PictBridge (PTP)].
 If you connect the camera to a PC, 
select [PC]. (P118)
 If you connect the camera to a printer 
supporting PictBridge, select...

Connecting to a PC or Printer
118VQT0R81
Connecting to a PC
You can load pictures recorded with the 
camera to a PC by connecting the camera 
and PC.
The software [LUMIX Simple Viewer] or 
[PHOTOfunSTUDIO-viewer-] 
(for Windows
R) in the CD-ROM (supplied) 
allows you to load pictures recorded with 
the camera to a PC, print, or send them by 
e-mail easily.
If you use Windows
 98/98SE, install the 
USB driver and then connect it to the 
computer.
Refer to the operating instructions for PC 
connection for...

Connecting to a PC or Printer
119VQT0R81
∫Folder Composition
The folder structure of the card or 
MultiMediaCard is displayed as the 
illustration below.
1Folder number
2File number
3JPG: pictures
MOV: motion pictures
Files will be saved in each folder as follows.
 Image data of up to 999 pictures recorded 
by the camera can be included in 1 folder. 
If the number of picture data exceeds 999, 
another folder will be created.
 When you reset the file number or the 
folder number, select [NO.RESET] in...

Connecting to a PC or Printer
120VQT0R81
 If the remaining battery power is 
exhausted during communication, the 
recorded data may be damaged. When 
you connect the camera to the PC, use a 
battery with sufficient battery power (P13) 
or the AC adaptor (DMW-CAC1; optional).
 If the remaining battery power becomes 
low during communication, the power 
indicator blinks (P13) and the alarm 
beeps. In this case, stop the 
communication at once.
 While [ACCESS] is being displayed, do 
not disconnect the...