Panasonic LCD Projector Pt Vw440 Operating Instructions

ENGLISH - 51
Settings
Sound
Select [Sound] from the Main Menu (see 
“Navigating through the menu” on page 36), 
then select the item from the sub-menu.
Remote ControlControl Panel
Volume
Press ▲▼ to select [Volume] and then 1 ) 
press the  button.
Press ◄► to adjust the volume.2 ) 
Press  button to set the volume. z
OperationAdjustmentAdjustment 
range
Press ►.turn up the 
volume
Maximum 
value 63
Press ◄.turn down the 
volume
Minimum 
value 0
You can also press  buttons on  z
the remote control or...

52 - ENGLISH
Settings
Setting
Select [Setting] from the Main Menu (see 
“Navigating through the menu” on page 36), 
then select the item from the sub-menu.
Remote ControlControl Panel
Language
Press ▲▼ to select [Language].1 ) 
Press ► or the  button.2 ) 
Press ▲▼ to select the desired 3 ) 
language.
The language used in the On-Screen Menu is  z
available in English, German, French, Italian, 
Spanish, Portuguese, Dutch, Swedish, Finnish, 
Norwegian, Danish,  Polish, Hungarian, Romanian, 
Czech, Russian,...

Setting
ENGLISH - 53
Settings
Background
Select the background screen for when no input signal 
is detected.
Press ▲▼ to select [Background].1 ) 
Press the  button.2 ) 
Press ▲▼ to switch3 )  between each 
option as below.
BlueBlue colored background.
UserThe logo transferred by "Logo
Transfer Software *1 " is projected.
BlackBlack colored background.
" Logo Transfer Software" is included on the *1 : 
supplied CD-ROM.
Display
This function decides whether to display On-Screen 
Displays....

Setting
54 - ENGLISH
Settings
Logo PIN code change J
Logo PIN code can be changed to your desired four-
digit number.
Press ▲▼ to select [Logo PIN code 1 ) 
change] and press the  
button.
Current logo PIN code dialog box appears. z
Press ▲▼ to enter the current code, 2 ) 
press the ► button to fix the number 
and move the red frame pointer to the 
next box.
The New Logo PIN code input dialog box  z
appears. 
Repeat this step to set the new Logo 3 ) 
PIN code.
Attention
Be sure to note the new Logo PIN...

Setting
ENGLISH - 55
Settings
Direct on
Press ▲▼ to select [Direct on] and 1 ) 
then press the  button.
Press ▲▼ to switch between [On] and 2 ) 
[Off].
When this function is set to [On], the projector  z
will be automatically turned on just by 
connecting the AC power cord to a wall outlet.
Be sure to turn off the projector properly. If the  z
projector is turned off in the incorrect sequence, 
the [Direct On] function does not work properly.
Standby mode
This function can set the electric power when the...

Setting
56 - ENGLISH
Settings
Closed caption
[Only for NTSC, 480i input]
Press ▲▼ to select [Closed caption].1 ) 
Press ► or the  button to 2 ) 
enter the submenu.
Closed caption J
Press ▲▼ to select [Closed caption] 1 ) 
and then press the  button.
Press ▲▼ to select [Off], [CC 1],  2 ) 
[CC 2], [CC 3] or [CC 4].
Color J
Press ▲▼ to select [Color] and then 1 ) 
press the  button.
Press▲▼ to select [color] or [white].2 ) 
Note
The closed caption is mainly used in the north America.  z
This function shows...

ENGLISH - 57
Settings
Setting
PIN code lock J
This function prevents the projector from being 
operated by unauthorized persons and provides the 
following setting options for security.
Press ▲▼ to select the desired items 1 ) 
as below.
OffUnlocked.
On 1Enter the PIN code every time 
turning on the projector.
On 2
Enter the PIN code to operate 
the projector once the power cord 
is disconnected; as long as the 
AC power cord is connected, the 
projector can be operated without 
a PIN code.
Note
Whenever...

Setting
58 - ENGLISH
Settings
Note
[Noise reduction] and [Progressive] can not be  z
selected when [Video delay control] function is set 
to [On].
Filter counter
This function is used to set a frequency for the filter 
replacement.
Press ▲▼ to select [Filter counter].1 ) 
Press ►or the  button to 2 ) 
access the submenu items.
Filter counter J
Show the total accumulated time of the filter use timer 
setting.
Timer J
To set a timer. When the projector reaches the 
selected time the filter warning icon...

Setting
ENGLISH - 59
Settings
Warning log
This function records anomalous operations while the 
projector is in operation and use it when diagnosing 
faults.
Press ▲▼ to select [Warning log].1 ) 
Press ► or the  button to 2 ) 
display the latest warning message.
Up to 10 warning logs are displayed with the  z
latest warning message at the top of the list, 
followed by previous warning messages in 
chronological order.
Note
When the [Factory default] function is executed, all  z
the warning log records...

60 - ENGLISH
Settings
Select [Information] from the Main Menu (see 
“Navigating through the menu” on page 36).
Remote ControlControl Panel
Input Source Information 
Display 
The Information Menu is used for checking the status 
of the image signal being projected and the operation 
of the projector.
You can also Press the  button on the remote 
control to display the Information menu.
Press ◄► to switch between page 1 and 
page 2.
Input J
The selected input source is displayed.
System J
The selected...