Panasonic LCD Projector Pt Vw440 Operating Instructions

ENGLISH - 61
Settings
Network
Select [Setting] from the Main Menu (see 
“Navigating through the menu” on page 36), 
then select the item from the sub-menu.
Remote ControlControl Panel
Projector name
You can change the projector name to be displayed 
on the network.
Press ▲▼ to select [Projector name], 1 ) 
and press  button.
Select characters with the ▲▼◄► 2 ) 
buttons and press the  
button to enter the projector name.
       Select [BS] to delete one character selected 
with the cursor in the input box...

Network
62 - ENGLISH
Settings
Network control
Set when you want to control the projector from a 
computer connected to the network.
Press ▲▼ to select [Network control].1 ) 
Press  button to select [On] 2 ) 
or [Off] with the ▲▼ buttons.
Network status
This function shows the LAN setting environment of 
the currently selected projector.
Press ▲▼ to select [Network status].1 ) 
Press  button or the ► button 2 ) 
to show the information of the current 
projector status.
AMX D.D.
This function allows the...

Network
ENGLISH - 63
Settings
Network connections
The projector has a network fuction, and the following operations are av\
ailable from the computer using the web 
browser control.
Setting and adjustment of the projector. z
Display of the projector status. z
Transmission of an E-mail message when there is a problem with the projec\
tor. z
Note
A LAN cable is required to use the network function. z
ComputerProjector
LAN cable (straight) LAN cable (straight)
Hub
 Notes on LAN network connections
A Web...

Network
64 - ENGLISH
Settings
Computer operation
Connection can be made with wired LAN. However, confirm to your system administrator on network settings 
before changing any settings.
Turn on the computer.1 ) 
Make the network setting according to your system administrator.2 ) 
If the projector settings are the default settings (See page 61), the computer can be used with the 
following network settings.
DHCPOff
IP address1 9 2 .1 6 8 .1 0 .1 0 1
Subnet mask255.255.255.0
Default gateway1 9 2 .1 6 8 .1 0...

Network
ENGLISH - 65
Settings
Description of each item  J
1 Page selection tabs
  Click these to switch pages.
2 Monitor information button 
Click this item, and the status of the projector is 
displayed.
3 Projector control button 
Click this item to display the projector control 
page.
4 Detailed set up button 
Click this item to display the advanced settings 
page.
5 Change password button
    Click this button to display the password change 
page.
6  Crestron RoomView button
    Click this button to...

Network
66 - ENGLISH
Settings
Error information page  J
If [Error (Detail)] is displayed in the self-diagnosis information display column on the [Projector status] screen, 
click the part to display the details of the error.
Depending on the nature of the error, the projector may be placed in the standby mode for its own protection.• 
When [FAILED] has appeared for an item
ParameterDescription
FA NTrouble has occurred in the fan or its drive...

Network
ENGLISH - 67
Settings
Basic control page  J
To move from another page, click [Projector control], then [Basic control].
1 Power standby/on control
2 Use these to select the input signals
3 Volume adjust
4 Switches image mode
5 Operation of AV mute
5
4
3
2
1
Detail control page J
Click [Projector control], then [Advanced control] to display the Detail control page.
1  Execute Auto setup function
2 Operations on Screen mode
3  Operations on Keystone function
4  Operations on Rear/Ceiling
5...

Network
68 - ENGLISH
Settings
Network config page J
You can change network settings on projector when connecting with the administrator authority.
LAN settings z 
Click [Detailed set up] in the menu.1 ) 
Click [Change] to change the LAN settings.2 ) 
 
To return to the previous window, click [Back]. z
Complete the detailed settings and  3 ) 
click [Next].
 
When [Next] is clicked, the next page appears, enabling   z
you to complete the detailed settings as desired.  
Settings performed here are the same...

Network
ENGLISH - 69
Settings
Ping test page  J
This page makes it possible to check whether the network is connected to the e-mail server, POP server, DNS 
server, etc.
Click [Detailed set up], then [Ping test] to display the Ping test page.
Display which appears when the connection
was successful.
Display which appears when the connection
failed.
1 Enter the IP address of the server to be tested.
2 Button for conducting the test.
21 

Network
70 - ENGLISH
Settings
E-mail set up page  J
With this projector, if a problem occurs or if the lamp usage time reaches a set value, an e-mail message can be 
sent to one or more preset e-mail addresses (maximum two addresses).
Click [Detailed set up], then [E-mail set up] to display the E-mail setup page.
1 Select Enable to use the e-mail function.
2 Enter the IP address or server name of the e-mail 
server (SMTP). The DNS server must be set if the 
server name is entered.
3 Enter the e-mail...